Search results

  1. M

    Did BI5 v. 5.5.5.6 break discovery?

    I updated to 5.5.5.7 and discovery still not working. what could cause this? (Firewall or something else?)
  2. M

    Did BI5 v. 5.5.5.6 break discovery?

    I upgraded yesterday to 5.5.5.6 and now I cant get Camera Discovery to work. Did something change? I leave http:// blank and hit Find/Inspect and nothing comes up now. Or maybe something changed on my system? Like firewall settings?
  3. M

    Problems configuring Reolink 823-A with BI5

    AH!!! Did not know about this capability! makes sense now.
  4. M

    Problems configuring Reolink 823-A with BI5

    I can see the lens tracking me. (remember my mount is only 10-15 feet off the ground). When it suddenly moves away from me and goes to the front door (Preset 1). So I know its doing it. Just not sure why
  5. M

    Problems configuring Reolink 823-A with BI5

    On the Dahua camera, I have noticed that sometimes I will walk down the steps, into the yard toward the street, camera follows me as I walk around with the dog for maybe 1-2 minutes max and the camera will go back to preset 1 prior to 300 seconds (5 minutes). Any idea what can cause this? Any...
  6. M

    Problems configuring Reolink 823-A with BI5

    Thx for the recommendations
  7. M

    Problems configuring Reolink 823-A with BI5

    So I am still missing the beginning frames.. see attached. Anything else I can do? Also, Disk is at 99% and CPU runs typically 71-78% Using an Asus N501VW laptop with 24 gig RAM, i7-6700HQ CPU 2.6 GHZ, 64 bit Windows 10 Running 12 cameras. Mix of Dahua, 1 Reolink PTZ (I had 2 and replaced 1...
  8. M

    Problems configuring Reolink 823-A with BI5

    Is the attached pic what you mean by reducing the size?
  9. M

    Problems configuring Reolink 823-A with BI5

    Cut the size of your intrusion box in IVS. The camera needs to see something enter and exit the box to be most effective. The right side is tight to the right side of the frame and the left side includes the front door. Getting it smaller will let the camera see something definitively enter the...
  10. M

    Problems configuring Reolink 823-A with BI5

    Thx for your help. But I dont know what specifically I need to change here? What specific changes do I need to make "Don't use object detection in BI, use motion detection zones."
  11. M

    Problems configuring Reolink 823-A with BI5

    also, I am looking for a camera that would be wired and sits on a table. Need 2 way mic built in, IR support for day and night. Something that plays well with BI5
  12. M

    Problems configuring Reolink 823-A with BI5

    Do these settings look right? Im throwing in Blue Iris setting too. Right now, I am missing about the first 5-10 seconds when I come out the front door when viewing thru BI5.. Not sure why
  13. M

    Problems configuring Reolink 823-A with BI5

    What resolution on main ? Resolution on substream? What bit rate on substream?
  14. M

    Problems configuring Reolink 823-A with BI5

    What should these numbers look like. Getting a little choppy video
  15. M

    Problems configuring Reolink 823-A with BI5

    So Alarm track should be 300 sec and Record delay should be 300 sec? Most of my events are 4-5 minutes
  16. M

    Problems configuring Reolink 823-A with BI5

    I dont want a delay to record. Why under record does it force you to wait a minimum of 10 seconds?
  17. M

    Problems configuring Reolink 823-A with BI5

    thx, what is a good track time to use?
  18. M

    Problems configuring Reolink 823-A with BI5

    Is there a video that shows you how to setup tracking? I am following the instructions on the camera page here: AmazonSmile : Loryta Outdoor 4MP Starlight 25X Optical Zoom IR PTZ Smart AI IP Camera Support Auto-Tracking, PoE+ ,Perimeter Protection ,Face Detection,Smart Capture SD49425XB-HNR ...
  19. M

    Problems configuring Reolink 823-A with BI5

    There are 2 silica gel pacs inside the camera housing (where the reset button is inside)..in pretty tight..are those suppose to be removed?
  20. M

    Problems configuring Reolink 823-A with BI5

    so I changed the ethernet adapter to 198.168.50.100 and then now I can access the camera!
  21. M

    Problems configuring Reolink 823-A with BI5

    Are you sure Im supposed to be entering a gateway for an ethernet connection?
  22. M

    Problems configuring Reolink 823-A with BI5

    My laptop is connected to the router.. WIFI connection. I'm also using the same laptop's ethernet connection to configure the camera.
  23. M

    Problems configuring Reolink 823-A with BI5

    Just checked.. nothing on 108 on the router client list Im using Pale Moon 32 bit. So if I can access the camera using Pale Moon initially, I should be able to access it after I change the ethernet adapter back to "Obtain an IP automatically"? or should I actually be plugging the camera into...
  24. M

    Problems configuring Reolink 823-A with BI5

    So I hit reset and Im back into the camera menu. When I type 192.168.50.1 I get my router menu. See the before and after changes I made
  25. M

    Problems configuring Reolink 823-A with BI5

    OK, well I must be missing something here again. I was able to get into the cameras menu. I went under Network, TCP/IP, changed camera to 192.168.50.108 and Default gateway.. changed that to 192.168.50.1 (from 192.168.1.1). Hit save. Changed the Ethernet network adapter back to "Obtain IP...
  26. M

    Problems configuring Reolink 823-A with BI5

    So after changing the camera IP range to .50.xxx, I would go back into the laptop and change the ethernet setting for the TCP/IPv4 IP back to the .50.xxx not the .1.xxx and I should be able to access the camera again right?
  27. M

    Problems configuring Reolink 823-A with BI5

    I got it now. You are changing the IP address on the laptop so I can see the camera. Once I can see it, I can go into the cameras menus and manually set the IP address of the camera to be on my network. Got it. What I missed was my network being on .50.xxx not .1.xxx part (192.168.50.xxx...
  28. M

    Problems configuring Reolink 823-A with BI5

    So how do I change the cameras IP address to 192.168.50.108?
  29. M

    Problems configuring Reolink 823-A with BI5

    What happens if I plug the PTZ/POE+ directly into the router? If I enter into my brow So I'm not sure what you mean when you say if my router is on the IP Address range? Im on an Asus router. It says on main menu: Internet Status Connected, WAN IP: 192.168.1.XX. Under the LAN tab, it says...
  30. M

    Problems configuring Reolink 823-A with BI5

    I am using a USB ethernet adapter on the laptop running BI5 with ethernet going to router
Top Bottom