Search results

  1. H

    Dahua Cameras hacked

    Actually I disable upnp in the router and reported to other ports. I don't have the skillset to do what is advised but I bought time
  2. H

    Dahua Cameras hacked

    Thank you, 3 physical locations one one location attacked Now to learn an entirely new skillset Again, thanks
  3. H

    Dahua Cameras hacked

    Netgear nighthawk router not ISP provided I have BI on site when my PC is on. Just don't have the skillset to enable the cameras by lan or make them viewable elsewhere Again thanks, might just chuck the cams with 7 year old firmware and replace with dahu new ones with 2024 software, would...
  4. H

    Dahua Cameras hacked

    I think I am so misinformed it's pathetic I have used port forwarding alone with local PC with PC not on. I think you are alluding to letting BI being always on doing the work BI has for each camera its WAN address and ports used on router I was always afraid that without port forwarding and...
  5. H

    Dahua Cameras hacked

    I guess this link and screen cap from web interface says it The channel title is populated with garbage text that shows up on BI too in addition to web interface Factory reset camera made a really secure PW and still comes back Any solution Mainly 6 mp and 3mp IPC cameras some not with...
  6. H

    DH-IPC-HDW2831T-AS-S2 vs DH-IPC-HDW2831TP-AS-S2 and Firmware

    Thank you so very much !
  7. H

    DH-IPC-HDW2831T-AS-S2 vs DH-IPC-HDW2831TP-AS-S2 and Firmware

    Hey, guys As the post thread lists, what are the differences in the Two Dahua 8mp tourette cameras except one says 2831t vs 2831tp? IS it OEM, the Box it came in (TP version) has Dahua written all over it? For the life of me I wanted to locate the firmware since the date stamp on the box was...
  8. H

    Dahua Cameras in BI 5 only seen on LAN not WAN

    IP in camera's interface is LAN, port forwarding refers to internal IP though cameras accessed remotely by wan in remote BI interface
  9. H

    Dahua Cameras in BI 5 only seen on LAN not WAN

    I do not have the skillset to do anything else but port forwarding using the Dahua camera in BI plugging in the WAN address. If I plugged in the 192.168.1....... LAN I would not be available to see these cams remotely on a remote location with another BI setup only WAN seems to allow me to...
  10. H

    Dahua Cameras in BI 5 only seen on LAN not WAN

    Thank you. It doesn't show it open, I don't understand Error: I could not see your service on xx xxx xx xxx on port (1104) Reason: Connection timed out EDIT..FIXED ports were blocked by Verizon, changed ports and all is good, thank you so much Why were my 14 ports blocked?
  11. H

    Dahua Cameras in BI 5 only seen on LAN not WAN

    Hi 39 Dahua camera on BI 5, all 3-8MP and divided between homes The place I am at now will only show a camera on LAN not WAN At a remote facility all cameras work except again for this bank of cams Checked WAN address, it has not changed, port forwarding has been enabled for many months...
  12. H

    Random, I mean random spikes on CPU usage

    Everything works well, except when i do a timelapse or a straight continuous record. It records at the substream rez even if I untick or tick on record page record dual streams if possible. The only way to record high rez is unticking substream entirely Not a biggie but tis there a workaround?
  13. H

    Random, I mean random spikes on CPU usage

    Use the remote connect feature of Blue Iris to connect to another Blue Iris remote Location. Wouldn't that mean keeping TWO instances at two locations On for this to work?
  14. H

    Random, I mean random spikes on CPU usage

    I have 3 physical locations running blue iris at each of these locations The IP addresses (WAN) are different at all locations but to add cameras I use the WAN from those locations and vice versa I honestly never knew of any method other than port forwarding If i use for example 192.168.1.243...
  15. H

    Random, I mean random spikes on CPU usage

    When setting up a batch of cameras at a new location ( like a new house I bought) I use the WAN address in each of the cam setups with 4 ports that I port forward ( like enclosed photo)
  16. H

    Random, I mean random spikes on CPU usage

    Good point; I did opt pot on sign up to sharing data collection
  17. H

    Random, I mean random spikes on CPU usage

    I will let cyberghost run 24/7 going forwAED
  18. H

    Random, I mean random spikes on CPU usage

    Look at these stats, WOW!!
  19. H

    Random, I mean random spikes on CPU usage

    See y,ou're the pro I'm not All my cameras use WAN, I do not use 192.168.1.x for anything on BI camera setups , I do port forwarding to access my cameras at other homes I own where BI runs. I On a side note, i can tweak the substreams on the cam setup page right if I want slightly better...
  20. H

    Random, I mean random spikes on CPU usage

    I'm down to 30% CPU usage now, thanks to your folks, learned ALOT. Thanks so much again and happy holidays I guess I don't have to use substream enabling on my high end i9 10980 cpus since I get 30% cpu usage as is Again, thanks !
  21. H

    Random, I mean random spikes on CPU usage

    Done CPU Usage down CPU usage is down, but preview rectangle is blurry When I double click to go full screen it starts out blurry then gets back to its ultra sharpness. Normal?Also, recordings and time lapse, recorded at main stream quality? Again, thank you, suppose the tradeoff is lower...
  22. H

    Random, I mean random spikes on CPU usage

    Just changed many cameras in BI with the enabling of substreams, also attached camera setup page with substream enabled, no difference, still 100% Thanks for all advice
  23. H

    Random, I mean random spikes on CPU usage

    Excuse my ignorance, where do i enable substreams ?, Each camera on its setup server page has substreams enabled
  24. H

    Random, I mean random spikes on CPU usage

  25. H

    Random, I mean random spikes on CPU usage

    Does this help?
  26. H

    Random, I mean random spikes on CPU usage

    Hey Guys, BI 5 33 cameras mostly 6mp and 8 mp On my high end rigs , top of line Intel cpus 19 10980 types never get above 30% cpu usage On a older circa 2014 intel i7 5960x with ssd hd and 32 gb , same amount of cameras I can be hovering one day, all day at around 40-60% utilization Then...
  27. H

    Can't rearrange cameras

    Thank you, worked like a charm !
  28. H

    Can't rearrange cameras

    Hey guys, Latest version of BI 5 Just noticed ( have not done it in awhile) I cannot drag one of my 30 cameras to another location on the grid whereas in the past I was always able to drag a camera to another location Any help appreciated jeff
  29. H

    Strange icon on Dahua IP camera server page

    Does cat 6/ 7 have better numbers for AWG?
  30. H

    Strange icon on Dahua IP camera server page

    Thank you for the info! I guess I don't understand why a spec with 350mA or 600mA can trump 2A with a 12v transformer especially over a 100 foot run. I guess Voltage is key here not amperages, forgot electricity 101 or PIE
Top Bottom