Search results

  1. M

    Help finding a wall bracket for a Dahua bullet IPC-B5442T-ASE to see around a corner

    HI all. Have a look at my dodgy drawing. I've installed a bunch of cams with no issues. This one needs to be mounted on a side wall, but "see" around the corner. I have a matching mounting baseplate PFA130-E, however it will bring the base of the cam (circular plate) off the wall by only...
  2. M

    IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware General_IPC-HX5XXX-Volt_MultiLang_NP_Stream3_V2.800.15OG004.0.R.201203

    I keep getting stuck on "Rebooting, please wait" when trying to update firmware. I'm logging directly into camera (t5241h-as-pv) IP, via the blue "explorer icon" on the NVR, and go to "upgrade". Keeps getting stuck at reboot stage. Ideas? Cheers, Mat
  3. M

    IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.20.R.200903

    Sorry Andy I don't understand? I am still getting stuck on the "rebooting, please wait", with a completed orange taskbar. Nothing happens after that. Does this mean the update is finished, even though it's saying "please wait"? And thanks Panda, but my setup uses 192.168.50.....numbers. I...
  4. M

    IPC-T5442T-ZE IPC-T5442TM-AS latest new firmware IPC-HX5XXX-Volt_MultiLang_PN_Stream3_V2.800.0000000.20.R.200903

    Hi guys/Andy, Just trying to update this firmware onto my IPC-t5241h-as-pv Can I please check I'm doing it correctly: I went to link I downloaded the .BIN file I logged into my cam directly (using the blue web symbol for that cam via the main NVR web interface) I put in the BIN file under "file...
  5. M

    Want to start afresh. Ideal setup to watch Clips from Dahua NVR?

    no-one?
  6. M

    Want to start afresh. Ideal setup to watch Clips from Dahua NVR?

    Hi again all. To start, here’s my setup: NVR - Dahua DHI-NVR5216-16p-4ks2e (2x4TB drives) Cams - I have a range of recent Dahua cam’s: ipc-t5241h-as-pv, 2x ipc-t5442tm-as, etc......(6 in total) The house (including cams) is wired with CAT6. All cam’s connected directly to NVR, then NVR...
  7. M

    Where did my Dahua NVR GUI access go?

    Ah yeah. It’s all coming back. Again a little help! - I take it the “ANR” means a cam will record to an installed SD if the network is down? - what’s “M&A”? - assume I ignore all the “POS” (point of sale) stuff? - I have a house alarm but keeping it separate for now. It’s physically...
  8. M

    Where did my Dahua NVR GUI access go?

    I’ve left the cam’s as they were, and all the various settings/rules have remained. I have made sure that p2p is disabled on each of them. Out of interest, when I go to a cam, and look at “TCP/IP” under network, I notice the default gateway (which I have always assumes means the address of my...
  9. M

    Where did my Dahua NVR GUI access go?

    No worries. I’ll do that and see what happens! Bloody annoying as someone asked me if I’d seen anyone steal a bag off her bike the other day, and I don’t seem to be able to access the footage. It should have been recording, as the cam’s functions such as light coming on if tripped after hours...
  10. M

    Where did my Dahua NVR GUI access go?

    Ok update time. I ended up factory resetting the NVR. I suspect the primary issue - not being able to access the NVR at all (even though it seemed to be running) - was that my old router assigned IP’s between 192.168.1.1 and .253, whereas my NEW router uses 192.168.50.1.... So when I reset the...
  11. M

    Dahua has a new water proof junction box PFA130-E / PFA130E for Turrets ( PFA137, PFA139 )

    Thanks for asking 1st! Only if pics are not claimed as your own (perhaps a simple credit like “Example of installed product” or something. Cheers! Mat
  12. M

    Where did my Dahua NVR GUI access go?

    Roger that. The thing is that I don’t recall ever turning on the P2P. I must’ve done something silly whilst on the initial learning curve. I’ll try the suggested as soon as I get a chance (it’s a pain unplugging it all to dig out of cupboard, plug in a monitor and mouse, etc. should get a...
  13. M

    Where did my Dahua NVR GUI access go?

    I reckon it may well be time to start from scratch with a factory reset and set it up properly again. At least I know how to do the cams and their special functions now. Otherwise I fear I’m gonna keep hitting these weird snags as I go. On that note, I have read here that I should enable a...
  14. M

    Where did my Dahua NVR GUI access go?

    Ok now we’re onto something. I had ensured p2p was disabled on the setup, however it’s coming up as p2p on the iDMSS+ app..... I’ll look into it!
  15. M

    ***PSA for those with a New DAHUA NVR with Built-in PoE switch

    I notice you have a 192.168.50.1 address for you router. I've just upgraded to a new Asus NT-AX86U from an old Asus. Previously, the router allocated 192.168.1.xxx numbers, and now I get 192.168.50.xxx I have lost the ability to simply type the IP of the NVR in a browser to access its GUI...
  16. M

    Where did my Dahua NVR GUI access go?

    Yeah DHCP had been off. I had assigned 192.168.50.2 as a static address for the NVR, so I thought I'd try removing that and see what happens. Yes, I can still see the cam's via IDMSS when they're all plugged in. Weird indeed.... So what settings should I insert when I try turning off DHCP on...
  17. M

    Where did my Dahua NVR GUI access go?

    I suspect this is all to do with when I got my new router (upgraded from older Asus to new one). All my addresses changed from (more familiar) 192.168.1.xxx to 192.168.50.xxx...... Given I might also have some dodgy setups from my 1st initial setup, should I start over?
  18. M

    Where did my Dahua NVR GUI access go?

    Ok. Here’s a few screenshots. The “test” function is coming up “connection failed”.... My Asus router has a LAN address at 192.168.50.1
  19. M

    Where did my Dahua NVR GUI access go?

    192.168.50.48
  20. M

    NVR - freezing, lagging, delays

    I’ve had issues with all browsers except Explorer (the one I never use!). It’s especially a problem when a tripwire or other rule is triggered - I get a dropout and a lag time, right when you want the best pics! Explorer seems to fix it....
  21. M

    Where did my Dahua NVR GUI access go?

    Hi again all. I'm still yet to get about to undertaking a full reset as per Catcamstar's suggestions. In the meantime however, for my own learning (the curve can be rather steep!), I'm still a bit confused about the whole IP address thing. The situation: I can see that my NVR is still...
  22. M

    Where did my Dahua NVR GUI access go?

    Thanks all. I plan (when I get a chance) to install my final 2 cams, factory reset the NVR and start from scratch. I suspect alot of my issues are from learning as I go, so I suspect restarting shouldn't now be too hard.....
  23. M

    Where did my Dahua NVR GUI access go?

    Another issue! I can see my NVR on my router (192.168.50.175), but I can't log into it.....! I reckon it's time to get around to Catmaster's suggestions and start from scratch..... On that note: I have 2 more cam's to install (cat6 direct to NVR). Should I do this AFTER factory reset? Does...
  24. M

    Dahua Face Detection and IVS tripwire no event notification DMSS app

    Which NVR are you using? Does it have the capability to run these functions? I had tried to set up all this stuff until I came to learn my cam's could do it, but the NVR couldn't!
  25. M

    IVS rules won't work on my two IPC-t5442tm-as 5mp 2.8mm cameras

    I've gone back and redone all changes on the cam's only (as opposed to using the NVR GUI). So, for example, I log directly into one of the IPC-t5442tm-as cam's, turn on IVS, set a few tripwires and turn on motion detection, save, done. Thing is, when I try "search" on the NVR in order to review...
  26. M

    IVS rules won't work on my two IPC-t5442tm-as 5mp 2.8mm cameras

    Doing so on the cam (as you've suggested previously - thanks mate. Helpful). I'll try to wipe them off the NVR and see if that works. It's always so variable what works cam to cam. Really annoying!
  27. M

    IVS rules won't work on my two IPC-t5442tm-as 5mp 2.8mm cameras

    Hi gang. My next issue to sort out! First the system for reference: NVR DHI-NVR5216-16p-4ks2e All cameras directly connected via Cat6. All firmware up to date. Using the NVR's GUI via Microsoft Explorer. Altering cam settings via their direct GUI's. Have 3 other Dahua cams without the...
  28. M

    Where did my Dahua NVR GUI access go?

    Done. Thanks for that, all sorted!
  29. M

    Dahua cams/NVR dropping frame sections right at the money shot

    Yep that was the issue. Would play along fine until hitting a "triggered" section (motion/IVS/tripwire), then would blank out briefly, then play a loop around and around with same blanks each round. For people's interest, I never use Explorer (horrible), but I read this didn't happen using...
  30. M

    Dahua cams/NVR dropping frame sections right at the money shot

    yep been through all that I think. I just tried swapping to Explorer 11 (just to try the GUI with that) and it seems to have stopped the loop/stagger problem when playing back triggered footage. Good.
Top Bottom