Search results

  1. PointLookout247

    weatherproof caps (rj45 connectors)

    does anyone have any advice on using the weatherproof caps at the end of the rj45 to cam connectors? i have the weatherproof tape also but didnt know if using both or one over the other had better results.
  2. PointLookout247

    How to get push notifications through firewall - working finally

    ok, gonna change the router log to allow all messages as its on error only. then check back into the log. thanks for the tip.
  3. PointLookout247

    How to get push notifications through firewall - working finally

    dude, im in the exact same situtation. vpn is on, if i disable upnp, i cant get any notifications from the app or nvr email motion sent... how did you find out it was that port? I dont want to let the nvronline either, but want the push notification and the email alerts... could you post all...
  4. PointLookout247

    Lorex setup help needed

    got it resolved, it was tinycam pro settings which had to be changed to another lorex model or dahua as make... working with lorex support for the firmware as it wont update over internet.
  5. PointLookout247

    push notifications and VPN / UPNP

    i have a VPN setup on my router and currently have UPNP on. However, if i was to turn this off (security concern) how do i go about allowing motion notifications? Turning off UPNP in both the NVR and the cams also, im unsure how to setup my NVR so i still get the email notification on motion...
  6. PointLookout247

    How do you all watch Dahua cams on your tv's

    LMAO... There's a spooky character on the bottom right cam... Question... Why do you select h246 over h265? I thought the latter was better...
  7. PointLookout247

    Starlight IPC-HDW5231R-Z - junction box or mount

    so looking to buy 2 of the starlight ipc-hdw5231r-z cams and will be installing on either soffit or pvc vinyl side. which would be better for install, a mount or junction box? could you also recommend the actual model numbers too please? thanks
  8. PointLookout247

    REolink RLC-411 or ???

    No shit. Just read the amazon comments...the NVR's a serious fire hazard and they're marketing dept is 100% better than there product. I returned one right away once i found they lied and added a crap hdd instead of surveillance and then support said to plug the NVR in a diff way to not get the...
  9. PointLookout247

    Settings for Lorex LNB8005 Cameras

    Im looking for someone who has this camera, LNB8005 and has achieved some good settings. I found that when you direct connect the cam to the pc and login it has more settings than NVR. Its overwhelming actually. One thing i noticed is that whenever i put the camera onto motion only and save...
  10. PointLookout247

    Multiple Cams, IPs and direct connect

    thanks. i found the issue was that the lorex options on tinycam didnt have the RSTPoption...when i changed this to a dahua it works fine. my only concern is that the settings are not correct, because im using another make other than lorex. i will contact the guy who updates the program and let...
  11. PointLookout247

    Multiple Cams, IPs and direct connect

    I have a lorex nvr (LNR6108) and multiple cams (LNB8005) setup recently. Upon install i connected the nvr and 1 cam to test. I changed a few settings (password, motion control, etc) and then got both tinycam pro and gDMSS working. The port for the camera at install was set at port1 and the...
  12. PointLookout247

    Lorex setup help needed

    to add; i also have the switch settings turned off because im not sure why thats needed. I can also view the camera from logging into browser via ip 192.168.1.xxx and i have access to the system setup. its only tinycam pro that doesnt work.
  13. PointLookout247

    Lorex setup help needed

    Hi, first post so here goes. I purchased a lorex 4k nvr w/ 6 cam system from costco and it contains; 1x NVR - LNR6100 6x CAM - LNB8005B I setup the nvr (poe) and 1 of the cams and this works great through the NVR and also thru the dDMSS LITE app. I dont need access to remote view over...
View older results
Top Bottom