Search results
-
ePoE Switch to PoE Switch - 700 feet Run
I am looking at running 700-feet of Cat 6 direct burial cable through the woods from one ePoE switch located at the office where the NVR is located and down to the second location into a PoE switch where I have (2) 4MP cameras located. I have tried 2 different sets of Ubiquiti Nanostations M5...- Captain_B
- Thread
- Replies: 24
- Forum: NVR's, DVR's & Computers
-
Pandemic threat? Anyone else concerned?
Based on this video & interview, the Vaccine the FDA approved is not even available. Watch the video to get the truth. Vaccine FDA approved not being manufactured -
EmpireTech 6 Years Anniversay, New Office New Start
Congratulations Andy and thank you for your excellent customer service, may your next 6 years be even better than the last.- Captain_B
- Post #47
- Forum: EmpireTech Andy
-
5241E-Z12E Loosing Focus from Night to Day
Just watched the recording to see what it looks like outside when it switches from night to day and at night it is focused perfectly but then when it switched to the daytime it was too dark to see anything (pitch black). I changed the time to switch from night to day when it's daylight out... -
5241E-Z12E Loosing Focus from Night to Day
I have 9 of these cameras used as spotter cams for the PTZ's and I noticed one of them about every 2 to 4 days will lose its focus when going from night to day time in the profile management schedule. In the camera, under Conditions, Focus & Zoom, I have Day set as "Semi-Auto" as well as Night... -
Curious Nighttime Stop
I'm guessing he's putting 3 recently stolen catalytic converters (wet back of his shirt from laying on the ground under the cars) into the luggage so when he gets out at home it doesn't raise any suspicion or noise.- Captain_B
- Post #15
- Forum: Camera Captures
-
Lawn mowers
I have a couple of little mowers that have cruise control, blue tooth and AC/Heat. It's not all easy, once I spilled my cocktail. -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Flintstone61 & Sebastiantombs thank you for sticking with me and opening my mind to a different avenue on troubleshooting and you were correct, the Nano needs put into a Network at the Access Point. I did a hard reset on the test camera and the default is 192.168.1.108, same as the NVR, and by... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
The Nano Access Point is connected directly to the NVR channel 15 RJ45 port. I have tried connecting the Nano Access Point to the same router the NVR is connected to but the NVR still does not see the camera. -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
I've double-checked everything and I am down to the Nano Station and Nano Access Point are working perfectly and when I log in to each of them via my router, it's beautiful, but when I connect to the NVR I get no blue "e". I'm lost as to why, maybe a big hammer hitting the NVR would help, I... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
I was able to spend some time troubleshooting the Nano Stations and so far no joy. I brought the Nano Station up here with the Nano Access Point so I can work through the issues quickly. What I found is I can use the Nano Access Point to send the Internet to the Nano Station and with my... -
Direct Viewing of Camera via Laptop
Looney2ns: That worked, thank you so much, now I'm off to test my Nano Station. Thanks again sir for all your help. -
Direct Viewing of Camera via Laptop
looney2ns: Those are the instructions I followed and still no joy, any other suggestions? -
Direct Viewing of Camera via Laptop
I am trying to do some testing of a Nano Station and in order to make sure it is working correctly I am trying to be able to access the camera's GUI directly with a laptop. I followed the directions and set the laptop's IP Address to static 192.168.1.200 as the instructions show, turn off wifi... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
I do not run BI since I am going directly into the Dahua 5216-16P-I NVR......maybe that would be a better solution than using an NVR if I can get the Nano-Station connected. The Nano was working great until I turned off the NVR for a short period but now it will not reconnect. Do I need a... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Rocky500, I tried that but still no joy. I do notice that now and then I do see a blue "e" but when I try to log into the PTZ its never brings up a log-in screen or when I go to live view I cannot connect to the PTZ and then when I go back and look at the camera list the PTZ is greyed out... -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
TonyR, How do I do that? I do know the camera's IP address through the WebGUI if that helps. -
Proper Wiring Ubiquiti NanoStation NSM5 - Help Please
Thank you Redfive, I made the adjustments a couple of weeks ago and got it up to 72Mbps with 93% AirMax quality and everything is working perfectly until today. And today I needed to turn the NVR off and after a couple of hours and then I turned it back on and the PTZ using the Nano station... -
DMSS and DMSSHD on Ipad on iphone notifications
Psycik: You need to make sure you have it scheduled on your camera as seen below: And checked in your IVS rules as seen below: -
DMSS and DMSSHD on Ipad on iphone notifications
In your DMSS app on your "Live" screen while watching your cameras live, at the top you see a home emblem, a 6-sided wheel, and an arrow with lines. Select the camera in your live view window you want to check/change and then touch the 6-sided wheel, which will take you to the setting window... -
DMSS and DMSSHD on Ipad on iphone notifications
Psycik: You are correct, it must be the settings on app for the iPhone. I have mine set up for Main Steam for both playback and live view and for "Notifications" NVR is on, Period is 00:00-23-59, and check marks on Intrusion Alarm and Tripwire., hit save, and all good. Check and see if yours... -
DMSS and DMSSHD on Ipad on iphone notifications
I just figured it out, you have to have "Snapshot" checked in your Camera's IVS rule and you have to have the "Schedule" for "Snapshot" in "Storage" for the camera all good for it to work on the iPhone. -
Strange Messages in DMSS App
Got the same messages and my push notifications quit working overnight. -
DMSS and DMSSHD on Ipad on iphone notifications
I was working on my phone this week up until Thursday and it no longer gives me notices when a tripwire or intrusion happens. I was making some adjustments on the cameras but not sure why it quit working on all of them. I did get my test camera out of the box and tested it and it works but the... -
SD6AL433XA-HNR Laser PTZ Tracking Issue
The snow flurries aren't stopping and the high winds and temps in the '20s have me calling it off for this evening, hopefully, tomorrow for more testing at night. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Wittaj: Stopped all snapshots in all cameras, reformatted the hard drives, it looks like that fixed it, see video below. Thank you for all your help sir. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
Path C on the Snapshots is my laptop and I can't find where to stop this, any help would be appreciated. -
SD6AL433XA-HNR Laser PTZ Tracking Issue
No problem reformatting the HDD's, they are 10TB Western Digital Purple Drives. I think I may have the wrong setting for the HDD's, any suggestions? -
SD6AL433XA-HNR Laser PTZ Tracking Issue
I made sure Smart PSS is not running on any computer, nor is the DMSS program running on any phone and no computer connected to the NVR. I do get this annoying issue with LiveSnapshots even though all my cameras have snapshot unchecked. -