Search results

  1. S

    connecting remotely through double nat

    Thought I had this resolved by having the client switch to a business account with a static IP, but hughesnet is telling him that he will have to buy a new dish and modem for ~$600 and they will not refund him for his week old set up- so that is now out of the question. It appears I'm going to...
  2. S

    connecting remotely through a double NAT

    Hughesnet controls them. Basically from what I see on their q&a is port forwarding doesn't work period. I did find out tho that contrary to what is posted on the website that they do now offer a static IP with their business service, so they are going to switch over to that. That's why I...
  3. S

    connecting remotely through a double NAT

    delete
  4. S

    blue iris isn't helping me

    a few other things to try if needed- first is try changing to a different monitor / screen resolution, if you are currently 1920x1080 try going 1280 x 720. also under your advanced screen settings then Monitor try changing your refresh rate, you may have to uncheck "hide modes that cannot be...
  5. S

    Quick PoE switch questions

    you should be good with the netgear, plenty of power on the PoE ports, some mgmt ability and no fans so it will be quiet
  6. S

    SD Recording question

    it's all in your camera setup, how well you have motion detection set up, how often it triggers, etc. 64GB will be plenty! just make sure the camera can support an SD card that large. I ran 8GB cards in the cameras at my old house, they were cheap to replace and usually held a week or more...
  7. S

    Quick PoE switch questions

    as mentioned already, if you can get away with that zyxel then I would probably go that route, that is a nice unit and its also gigabit. I posted regarding PoE injection simply due to the catch-all subject line of this thread ;). not everyone needs more than 2/3/4/5/6 ports of PoE to justify...
  8. S

    Quick PoE switch questions

    I can answer both actually... if those were my only two choices I would take my chances with the Kia, I will not own another Benz outside of warranty, our prior '14 ML was one of the biggest pos's I have ever had. i will have been in IT for 16 years as of June 8, I'm currently a systems...
  9. S

    Quick PoE switch questions

    I've actually founded it easier to use an 8 port inline PoE injector. you can find these on ebay for about $30, it gives you the ability to run it with any switch you want at whatever speed the switch is and you are not limited to a few year old used business take out switch. you can do two of...
  10. S

    Quick PoE switch questions

    SFP is for fiber connections, you should have zero need for that.
  11. S

    Camera positions on my home

    that's a tough one as it looks like it would be a struggle to wire, short of running wires down the side of the house which would look tacky, you are going to be likely pulling baseboards and fishing cable through the walls. the height of the cameras now give a decent general overview of the...
  12. S

    High CPU Useage on 22 Camera build system

    This particular one is a HP SB800 G2 mini tower otherwise known as a prodesk 800 g2. It's been a while since I have been on that side of the IT dept, but can say that I saw similar setups in the elitedesk sf800g1's and g2 ultra small case machines, as well as the older Lenovo E series. a bit...
  13. S

    High CPU Useage on 22 Camera build system

    bumped to 8GB RAM, processor dropped to 33-36% and is no longer beating the crap out of the page file, system memory is holding steady at 76% consumed. out of curiosity I went back into the bios and dropped the allocated video memory down to the default 32MB it shipped to me with, booted it...
  14. S

    High CPU Useage on 22 Camera build system

    Memory is ordered, will be here tomorrow. The tool does work if you uninstall the current provided HP driver before running the tool, if you attempt to run it with the HP driver installed it will throw a msg saying to check with the computer vendor for their latest driver. Windows was...
  15. S

    High CPU Useage on 22 Camera build system

    just wanted to add my experience here in hopes that it may help someone else experiencing this issue, I have a 16 camera system consisting of primarily 2-4MP hikvisions and 3 d1 cameras feeding in through an Axis box. all are set to 15fps, 4096 bit rate, motion detection and direct to disk...
  16. S

    Hik 4mp's- no video in BI at full resolution

    rtsp time codes didn't change it. camera maxes out at 16MB buffer, set that and set BI to 20- No signal
  17. S

    Hik 4mp's- no video in BI at full resolution

    yah, see the screenshot below- vlc shows the 4mp feed fine and BI has the vertical lines in it. let me try the time codes
  18. S

    Hik 4mp's- no video in BI at full resolution

    I did, all of the setting i mentioned were toggled at different points for testing purposes. I dont actively run 264+ on any of the systems
  19. S

    Hik 4mp's- no video in BI at full resolution

    I have 3 US version/ red box DS-2CD2342wd 4MP cameras on a new HP i5 BI setup. if I try to run the cameras full resolution I get a "no signal" window for each of them. The cameras are on their own local wired subnet feeding through a 5 port PoE switch, nothing else is attached. LAN/WAN access...
  20. S

    add external BI server feed to local BI display

    ah, never checked the help file, just google and searching here. Thanks!! playing around with it some more i got it to pull a feed using the "raw" setting. i have fiber and cable with great upload speeds at all locations except one which is DSL, that is the one i am working with currently. i...
  21. S

    add external BI server feed to local BI display

    I have several sites that i would like to pull a camera feed or two or three, so when i am at the office i can see everything i need to on my main BI server there rather than having to pull up multiple web pages on the pc for the remote sites. I have tried adding a "generic" mjpeg camera...
  22. S

    Blue Iris Tools - Weather Overlay, Watchdog & more!

    anyone tried to/figured out how to get a weather radar image to appear as well?
  23. S

    all mp cameras dropped their detection zone settings

    Kind of an odd one here.. suddenly seeing 600+ alerts a day on my camera list vs 20-30 prior. got to poking around and noticed that of 10 cameras, 6 had dropped their detection zone settings (all of my MP cameras), so rather than areas being masked off the entire camera zone was set to detect...
  24. S

    BLUE IRIS controlled on two computers

    ah crap, i just licensed my second one too not realizing there was discounted pricing. You can technically run the key on 2 machines you just cant update the software, that's when it starts the eval mode thing. i ran into this a few times during the testing phase of the second one.
  25. S

    disable remote viewer access log files

    perfect! thanks!
  26. S

    disable remote viewer access log files

    I've been asked by one of my customers to disable phone logging if possible, it sounds like it is causing issues between two supervisors :cool:. this would be the part on the phone app under Log > Devices view that shows each phone that has logged in, number of times, and last date and time...
  27. S

    Noobie Question about system

    We'll just say it is a popular, cost effective option if you are running non-proprietary ip cameras
  28. S

    video injection into Dish

    Looking to take the hdmi out from my Blue Iris PC and distribute throughout the house. the catch is i have Dish network vs cable, 3 of those are wireless joeys. Anyone know of a way to do this?
  29. S

    Blue Iris Tools - Weather Overlay, Watchdog & more!

    Removed bi tools, upgraded to win10, updated some network drivers and reinstalled bi tools. Besides some typical win10 bs and rdp no longer working from my Mac all is well and functioning again. Going to try another system today..
  30. S

    BIT xml errors updating weather

    So the same thing happened to another bi system i have.. since it was my primary i went ahead and removed the tools software, upgraded to win10 and reinstalled tools, all good now! Im going to the new house this morning to finally figure out why i have lost all communications with the house for...
Top