Search results

Could you please explain how to do it in a more descriptive way? We have many broken Hikvision devices. at least we'll have a chance to use their ID numbers.

unfortunately. ID and Mac address cannot be written to haikon devices via putty.

Hello. Is there a firmware update file for this camera? I couldn't find it anywhere I searched. camera is broken. To fix it, I need to send firmware to the camera via tftp. https://www.dahuasecurity.com/mena/products/All-Products/Network-Cameras/Entry-Series/2MP/IPC-HFW1230S-S5

Thanks for the reply. it's like no matter how many times I change the password, someone learns the password somehow. I hear rumors that employees can monitor employees in other departments. device dahua nvr5232-4ks2. The thing I'm wondering is: Does DMSS or dahua provide a service that...

Is there any way I can find out how many people are watching my device? Even if I change the password, it is as if there is someone in my business who is aware of what is going on. Is there a way I can see how many people are watching my device to make sure of this?

unfortunately this didn't work. Is there anyone have an idea ?

NVR2116-4KS2

Hello I am facing a strange problem. my recorder is Dahua NVR2116 My device's recording settings are set to continuous recording. but when I go to the recording watch, it shows every 1 hour of recording in 5 seconds. The device quickly plays back a 1-hour recording in 5 seconds. this...

I reply years later. but i need the same thing. Can I change the serial numbers of Hikvision devices via putty?

these methods do not work. The e-mail address entered on the device cannot be accessed, so I have no chance to do this method. :/ Installing firmware via tftp with serial connection. however, the user information remains the same. Because NVR is 4.0. This method would work if I could...

Does anyone have an idea for a solution?

No. The device does not have a removable battery

Hello everyone: I have Dahua NVR4216-16P-4KS2. The password for this device has been forgotten. The e-mail address saved on the device is no longer accessible. NVR 4.0 firmware is installed on the device. I tried to downgrade this software to v3. but it does not allow it. When I upgrade other...

actually i have a programmer for this. but I cannot find the "flash firmware" of the device anywhere.

Does anyone have an idea?

Hello I have an EZ-IP NVR1B04HS-4P-L Dahua based device. While flashing software on this device, the device crashed. Now when I energize the device, the answer I got from putty is this BOOTSFAIL i guess u-boot crashed. and it won't boot. is there any way for me to reinstall the bootloader?

it is a pity that no one has an idea about this :(

Well, the commands that come after the device is turned on are as follows I guess the command you said here is "getHardInfo" but when I write it I get the following answer : getHardInfo cmd_exec: exec getHardInfo error. Support Commands: GetAnrCfgInfo GetAnrProcess...

The response to the help command is as follows. Which command do you think might be in it? HKVS # help ? - alias for 'help' arc_go - start application at address 'addr' base - print or set address offset bdinfo - print Board Info structure boot - boot default, i.e., run 'bootcmd'...

Hello. I have several "Ezviz Husky Air" wifi cameras in my hand. The verification code of these cameras is written on the label on the product box. But these labels were torn off by the customers. Is there any way I can find the verification codes? (the cameras does not have a web interface...

I guess the only problem is it is not hwid .. The camera will be garbage until I find the proper hwid .. what a pity .. you are a perfect man thanks for your help

I did these now I am getting this answer. I cannot ping the camera. While trying to connect to tftp at boot, it pings for 1 second. no ping after power on System startup U-Boot 2010.06-svn3105 (Mar 11 2017 - 10:27:44) DRAM: 64 MiB gBootLogPtr:80b80008. Check Flash Memory Controller v100...

I updated it with a different update file now. this is the result. the camera does not receive ip. I can't reach camera web interface System startup U-Boot 2010.06-svn3105 (Mar 11 2017 - 10:27:44) DRAM: 64 MiB gBootLogPtr:80b80008. Check Flash Memory Controller v100 ... Found SPI Nor(cs 0)...

partition file version 2 rootfstype squashfs root /dev/mtdblock6 fail to parse HWID fail to parse bootargsParameters.text info get bootargs info failed cmdLine mem=47M console=ttyS0,115200 root=/dev/mtdblock6 rootfstype=squashfs crashflasg:1, logmagic:54410011. The"partition-x.cramfs.img" in...

actually I haven't done much. I copied all the files you provided to the "dahua tft server / root" folder. I updated it again. There were missing firmware files you threw. I guess this is due to the incompatibility of the firmware of the camera. I moved the missing file from my other firmware...

I think we got the partition files taken care of. does not bootloop anymore. but I can't run the "run up" command. because I can't find the "update.img" file. Where can I find this file? System startup U-Boot 2010.06-svn3105 (Mar 11 2017 - 10:27:44) DRAM: 64 MiB gBootLogPtr:80b80008...

how do i do this?? How can I access the partition.txt file? and how can I add it to the botloader? yep I'm sure I'm using the right software I have not done this before. Can you help me on how I can do this? I'm sorry .. I'm taking your time. but thanks to you I am learning a lot. I hope...

I get the following responses to the "partition" command fail to load partition.txt fail to load partition file partition isn't exist

Here are putty's answers to me =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.03.31 16:35:28 =~=~=~=~=~=~=~=~=~=~=~= s partition fail to load partition.txt fail to load partition file partition isn't exist > printenv bootargs=mem=47M console=ttyS0,115200 root=/dev/mtdblock7 rootfstype=squashfs...

I can't stop whatever key I press. rx tx connections are correct. I can understand this as it gives the command "abort" because I pressed the CTRL+C key when it entered the load loop. but always trying to download from tftp. I have to stop this loop to be able to enter commands to this. Do you...