Search results

Sorry if I was not descriptive. I record all video 24/7 over RTSP to a custom NVR on a segmented LAN. The network should always be going.

No - during initial setup the camera was a royal pain to provision. I suspect now this was due to network. I've provisioned about a dozen of these cameras from LTS (Hikvision), so I knew something was wrong. After wrestling with it for a few hours, I finally got it up and running. I suspect I...

Has anyone tried using the modded firmware with an LTS CMIP3362W-M? Any pointers as to how I can resolve the constant reboot? It's probably several times per day for me.

Does anyone else have stability issues using firmware 5.3.6? Some cameras will "drop" out for a second every few minutes. I mentioned a similar issue here https://www.ipcamtalk.com/showthread.php/7604-Variable-Bitrate-Causing-a-Crash This is different from the above thread. They continue to...

Problem seems to have corrected after reverting to 5.3.2. Any ideas?

It's just one camera, which is what I'm worried about. I bought from milkisbad, so I have no concerns about the warranty. My only concern is the hassle of uninstalling / reinstalling / shipping.

Well, I left it running overnight with constant bitrate, not variable. It locked up again.

I have reinstalled the firmware. And H264+ is not an option (I only see H264).

Hello, I am using: 2x CMIP9142W (LTS 4MP bullet) 3x CMIP3042W-28 (LTS 4MP turret) All cameras have worked fine using firmware 5.3.2 I recently upgraded the firmware to V5.3.6 build 151204, and now one of the 4MP bullet cams left me the following for a few hours: Has anyone seen this...

Exposure is 1/30 Gain 60 Backlight = BLC right WDR = off Noise reduction = 50 Framerate = 15fps Bitrate = 16384 constant I-Frame = 15

The motion is a tad blurry/smearing. I have blueiris set to save JPEGs every second after an event. Sometimes the JPEGs are blurry too. Any thoughts? Not sure if due to: - I-frame - Frame interval - WDR being too high - Backlight settings (BLC seems to be better than WDR for bluriness) It's...

Hello! I have purchase some HIKs from MilkisBad - a few 4MP turrets and a few 4MP EXIR bullets. Could someone please help me with my image settings? I've tried to adjust as best as I can, but would appreciate your input. Thanks

Turrets are fine. Price can be over $100, maybe up to $130. Just not $200+ per camera. Was only giving an estimate, not a hard dollar figure. Thanks for your time.

I've decided to upgrade my old and crummy NTSC analog cams with some IP cams, and would appreciate some assistance selecting a model. My proposed setup: - 5x domes - outdoor - good price / performance - ideally $100 / cam or less - POE required (will be powered and connected to rack...

@milkisbad could you PM me a catalog? Looking to pickup a couple 4mp cams.