Search results

I've tried it as you suggested but with few hpes, the NVR doesn't support onvif, so this program can't connect to it and guess the rtsp url. I've an error 400 as reply, Bad request. Herospeed isn't at all a good brand, but I hope somebody may know the url, if there is one, probably yes because...

Thank you for your kind answer, sure I put two of them, I've tried all combinations possible with no results, I've added also admin:password@IPnvr:554 cause sometime it asked for it (I'm using for test VLC), I have a NVR_HI3536X64_H265_64CH_V9.1.13.5, no more ideas? Thanks

Unfortunately no one of the suggested URL works with a Herospeed 64 NVR :(

After searching and asking I may tell you a compatible connector is ZFP111041NN or LPJ164381DNL, I'm trying to buy to test, I'll report here

Hi mates, I've a Vivotek camera with the transformer broken, I know it because I can measure pairs on RJ34 and the RX one is open. the RJ45 module has name RT7‑103A4V1A, it's pinout is 5+5 pin, I can't find it searching, there are dozens else looking compatible, I'm sure Ithere is something...

HI! Before deciding if it's worth to try repair I would love to hear your opinions, thanks! The camera powers on with PoE and 12V, the internal LED goes on, it reacts properly to the bright/dark condition, pressing the reset reacts too, keep pressing it looks to reset configuration (the...

Hi, the version DH_SmartPSS_International_Win32_IS_V2.02.1.R.180619 can support up to 1024ch, the problem is that it's just a 32 bit so the decode is not the best. iTuneDVR may help you with more recent version

thanks! So if I got it right, to overcome the limit we can: 1) open different virtual machines and install for each one SmartPSS 2) Install SmartPSS different times using kind of different names, and run them simultaniusly 3) Export the config and import another one, to see other devices. In my...

Thank you mates for all replies, I would you know that my goal is not to see 500 channels at once on one big screen, but the ability to see every single place, separately, for example 16 channels. The limitation od SmartPSS is that when it connects to XVRs, exceeeding the 256 result on XVR...

Thanks for posting, DSS Pro cost a lot of money, especially for more than 256ch, I'm sorry to say that Dahua makes this choice without thinking on average users. my client has already spent lot of money for different systems and it's in his rights to see them in his PC, whouth need to pay more...

Thanks for reply, have I undestood well? Video Wall works only with streams coming from NVD0105DH-4K?

Hi! Has anybody known if there is a way to overcome it? Maybe pay extra? But Seams Dahua doesn't support/sell more SmartPSS. Prices for DSS are unbelievable high, make it no sense. A client who bough 1000 cameras from Dahua has spent enough money, and has fully the right to see them on his...

Anyone here have tested sucessfully the Video wall? Thanks

Hi, thanks for replying, I have Windows 10 64 bit, all prerequisite are satisfied. The program is full worjing except for video wall. In the main guide there are cameras visible in the menu, ready to be placed into the video wall, as you can see from my picture I have no choice. Do you have the...

Hi, I've also tried older versions and on different servers, there is nothoing to do to add cameras on Video Wall setup, it displays Default Group and it's not populated by cameras. Do you have the same problem? Does Dahua disabled such functionality? Thanks for answers

you may try to open it by rtsp rtsp:/login: password@ip:554/cam/realmonitor?channel=0&subtype=0

Hi, I've just tried it and it works, I've used rtsp:/login: password@ip:554/cam/realmonitor?channel=0&subtype=0 You need to enable channel 0, in the new XVR is under display settings, no idea for others, be sure this feature exist

Hikvision said that my cameras (DS-T203 and DS-T201) don't supoort OSD :facepalm: simply amazing, recent cameras 2mpx without this option, this is another reason for me to keep not buying Hikvision for my clients (Dahua doesn't have such problems)

Help, thank you

Thank you, I've searched a couple of hours to figure out myself and quickly solve the problem. I couldn't find a solution. Everybody talking about this preset95.. but I've also adviced that there are raeally a lot of protocols available on DVR. By default was UTC, fixed speed, which doesn't...

Calling preset 94 went to a lack of video, and a reset of camera. I feel this presets may be dangerous! If I'll loose a camera I?m now 1000km away..

Thank you for your reply, can you please explain me better? I've clicked on preset 95, doble click, selected and press all buttons, on both DVRs, nothing is happened. What exact sequence of clicks I have to do? Thank you!

Hi, I need to configure the 2mpx TVI cameras, exposure and so on, I hnow the camera has thei menu because i can see it for a whle after the boot, but I can't find any key on the web interface menu to open it up. On Dahua rcorders is almost easy, just press the Iris button will access it and...

thank you! I've wrote a guide how I've solved the problem, here: https://ipcamtalk.com/threads/hikvision-clearing-passwords-and-or-loading-firmware-via-ttl-serial.28049/post-556441

Hi, glad to tell everyone here that I suceed. Honestly things were far from expected and I've lost lot of time, so here is the report of my experience I REALLY HOPE I CAN SAVE SOMEONE ELSE TIME, as I hoped to find a post like this to proceed without loosing that much.. My method is valid for...

I've solved it, it was need to press ctrl+u and NOT ctrl+q as written when you power it on :facepalm: Hikvision has really several mistakes all around. For more info read here: https://ipcamtalk.com/threads/hikvision-clearing-passwords-and-or-loading-firmware-via-ttl-serial.28049/post-556441

I?ve managed to interrupt boot with ctrl+u but it's not responsive to any command: U-Boot 2010.06-svn (Jun 09 2017 - 17:35:53)[V1.4.5] Hit ctrl+u to stop autoboot: 0 HKVS $ printenv HKVS $ setenv ipaddr 192.168.1.200 HKVS $ setenv serverip 192.168.1.232 HKVS $ help HKVS $ root HKVS $ su HKVS...

U-Boot 2010.06-svn (Jun 09 2017 - 17:35:53)[V1.4.5] Hit ctrl+u to stop autoboot: 0 HKVS $ printenv HKVS $ setenv ipaddr 192.168.1.200 HKVS $ setenv serverip 192.168.1.232 HKVS $ help HKVS $ root HKVS $ su HKVS $ update HKVS $ seems nothing is working here, I sniffed ethernet and nothing is...

thanks for help, yes it does, in the end of full boot i can type help and I've the list of commands. All is ok. I've managed to interrupt boot with ctrl+u, but I've a HKVS $ and anything I type is not considered (i see echo, but the command is ignored). What to do now?

Hi mates, I?ve a trouble here and can't figure out how to overcome it. ALl connections are fine, I've echo from DVR if I leave it complete the kernel boot, but it doesn't interrupt boot loader. I've tried putty and Realterm to be sure it sends really a ctrl+q.. the the stop autoboot: goes for...