Search results

I recently updated to version 5.8.3.3. Since updating, I no longer get "clips". All of the recordings are between 4 and 8 hours. I checked the "recording" tab of BI and see that all my cameras now have a "Combine or cut video each: 8 hrs, 0 mins 4gb". I haven't change this, but suspect this is...

I always knew that Wifi wasn't the best route - most of my cameras are wired ip cameras, but some just can't be wired easily. Thanks for the detailed explanation. bert

Thanks - I should have - I just did. Bert

Wyze removed the RTSP firmware and I don't think it works with the v3 cameras, which is what I have. I have enough issues with Wyze cameras, and just would like to eliminate wyze if I can! bert

I thought of that, but I have about 5 of these cameras, and it would be a lot simpler just to do wifi cameras. bert

Thanks for the suggestions - I should have stated that I was looking for 2k cameras (not 2mp). THose cameras look good, but I want something a bit higher resolution. bert

I have a few locations I currently have Wyze cameras. The Wyze cameras haven't been very reliable plus, I can't view them in Blue Iris, and would like to. I have HikVision wired cameras now, but have some locations where I can't easily run cable to and am looking for a wifi camera that has the...

This is happening on all of my cameras - the network is hard-wired fiber, and I rarely lose connection. Nothing, as far as I know, is set to reboot. bert

I have a dedicated computer to BI that never goes into sleep or hibernation mode. I have trigger audio set up for my 6 cameras (using morse code to tell them apart). The audio works for about a half day and then stops. The cameras continue to trigger and record video, but no audio is heard after...

Not sure what you're telling me. I do have each camera assigned to a group (indoor vs outdoor). bert

I never noticed that option before - I'm guessing it's a new option as I didn't have any issues with the September, 2022 version I was running, but upgrading to a newer version must have automatically enabled that with no cameras selected. Thanks! bert

That was it! Somehow, with the new version of BI, the "limit to camera groups" was checked on my existing user id. All is well - thanks!

If that was the case, I wouldn't think it would work with the older version of BI. Here's the user properties for the user logging into UI3: bert

With version 5.6.1.3 installed, the UI3 "about" menu indicates the same version. When I update to the latest stable version (5.6.6.1), I can't check the UI3 version in the browser, but in the "C:\Program Files\Blue Iris 5\www\ui3" folder, the 2 latest files are ui3.js and ui3.css, dated 11/29/22...

Any suggestions?

I'm running v 5.6.1.3 of BI from Sept, 2022. If I upgrade to any newer version, I can no longer access my cameras from the web server. I've tried several versions. THe error message is attached.

Thanks! I hadn't seen that option - I set it to a 5-second update and it resolved the issue. I usually only remote-in to change BI settings on a camera, and don't need to see up-to-date video.

Whether or not using substreams will reduce CPU usage is arbitrary - the issue remains that CPU usage increases dramatically ONLY when RDP is used. CPU usage is acceptable without RDP (~30%). There is some kind of issue with the BI app and RDP. I've seen this on 2 different computers now. As...

I've done everything in the Wiki except the "substreams" - frankly, I didn't understand what needed to be done - and I can easily live with 11% CPU usage. But having said that, it doesn't explain why the BI application (not the BI service) is causing an issue ONLY when RD is thrown into the mix.

I have a new i7-Gen 10/16gb computer with on-board Intel video. There's NOTHING else loaded on this computer - not even anti-virus, other than what comes with Windows. I'm running BI as a service, but occasionally need to load the BI app/UI. I've optimized BI as much as I can, and CPU usage is...

After WEEKS of dealing with an incompetent support person, I did finally get a resolution. In the BI app, open settings and select Users and then select the user you log in with in UI3.htm. Click EDIT and then check the "Profile/schedule changes" box.

Lately, I'm getting a dialog titled "Upgrade Session" with the text "This feature requires a user account with more permissions." whenever I try to change profile using the UI3,HTM in a browser. When I click on any profile number I get this: It doesn't matter what account I log in with (all...

After the July 3, 2020 update, the website (ui3.htm) could no longer play alert videos. I down-graded to the previous version (from May, 2020 - 5.2.7.12), and all is well again.

Thanks for that link - with the info in that article, and the help here on the forum, I was able to get CPU utilization down to about 50%. The Video Decode graph is active, so I guess it is working.

Originally, I set hardware acceleration on in the "settings" - not on each camera. I have now set it on for each camera, but still not seeing any difference. The computer BI is installed on does has video on the motherboard.

I did change the frame rates - most cameras had a Max frame rate of 33fps - I changed them all to 15 fps or lower. That brought the CPU utilization way down. It's running around 50% now - I never saw that low of a CPU utilization since I started using BI 3 or 4 years ago! Thanks to all.

I am not using "direct to disk". Hardware acceleration was off - I turned it on (Intel) and rebooted. Not much difference though - still mostly at 100% CPU utilization.

attached

attached are the files I "think" you're looking for (wasn't sure about the last two you indicated). Nothing has changed in the past year or so, except for Windows and BI updates.

Not sure when it started, but I'm noticing that Blue Iris is now using 100% CPU all of the time. I have the latest version of BI (5.2.1.1), along with the latest Windows updates. I have 12 Hikvision cameras displaying. It always used to stay at about 70%. The computer I'm using for BI is...