Search results

  1. bob2701

    Incorrect Sunrise and Sunset

    I went into all three systems to look at the schedule tab. All were set as default and while mine was populated with the correct longitude and latitude the other 2 were way out of wack but the same. Both set to Kansas. All 3 are in NJ within 8-10 miles apart. Tomorrow I'll find the correct...
  2. bob2701

    Incorrect Sunrise and Sunset

    I have not made any changes to the schedule tab in any of the systems, they are all default, not using the schedule. I don't notice any problems with any on the systems it just seems weird that they are different. That still does not explain why the times stay the same every day, normally there...
  3. bob2701

    Incorrect Sunrise and Sunset

    Hi, I take care of Blue Iris systems at 2 of my daughters homes. Both systems are in the Eastern time zone but show Sunrise at 8:50am and Sunset at 6:09pm in the log file. Every day the times are the same, no gain or decrease in time. Both systems have correct time zones set in both the router...
  4. bob2701

    Amcrest cameras and Blue Iris

    @TonyR How about this one? https://a.co/d/g6LWRIv
  5. bob2701

    Review: EZVIZ DB1C

    What firmware is it using? I had the same problem with 211011 and dropped back to 201106 and solved the problem. But then a few months later it died altogether and I had to replace it. Now running 220802 and no problems. Good luck.
  6. bob2701

    Repair db error, exclusive rights...

    Good point, I really didn’t look other than when I ran it manually. But I just checked now and it is fine either way. Edit. The more I think about it it must have been from the 2am run it makes each night. I only run it manually when I see a problem.
  7. bob2701

    Repair db error, exclusive rights...

    Just an update. Seems that the delete and regenerate worked. Log is clean now.
  8. bob2701

    Repair db error, exclusive rights...

    I did a couple of things and now it seems ok but I will keep an eye on it. #1 I had something hinky going on with a drive I used for “over 14 days”. It was showing a fairly large chunk as other files and as a result it also showed over allocation. There were no other files on the drive except...
  9. bob2701

    Repair db error, exclusive rights...

    Has been working fine for 6 plus years. Malwarebytes and Defender running and yes it is running as a service. Manual db maintenance. This just started recently but I’m not sure when. I just replaced a EZVIZ doorbell recently, maybe I’ll remove it and run the db maint again. Will have to wait...
  10. bob2701

    Repair db error, exclusive rights...

    Anyone have an idea what causes this error?
  11. bob2701

    Thank you Vets!

    @SJGUSMC21 I remember about 10 years ago I was asked to take part in a Veterans ceremony at my Grandsons school, he was about 8 and it was a surprise for him. As I'm up on stage with other vets he walks in with his class and when he sees me he waves and says "Hi Papa". Just like he expected me...
  12. bob2701

    Thank you Vets!

  13. bob2701

    Best Video editor software?

    I don't do much editing but when I do I use an old version of Movavi Video Editor, (14.5.0). It is not free but my old version still works for me.
  14. bob2701

    Review: EZVIZ DB1C

    But you can never find these prices when you need one. Bought one 3 weeks ago for $80. :(
  15. bob2701

    Huisun style bullet camera

    Has anyone found a current vendor for the Huisun style camera? I know Jennov has one on Amazon but it has issues, zoom level is not saved in presets and all 4 IR lamps are on all the time providing a horrible picture at zoom level 1.
  16. bob2701

    Blue Iris UI3

    Yes that defiantly helped. I didn't realize that changing one changed them all, threw me for a moment.
  17. bob2701

    Blue Iris UI3

    Thanks, I’ll play around with it tomorrow afternoon.
  18. bob2701

    Blue Iris UI3

    I recently noticed high cpu usage when using Chrome/UI3. Can anyone point me to what to look for? Attached are 2 images that show when using UI3 vs not using it.
  19. bob2701

    PTZ preset labels not saving.

    5.5.5.10 fixed the problem.
  20. bob2701

    PTZ preset labels not saving.

    No place to label the presets in the camera. If I label them in the PTZ settings for camera under the “Edit presets “ it won’t remember the settings. Can’t find anywhere to save. First time into the setting of the mobile app they are there but next time just the numbers. This has changed in one...
  21. bob2701

    PTZ preset labels not saving.

    As I said before, not sure what changed but I have never set them in the camera, always in the app. Has been working fine for a couple of years. I’ll look into naming them in the camera.
  22. bob2701

    PTZ preset labels not saving.

    I'm not sure when this started but my preset labels on my PTZ camera are now just numbers. If I change them to indicate what they are they seem ok but the next time I use the app they are back to numbers. I don't see any way to save them and they always worked in the past. Anyone have any ideas?
  23. bob2701

    Review: EZVIZ DB1C

    So did mine.
  24. bob2701

    Review: EZVIZ DB1C

    I reverted back to 201106 over a month ago and not a single drop out in BI. Of course the app tells me it is offline. :banghead: I need to find some time to reset it again and see what's going on. At least it is rock solid in BI.
  25. bob2701

    Review: EZVIZ DB1C

    Apparently the Ezviz app does not like it when you go back to an older release. I had to use the Batch program to default the doorbell before it would work at all with the app. It kept going up to 90% of the setup and then quitting saying there was a problem but without specifics. Finally got it...
  26. bob2701

    Review: EZVIZ DB1C

    @David L Dropped back to 201106 and for the last 30 minutes no drop outs. I need to redo the Ezviz app but I'll wait to tomorrow to to make sure all is well on the BI side. Thanks for the help, Bob
  27. bob2701

    Review: EZVIZ DB1C

    I may end up going back to an earlier firmware like @David L suggests. Spent about 45 minutes today watching 2 screens, one with BI and the other running the Batch program in view mode watching the Doorbell. Every 10 minutes (or so) it would drop out of BI but stay running in the Batch program...
  28. bob2701

    Review: EZVIZ DB1C

    I'm going to wait a bit and see if the problem gets their attention and a fix, if not I'll take your advice. Thanks..
  29. bob2701

    Review: EZVIZ DB1C

    No problem with the bell or any operation, just randomly BI loses the signal for 30 seconds. I watched it a bit the other day and in a 5 minute interval it dropped 3 times then no drops for the next 15 minutes. Only since the new upload.
  30. bob2701

    Review: EZVIZ DB1C

    I have not been on for a while now but I have to say that since the last update to 5.3.0 / 211011 on my DB1C the signal drops to BI and 30 seconds later reconnects. As of now I don't know the frequency of the drop outs but they are quite often.
Top