Search results

Hi all, Wondering if anyone has any insights here? I've been using OpenVPN and the Blue Iris app on iphone for several years without issue. All of a sudden it stopped working this weekend, including on my wife's phone. Our usual process is connect to OpenVPN (which is configured on the home...

Nice! Glad this was helpful. My camera has been working well since originally posting this.

Ah I see, duly noted. I will scope out the settings in the camera, maybe audio is disabled there for some reason. I actually don't have auto update enabled - I have BI set to notify me when there's a critical or highly stable update, and then usually I wait a couple weeks before installing it...

Interesting!! The camera does support audio, but I tried disabling it anyway and it seems like that might be the answer - no signal lost alerts in the last couple minutes (There would have been 20 by now) and the app is behaving too. Cautiously optimistic. I don't really need the audio although...

In a different post recently I mentioned some difficulties getting my new IPC-T24IR-AS to come online and join my 9 other cameras in BI. I finally figured it out (it was an ONVIF authentication issue), and now I can see the camera. Now it's a different problem... the camera is dropping signal...

Figured it out! Super random but I was just messing with settings in the WebUI and discovered the ONVIF login credentials. I made a unique password for that (Separate from the admin password) and then used that in BI and bam, popped right up. Super weird because I didn't have to do that with my...

Assuming you mean copy the main / substream info from one cam into the new one... I just tried that, no go. You think I should do a factory reset even though it's a brand new camera? I'll try it just want to make sure I understand.

I have had Blue Iris with 8 POE and 1 wireless cameras, running in a stable configuration for a couple years now. I went to add a new POE cam, an IPC-T24IR. I wired it up and added it to my POE switch as I've done before. I configured the camera's IP address, made sure there were no conflicts...

Thanks both that kinda seems like a no brainer!

I have 7 PoE cameras wired for security in / around our house connected to blue iris, everything working well. I'd like to add one wifi camera to use as a temporary baby camera. Are there reliable cameras that do this with decent low-light capability (probably with IR flood)? PTZ would be a...

I don't think that's accurate. The only model I have loaded is ipcam-dark (default models unchecked), and everything is lowercase and I'm still getting perfect daytime notifications. Same model being used for day and night. I only have my trigger profile scheduled to switch at 1am, otherwise it...

Don’t think so - how do I load that one? Don’t see it in the custom models.

Correct on both counts. 1 is day, 3 is late night. Zone B basically marks out our driveway so we don't pick up the street or neighbor's traffic. Those settings have all been stable and working well.

I'm not sure what you mean... are you referring to the "on alert..." option? I do have Car in that, but regardless it's not registering an alert to even generate a notification. Trying to fix this issue before I focus on the notifications, if that makes sense.

I'll try that, but FYI that Static dropdown references a person. This reminds me though... I have another camera pointed down a dark driveway, and that thing picks up the front quarter panel on my car that's parked out there in the darkness, every single time. Just seems super weird that a...

I'll try anything, but I don't think that's going to do it. The AI is working under daylight conditions and it picked up "Person" here just fine despite it being lowercase. I may switch over to ipcam-general next, thanks.

I've set up CodeProject AI and have had fairly good success. I'm still struggling with nighttime detection though (I posted this on a separate thread and got some advice but still having issues). Camera is IPC-T2431T-AS. It's pointed at my driveway. Quite simply I want it to alert when there's...

OK will do!

Thank you guys for this great advice! I'm going to take some time and mess around with settings based on this. I also noticed in my camera settings that FPS and iFrame were at different settings (30 / 60, respectively). That's also ill advised, no? I changed it to 30 / 30 for now.

The camera is IPC-T3241T-ZAS and best I can tell it has built-in AI (Smart Motion Detection) and it's enabled (is it supposed to be disabled for Blue Iris to work properly?). I don't honestly know what you mean default settings.

Here's a shot of the truck in the field of view. As you can see the AI seems to work fine, it's detecting it with at least 50% confidence. I take your point with the motion-light... it does blind the camera for a split second, but then it recovers and picks up people no problem. Just not the...

Here's the field of view as we speak... this is Cam3 One thing I didn't mention is that Cam2 has a motion sensing flood light that illuminates most of the field. So I'd think that would help... If this doesn't work at night that's a real problem!

This is on external cameras facing my driveway (two cameras primarily). Camera 3 faces the front of the house (so catches cars / people on their way in) and Camera 2 faces the driveway going back past the house as well as the Side Door of the house. I started using CodeSense AI (having no...

Ah I think I understand now - I wasn't paying attention to the length of the clips, some of them are 7 hours long, and hold all of the alerts for that time period. I get it now.

Trying to understand this... when I click on an "Alert" it shows me a video clip, but when I click on "Clips" I don't see those same video clips (a couple might be there but it seems randomly different. I'll try the simple motion sensor algorithm thanks.

First question... what is the difference between clips and alerts in BI? I currently have 7 cameras, and they're set to record when triggered by motion only (no continuous recording). They're all geared around Camera 1, settings are screenshotted below. By default BI shows me stored Clips for...

Spent this evening setting up open VPN on my router and getting all that working... Just looking for clarification on the settings in BI. Does this look right? Seems like I can't broadcast it ONLY on the LAN, I have to have the WAN option enabled as well. The part I drew over is my IP address...

love it thanks! Actually have an Asus router that I haven’t used in a while so maybe I’ll set up a dedicated network just for the cameras using that router and the VPN

Understood thanks! No illegal stuff or porn addiction here!