Search results

  1. C

    NVR Hanging during boot up

    Thanks to everyone for all the support to date. I am leaving for China tomorrow so will be offline for some time. I have switched on motion detection for all the cameras so now I have a red record icon and a yellow bell icon on each display. I also took your advice and connected up the 4th...
  2. C

    NVR Hanging during boot up

    Hi Corey First of all it looks like my ip address changes every day so this method won't work if I go on holiday and the IP address changes... any ideas on how to solve this? Also, tried this on my mobile and i can login to the NVR but i cannot see anything as it says "No plugin detected"...
  3. C

    NVR Hanging during boot up

    My router is from TalkTalk in the UK. My laptop and mobile phone are connected to the router, as is the NVR. The iVMS-4500 app can see the cameras because I only had to scan a QR code from the NVR for it to connect. This is the same from the PC. BUT, I have not managed to view the cameras from...
  4. C

    NVR Hanging during boot up

    My router is a Huawei HG533. I have set the following up on the router... Mapping Name Interface Protocol Remote Host External Start Port External end Port Internal Port Internal Host Enable Remove HIKVisionControl8000 nas_0_38 TCP/UDP 8001 8001 8000 192.168.1.33 Enable...
  5. C

    NVR Hanging during boot up

    Hi Guys.... I have watched a few videos but cannot work the port forwarding thing out fully.... My router has the following fields to fill in (assume I am doing this for port 80 (web)) - can you tell me if my assumptions are correct and also what is the internal port: Interface...
  6. C

    NVR Hanging during boot up

    Wow.... you are walking encyclopaedia !!! I managed to follow to step 2 but the port forwarding in step 3 is new to me so I was lost on how to do that.... I will google it tomorrow ... I'm tired from climbing up and down the ladder today ! Where do I check the NVR firmware version? Thanks
  7. C

    NVR Hanging during boot up

    Package arrived late on Friday so I unpacked the NVR and plugged in the Ethernet cables from the old POE IP Cameras but nothing showed up on screen. This morning I removed the old cameras and replaced them with the HIKVision DS-2CD2T42WD-I5 Cameras.... wow !!!! what a difference !!! The view is...
  8. C

    NVR Hanging during boot up

    Ordered today and due to be delivered tomorrow.... Will let you know how it goes... Thanks for all the support with the WAPA PDVR issue .... close but no cigar !!!
  9. C

    NVR Hanging during boot up

    The cameras seem to be UK stock: http://www.ebay.co.uk/itm/111923802606?euid=a3ea347a5b2748c994c18ccb06183067&cp=1&exe=12792&ext=32582&sojTags=exe=exe,ext=ext and so does the NVR...
  10. C

    NVR Hanging during boot up

    Thanks... that was very useful... OK, it's decided... I am probably going for: 4MP, 4mm lens, IP66, DC12V & PoE, WDR, 50m EXIR DS-2CD2T42WD-I5(4mm) £105.00 DS-7604NI-E1/4P £115.00 Total £535 Does anyone have any comments on the prices or the spec? It is an eBay seller...
  11. C

    NVR Hanging during boot up

    I'll have a chat with the POE Splitter shop tomorrow and maybe I can 'borrow' a switch to test the system with...
  12. C

    NVR Hanging during boot up

    I am not sure either but they are about 4 or 5 years old now and I am not sure what standard they are. With regard to the POE Injector, I bought the following one and used a 12V adapter to connect to it...
  13. C

    NVR Hanging during boot up

    I got a POE injector and plugged it into the adapter and into the first POE port on the PDVR and nothing... the LEDs on the port do not come on. I then plugged it into the router (say LAN4 on the router) and when I logged into the router, LAN4 was listed as disconnected. I even tried plugging it...
  14. C

    NVR Hanging during boot up

    Just googled POE Injector... I'll try to get one today especially since its a few quid !
  15. C

    NVR Hanging during boot up

    Is this POE going to be OK? http://www.cclonline.com/product/54620/TL-SF1008P/Switches-Hubs/TP-Link-TL-SF1008P-8-Port-10/100M-Desktop-PoE-Switch/NET0107/
  16. C

    NVR Hanging during boot up

    OK guys... One last thing before I give up. The WAPA guy cannot get the POE ports working. When I plug in the ethernet cables, the LEDs do not switch on which means no power through POE hence no cameras detected. Can I buy a POE Switch and use that with the PDVR LAN port to detect the cameras...
  17. C

    NVR Hanging during boot up

    OK... that has settled it... Do you think I can use the existing cameras? They are WAPA IP POE 1080p Cameras. If so, would it be better to got a an NVR and a seperate POE Switch or should I go for an NVR with POE built-in? Suggestions for models would be useful... I have only looked at the...
  18. C

    NVR Hanging during boot up

    Latest Update I installed a new image on the PDVR and found that the cameras are not detected (as before) BUT now, none of the LEDs on the POE ports are flashing.... Does this mean the motherboard is now dead? If so, it's time to bury this and buy a new kit :miserable:
  19. C

    NVR Hanging during boot up

    I tried the suggestion this morning but PC based PDVR cannot detect the IP Cameras.... I am still trying to get the WAPA people to help me solve this but with an 8 hour time difference, it's not easy... :miserable:
  20. C

    NVR Hanging during boot up

    The image installed on the PDVR is Linux based. The bootable USB drive used to bootup the PDVR the first time is not readbable in Windows. As mentioned, the cameras are not detected by the PDVR so the the supplier also gave me a copy of the windows based software (which installs WinCap) for the...
  21. C

    NVR Hanging during boot up

    Hi Corey Actually we tried a few different versions of the software and gradually worked our way back from newer versions to the older versions. The one which is running now looks like the original version I had with the only problem being that it cannot detect any of the IP POE Cameras. When...
  22. C

    NVR Hanging during boot up

    Latest Update: I have spent the past few days in email communication with the WAPA PDVR guys and eventually managed to get to someone who was technical. He gave me an image of the software that I need to install on the PDVR. After going back and forth many times, I managed to get to create a...
  23. C

    NVR Hanging during boot up

    OK, that makes sense... I will try this suggestion I have managed to make contact with the WAPA people and am trying to get info from them.... but there is the small problem of the language barrier ! I'll let you know how it goes... Thanks everyone !! :)
  24. C

    NVR Hanging during boot up

    Finally found the website of the manufacturer or distributers.... but Kaspersky says it is a REPORTED ATTACK SITE ! Here it is anyway: http://www.enwapa.com
  25. C

    NVR Hanging during boot up

    I tried to install to install using the bootable USB disk but the PDVR didn't do anything.... it just hung there... Maybe it was too slow .... I'll give that another shot before going for a new NVR... Thanks
  26. C

    NVR Hanging during boot up

    Latest update... I managed to get Windows XP installed onto the WD Purple and then installed this into the PDVR. It starts up fine and the Windows XP logo flashes on screen for a fraction of a second but then it restarts immediately. Next time it says that Windows did not start successfully...
  27. C

    NVR Hanging during boot up

    OK... I managed to make a bootable USB Drive with Win XP on there.... I changed the boot up sequence to start on removable media first... I save settings to BIOS and restart the PC and it goes through the normal check and still only gets as far as the ACPI Controller IRQ 9 but then says: Press...
  28. C

    NVR Hanging during boot up

    Does anyone have a Windows ISO image I could use? I wanted to create a bootable USB disk and then change the boot sequence to boot off the USB disk and see if that revives the PDVR. Thanks :)
  29. C

    NVR Hanging during boot up

    Hi Alastair.... I laughed hard when i read your post about curiosity getting the better of you. :laugh: I have been there and done that many times.... mostly with negative results... The second image of the empty camera viewing boxes looks exactly like what I used to see on this DVR so I think...
  30. C

    NVR Hanging during boot up

    Installed and it doesn't seem to do anything. When I click on the executables, nothing happens. this is what installed:
Top Bottom