Search results

Is it possible that you changed your HTTP port (usually 80) not your TCP port? Have you tried 172.x.x.249:5000

Hi, I have a Dahua VTO2211G-WP external Doorbell and a Dahua VTH5341G-W indoor monitor. I can add ringtones to my Android indoor monitor (VTH) easily by copying MP3's a to a "\Ring" folder on the SD Card. I understand that Linux indoor monitors (VTH) are similar using the "/mnt/sd/Ring/"...

Woo Hoo I have got it working now! I Factory reset and then reinstalled both firmware's with Config Tool No change. VTH Network connected fine but still wouldn't communicate with the VTO/SIP server (exclamation mark in task bar) and still didn't find the VTO in the setup scan. VTO seemed to be...

Thank you very much for replying. I have double checked the settings but the VTH still just wont connect. Looks so straightforward in the videos. Just wondering if the old settings are not being cleared completely. Some settings like IP address etc seem to be retained. Is the correct method of...

I hope you are correct - I would be very thankful for any hints about what I am doing wrong. My family is getting frustrated not having a working doorbell :)

I found the VTH's self test screen. All the tests seem to be successful except the "485 test" and the "433 test" Can anyone confirm if this is an issue?

In a nutshell the VTH can port scan and ping everything but the VTO. However the VTO is visible from other PC's and my phone. I can't tell if the VTO's UTP SIP port is open.

Here are the VTO SIP settings (dumped using DahuaConsole) It confirms that the local (internal) SIP port is 5060 and the outgoing SIP server port is now 5080, that the domain is VDP. I am sure the password for register/auth user 8001 is correct and for SipServerusername "admin" is correct...

Hmmm I changed the VTO SIP port to 5080 but the status is still showing 5061?

Port scanning the VTO from my Android phone gives the same results as above. However Port scanning the VTO from the Android VTH shows no ports open at all?

Thanks for your reply. Good suggestion. Unfortunately there seems to be no difference in DHCP mode. However I Just locally port scanned the VTO (from a PC) The HTTP port, the TCP port and the RTSP port are all open - however the SIP port is not? I assume it can't communicate with the VTH if the...

In fact I can actually ping everything else on the network from the VTH except the VTO????? So maybe the VTO is the issue?

Both are found in the ConfigTool scan and have the status initialised.

Hi I Bought a new Dahua VTH5341G-W indoor monitor recently. I previously had bought a VTO2211G doorbell which is working with mobiles successfully. Both have the latest firmware VTO: V4.511.0000000.0.R.20220523 VTH: V4.400.0000003.0.R.20230308 I factory reset the VTH I factory reset the VTO...