Search results

No worries! Thanks your the help I'll check all the setting again. Maybe AI cam and AI NVR fight each other lol.

1. Yep, I'm not expecting to get IVS events at night 2. you are right, there are intelligent records. But I did not see anything when I did AI search -> IVS 3. yes, it's channel #1. - Camera is on a separate poe switch AI parameters Somehow video metadata is enabled on this...

I'm sorry I may have confused you, I didn't have false alerts of stationary vehicles. When I say the camera, I mean the sd card. The camera did record IVS to the sd card. The problem is the NVR didn't have any IVS events or just a few. IVS setting -NVR records full time and Intelligent...

This is a sample of tripwire recorded by camera. (NVR didn't record anything though)

I reset both camera and nvr: Camera only recorded 41 tripwire event. Usually, it should be around 150- 200 event. NVR did not have any tripwire event. Should I add some more tripwire on the camera? (I figure out why I could draw tripwire properly on camera: without plugin for the browser, it...

Does MD have to be off on camera? I want it to record MD events at night

I don't know what I did but I can no longer draw it properly on the camera. It let me draw 3 points, then I have to pick the next point some where around the three points. That's why my second IVS looks crazy lol.

Does the NVR only record tripwire if it recognizes car or human? It almost doesn't record to the NVR at all during the day. I want to filter out motion detection such as birds , rabbits, and tree leaves shadow. On the camera, it records every tripwire I think. it even records some at night...

This is on camera (sorry, this is at night): IVS1 (I draw this using the NVR) IVS2. For some reason, I can't draw IVS on camera web interface anymore. So it looks like the image below. Search result show hundreds of tripwire event. On the NVR: IVS 1 setting IVS 2 setting...

Is it correct that tripwire AI by camera only work to search on camera directly. And AI by recorder is only searchable on NVR? I hardly find tripwire clips on the NVR if I set AI by camera only. Also, Sometime when I change setting on the camera using browser/NVR or switch smart plan such as...

I'm using external battery, It's a lifepo4 battery. I haven't thought about the battery performance. It could be overheat protection from the battery that cut off power to the dashcam. For reflective windshield, Is cover only the windshield effective?

I'm looking for a dashcam with parking mode. The temp inside car can get to 150F during noon (around 95F outside). I bought a Thinkware ARC recently, hardwire for parking mode. It's working great during cool temp (like below 80F outside, 135f inside) but keeps shutting down completely around...

Do you let it pan around at night?

May I ask how do you use this at night for lpr? Do you let it do ptz or fix-position?

One story house, no tree at all ( or it died I think lol). There is my porch which I currently mount the cams, then about 10ft yard > small sidewalk ~ 2ft wide> some grass > the street. So it's pretty close to the street. I try to zoom out but the image is too blurry to identify the plate...

Camera is B52IR-Z12E S2. The street is right in front of my house. Cars park on the street. I have one spot for rear plate. Because people park differently everyday, It's hard to find a spot for front plate capture. Do you have any tip? Should I return the cam and get this one IPC-T58IR-SE so I...

I have not had time to check on metadata. Does it need lots of setting and fine tune? How well is it during the day?

Is there a NVR that works like how you do with BI for the z12e?

The NVR can store license plates https://us.dahuasecurity.com/wp-content/uploads/2022/11/Datasheet_DHI-NVR5216-16P-I_Final.pdf It says " dedicated license plate capture camera". Does the camera B52IR-Z12E S2 work for the purpose? TIA

I just realize you said to use wincvs. I searched ftp client and thought winscp is what you ask me to use. Is this wincvs? CvsGui - Downloads The directory is from winscp. I jsut do a quick scan on the camera using nmap. Is port 21 supposed to be there?

I meant to use admin. I've been going back and forth between using a using a username or leave it blank. I checked, it said "test failed, the user has no write permission." The storage path I copy from winscp since the router doesn't show what it is.

Here is the screen I set to lvl 1 directory. It said "failed to verify permission". I setup ftp on window. The physical path is D:\ftptest which is unable put on the camera. What should I use for the path? I'll search how to use ftp error log after work.

FTP (File Transfer Protocol)

Hello, I've got some IPC-B52IR-Z12E S2 cameras. I've been trying to setup ftp function for a few days. Do you have any instruction? TIA

I had reinstall the netgear firmware. I can access ftp on the router using winscp on my computer. The link is ftp:/readyshare.routerlogin.net/shares/ which can't be used on the camera setting so I use 192.168.0.250 (router lan ip) Still get the message "Failed to connect to server" when...

I meant the setting is post 9. Is this the share folder?

My router lan ip is 192.168.0.250. I created a user with password for ftp server. I'm not sure if the directories I created are correct. I enabled ftp, port 21 as in post #10. When I use winscp, the connection fail. Is there any setting that I need to do?

Do I need to forward any port for ftp of the router to function? I can reinstall the official firmware of netgear if needed

Thanks for the info. I only need to save the records for a few months incase I need to check them.

I try winscp. When using ftp connection, I got error "...target machine actively refused it" When using sftp, it said access denied. I used the user name and password I created. The thing that I'm unsure is the code I use on vsftpd and the directories I created in the ftp setting.