Search results

Or if your adventurous, you could use VLC for the stream

Tinycam pro 'might' appear in the locked down play store, if not then maybe try apk mirror BUT nowhere is 100% safe, use your own judgement is the safest tack

Easy thing is to change your DNS servers to the ones that have the restrictions. but TBH it's a long time since I looked at the ones available

You can either side load the apk or use an app like tinycam pro

Been a googlin and so far no answers or even pointers, so I will tip my hat and ask for any help possible.... FRIEND has a Swann system that works fine, he has issues when he tries to use the IOS app Homesafe View to remote view them, the app loads OK, but the screens that represent the...

OH they had been there as well, I didn't want the OP to be too long so I did not include all the other stupid bits that had been 'tried' before I was called, and as was expected the powerlines were connected to cheap cheap bloody cheap power banks, and that in itself was a major worry. But as...

OK, off the bat, I don't normally work with Dahua equipment, but as a 'favour' for a friends friend !! I agreed to have a look a the system they had to help them out, my initial info was the house was smart wired, they had an installer in who supplied an nvr and three cameras, all sounded normal...

You may have to create an APP password for the access, Giggle changed the security on what they refer to as less secure access If this is the case, goto your giggle settings sorry google security and 2FA and add an app password

My ? wasn't in relation to IP etc, I have no issues with that, it was more about when using BI, will the automated selection yield better results for camera operation than if you were to select the exact make and model from the drop down list, or to put it another way, does BI better support the...

When installing cameras is it best to use the auto setup routine that looks for the onvif compatibility, or is it better to enter the actual unit details? I have 4 x Hikvision units and know the model numbers and specs Cheers

As a side note, ALL those that used the "Permanently Activate your M$ products for free" mainly seen on youtube, that get you to run a few lines of code that connect to 'some' KMS servers... They went offline yesterday :)

OK, I HAVE run BI on a few Intel NUC's, from a celeron, YEAH !! for testing, but mainly 2 x i7 5th and 7th gen machines. I had the machines and decided to test with them, I have the full height units units, so I have 2 drives (SSD), I used Windows 10 professional for the OS. Operation is...

Not seen this before, may be of some use to peeps on here who need more than the 100m Mikrotik GPeR extending PoE cable runs

I've watched a few of his videos and some from the others mentioned, my feelings are that he has now identified himself as an 'influencer' and as such now believes his own rhetoric, I would imagine that he has obtained a cosy relationship with suppliers like Reolink and others, and the lure of...

Decent pricing, another sandgroper here, I would suggest you 'possibly' think about a 16 port NVR, reason? once you start you often find that you want more :) Not able to offermuch help on the dahua as my setup is hikvision stuff. in place for a few years now, otherwise welcome and enjoy

Hmm Pale Moon works fine on the cameras but NOT on the NVR OK, there are a few posts on here about similar issues, mine was an issue with Windows 10 , but I do know that the IE Tab extension on chrome will allow me to see both the NVR and Cameras with full access.

Try using pale moon browser

There are a few other posts on here that 'cover' similar issues, one for me was that Windows 10 had done something on an update that NOW rendered Pale Moon as not 100% I proved this with a new install and no updates and Pale Moon worked just fine, and as is with Windows, it also worked fine...

Cheers, just the info I needed

Hi, can I just ask, what version of firmware were you on before 4.0? I am used to hikvision where you can see previous ones on the download page, but so far for me on dahua i can only see the 4.0 versions Cheers

1st off, I have limited experience of the 'Dahua' side of things, but plenty on both BI and Hikvision, so I do know my way around them. I have encountered via a friend the following unit. ismart 4208 4k 8 port poe nvr 3.212.000.1 2017/02/24 Using what I now so far, it appears to be a...

IMHO I found the Dahua interface to be a little retro and old fashioned The Hikvision early models was slightly better, but still ancient, the newer one only slightly better Blue Iris is a powerful PC based option, but has a steep learning curve. If you have the situation where 'others' may...

No point, i keep it in a folder called pr0n with a password of password1 so no chance they will ever guess that. :)

Something was bugging me, so as time is available currently.... My main machine is a brand new NUC with Windows 10 1909 pro and this I 'thought' was clean as such. I had a recent issue where chrome would not update to the latest version and nothing I tried resolved the issue, I then had an...

NFI as to why they are/could be different, but in side note, I just dropped 2 of my cameras back 1 update to 'fix' the issue that they had with web browsers... Whilst on the surface this things look simple. the truth is way deeper than that, as I am learning (yeah yeah Alistair I know it's a...

Mine is V3.4.103 build 181226, BUT be aware that 'sometimes' they are country dependent, so check the portal that covers your continent, mine is Australia ")

OK, I would suggest you install the hikvision batch configuration tool and use that to browse the nvr, I have found (c) alastairstevenson that i can see what my browsers could not see. From what you have replied, the issue appears to be with the NVR itself. not your network/modem/router/ports...

OK, at what point do you get that message? I am assuming that you have opened the browser of choice Entered the IP that you have set for the NVR 192.168.0.2 This has then brought up the actual logon screen for the NVR You enter the username and password THEN you get the error message?

can you snapshot the actual error? does not match - not sure what that indicates

OK, did some more research and found that the FW I used (190909) is only available on the EU portal, the last one on the UK portal is PC_R6_EN_STD_5.5.53_180730.zip So I d/l that one , used batch configuration and installed it to one unit Bingo... I can now use Pale Moon (with vlc plugin) and...