Search results

JUST SOLVED!!! Using TFTP and connecting the laptop and camera to a switch. Indeed, with the camera connected directly to laptop I couldn't perform the upgrade. Now, I can start working on language change. The current firmware is 5.4.0.

I opened a separate thread: DS-2CD3T10 bricked: no network access

Hello, I got a Chinese Hik camera (DS-2CD3T10) which I wrongly installed: I found water in the ETH connector when checking why isn't working anymore; the cable connector was damaged, but the camera one is looking perfect. The camera was powered thru a splitter because the switch isn't POE...

Seems when installing I didn't isolated correctly the connector and I found water on the ETH connector:(:(:( Camera was powered thru a splitter, as the switch isn't POE. Now, camera power-on (I see the LED from IR) but I cannot find it when connecting to it; I am trying to connect directly with...

Solved my issue, which was a router one. Anyway, would be nice to have telnet or ssh on NVR; would help for troubleshooting... In case someone have issues on a DD-WRT router with LAN ports (no ping between them) here is a possible solution: DD-WRT Forum :: View topic - LAN Ports problems...

Had few minutes available and I remembered that one camera has telnet... The issue is from network:(:(:( the ping from camera don't reach the NVR. So much time spent on NVR and the issue is from router:banghead: Now, what is happening with the router (DD-WRT) is a different story and the first...

Sorry. Busy with the job and didn't have time to reply. I tried the MTU change and factory reset and none was helping:( I started to question myself if isn't a network problem but I don't have idea what else to check:( I am thinking to see if isn't from a router (DD-WRT) upgrade, even wasn't...

I will play with MTU later when back home. The firmware is modded Chinese because I understood I should not apply a 7104-NI firmware to a 7104-N NVR. Sent from my SM-G930F using Tapatalk

In my view i am not doing something wrong, but i attached the network config for all (except HIK camera which is for the moment dead). BTW, I will change the 2nd DNS, but i don't believe has an influence. All these cameras are connected thru an unmanaged switch to the router and the NVR is...

- I tried with very simple password and same result:( - they are on the same network, no VLAN - TCP as protocol, I am not sure about what setting you are speaking I tried this but I am not sure I'm correctly doing it in NVR: when adding a camera as custom protocol is requesting IP, user and...

HIK camera is a different story. In the meantime died and I will open a separate post for this. Yes, the cameras are ONVIF and all have xxx.10010.xxx in their firmware. Even more, I know are ONVIF capable because i can see them, from inside the network, with TinyCam Pro on which i configured...

Hi, I'm writing here as being closest to my questions. - I have a NVR DS-7104N with firmware 3.0.13 which i purchased from China on which i changed the language with the Hikvision FIRMWARE TOOLS - I have 3 generic ONVIF camera (with 34567 port) and 1 HIK camera (3T10, in chinese because i didn't...

Hello, I found many and good offers of Hiseeu cameras and NVRs but very few words about this company. Does anyone have experiences with them? Should I try them? Thanks

I have the same issue with a Hikvision DS-7104. Searching with Fing and available ports are 80, 554 and 8000. Tried to configure with any and the result is the same. Any suggestion is appreciated. Sent from my SM-G930F using Tapatalk

Hello, I purchased one DS-2CD3T10 camera, firmware 5.4.15, and searching how to change it to english I found it is E2 platform. What is special on this platform and why I can't apply this tool to change to english? Thanks