Search results

I am aware.

@EMPIRETECANDY Do you have the DH version of the latest firmware for us?

What is the latest firmware available for this? Dahua has pulled this from their site. The latest I have is: DH_IPC-Consumer-Zi-Themis_Eng_P_V2.400.0000000.18.R.20200426

I have an IPC-T5442T-ZE along with a handful of other IPC-HDW5231R-Z cams. I use IVS triplines for email notifications and have noticed that the IPC-T5442T-ZE is much less sensitive. On the IVS Global Setup tab there is a sensitivity slider but it is underneath Anti-Disturb Enable so I presume...

I think I have my issues sorted out. I had to go back in through the AI section of the NVR and edit the IVS rule and under more re-check the "email" box, which had gone unchecked. In a few cases I recreated my IVS tripwire rules. I tried downgrading the cams and the NVR to prior versions with...

Wow, had missed that section. Thanks! Good to know it is there. That said there is nothing here about enabling a screenshot email send on IVS tripwire rule cross event. Am I missing something here? It isn't even clear where the setting is to allow the motion detect on my IPC-C35s to trigger...

After updating my NVR5216-4KS2, to this version and updating my IPC-HDW5231R-Z cams with DH_IPC-HX5X3X-Rhea_MultiLang_PN_Stream3_V2.800.0000015.0.R.200430 I have noticed that I am getting no email alerts for IVS tripwire crosses from the NVR like I used to. I AM however getting motion detection...

I know this is a Ford/Chevy debate and as time goes on different companies will jump out ahead of each other, but I (late to the game) just saw some sample pics and videos from the Hikvision ColorVu cameras, which look pretty outstanding. Starlight was what pulled me to Dahua and I have yet to...

Disregard, I resolved this myself.

I gave up on this personally and just use email screenshot notifications instead. For the number we generate I imagine it would be a pain getting all those push notifications on a phone anyway. I will admit it has me wondering if the grass is any greener over on the Hikvision side of things...

Thanks for the reply. I get that is a workaround, but it is far from ideal. I'd be more tempted to switch email clients. The thing is - automatic DST switching works great for me everywhere in the NVR and cams but here. Well - one other location has issues - the Mac version of SmartPSS is...

I have discovered an issue with the NVR5216-4KS2 and email timestamps on IVS and Motion notifications. I had this last year but frankly was too busy to look into it and it ended when daylight savings time ended. This year once daylight savings time started up, it came back (for reference, I am...

I missed a fair bit of back and forth here but I am still not getting any notifications whatsoever from iDMSS Plus on my local network. Did we all determined that you HAVE to forward ports in to the NVR to get this to work? The way I am reading it others are getting alerts without having to do...

Well that is good to know, I am relatively new to all of this and am leery of tampered/infected firmware. If you have had good luck with this source that says a lot. You are running this cam firmware with no issue? I am on NTSC now but am curious to try - as I understand it the only real...

No I do not have ports forwarded to my NVR, but if this is an important factor in getting this working I could move it and the cameras onto an isolated VLAN and give them access, then perhaps allow one-way access from my primary WLAN network to access the NVR/camera subnet/VLAN. How do you have...

I have iDMSS Plus and can test this today. I have never seen it work but I am assuming items are supposed to show up under the Alarm Manager section, right? I previously was using push type Image, but will switch to Video to match yours for the test. I am using the IVS Tripwire on NVR with...

Going through my NVR with the new firmware - I have never figured out what the IVS/Global tab was for, but on this firmware I notice I cannot select a Channel at the top to define a global area anymore. This area seems like it might be broken unless it is a browser issue for me.

Do we know who put this up and have reason to believe it is official vs what we get from Andy?

Thanks - have been wondering if they were top/bottom or spaced both on the bottom like the Z version. When you have had the ZE IR on, have you noticed any real difference in IR coverage?

@looney2ns Can you tell us where the IR is on this model or post a picture? Have been curious about this and if the placement/orientation is any different on ZE vs Z.

After installing this firmware on my NVR5216-4KS2 Dahua NVR 5216-16P-4KS2 I have been able to subscribe to push notifications - however after setting it up I am not getting any IVS notifications. Has anyone else seen this work?

I updated to this firmware without a factory reset and it retained all of my settings. I did need to clear my browser cache before getting back into the WebUI for it to look right though. All seems to work well and I was able to subscribe to IVS push notifications in iDMSS Plus finally. I am...

What is the advised upgrade procedure for NVRs and cams? Factory reset and upgrade? Or is it ok to upgrade in place with existing settings?

Where do you see this available for download? The two available resources I know of are: Index of /DAHUA/ Firmware - Dahua Technology However neither of these seem to have this version. Would love to see where you are finding this.

I am having an issue with email notifications for one camera specifically. I have notifications for email set up through the NVR (NVR5216-4KS2) and not through the cameras (currently three of model HDW5231R-Z). It seems like I get 3 email notifications with 1 being s screenshot for every other...

Thanks Andy!

@EMPIRETECANDY I have this same problem using iDMSS Plus on iPhone and iPad. I am using an NVR5216-4KS2 (System Version:3.210.0003.0, Build Date: 2017-04-18) and accessing just on the local network. Just bought the app to test and found myself stuck in the same problem others are having. Have...

Well - to report back, the iDMSS Plus app does not give you the option to view IVS recording events in playback. It does have the option to configure IVS events for push notifications with either "Live Preview", "Video" or "Image" pushes. Unfortunately all of this fails due to the "Failed to...

Thanks DavidDavid I ran across another post that seemed to imply that IVS rules were in the paid app last night but nothing quite as concrete as what you linked to. What is confusing to me (and I may just have to find out) is if IVS rules are searchable in "Playback" like they are on SmartPSS...

Does anyone know if you can view IVS rules on mobile? In iDMSS HD Lite on iPad I can only search for Regular, Alarm and Motion Detect recordings. Is this enabled in the Plus version? Or, does anyone know how to get IVS rules to trigger alarm recordings so they are visible that way? I know...