Search results

  1. E

    [tool] [tutorial] Free AI Person Detection for Blue Iris

    I got avx working on my i7 8700 but I had to enable some options in the bios like Hyperthreading and Trusted execution.Virtualization was already enabled . I don't know which option got it to work. But I still get the little boxes when starting deepquest. However I ran it overnight and it is...
  2. E

    [tool] [tutorial] Free AI Person Detection for Blue Iris

    Tack it to the end of both the pull and the run command. The celeron cpu probably does not have avx
  3. E

    [tool] [tutorial] Free AI Person Detection for Blue Iris

    Have you tried the run command with :noavx
  4. E

    [tool] [tutorial] Free AI Person Detection for Blue Iris

    Yes you are right virtualisation is enabled and yes docker will not install without it. Tried on my laptop
  5. E

    [tool] [tutorial] Free AI Person Detection for Blue Iris

    @pbc Whenever I got the little boxes above v1/backup I had a problem with deepstack. Proabably did not load properly Strangely the only way I get deepstack to work is if I use the :noavx parameter even though I have an i7 8700 cpu which has avx2 I stop deepstack with docker stop containerid then...
  6. E

    New Mini PTZ

    Thanks @bigredfish did not know these were out already. The news release was from a few days ago so they have a new one out DH-SD1A404XB-GNR which has a few features added on but probably the same sensor and zoom
  7. E

    New Mini PTZ

    I would be interested in the bullet mini PTZ if it has at least 10X zoom and a reasonable price but who knows when it will be available https://www.dahuasecurity.com/newsEvents/pressRelease/2807
  8. E

    Danua's White paper on Starlight

    Attached is Dahua's White paper on Starlight I have a question or 2 on the paper. Is Smart codec considered to be H265+ ? Will Blue Iris 5.0 handle 265+ I have tried to set the 2831T-ZS smart codec to on and Blue Iris seems to handle the live view OK but not the recordings especially at night...
  9. E

    Dahua HFW-1831E in-depth review

    The specs for the 2831T-zs Lite 1.0 do NOT show the cam as being Starlight+ but the Lite 2.0 SHOWS it as being Starlight + so the question remains DID Dahua add the algorithms to make it a Starlight+ in Lite series 2.0 OR is it a Starlight+ in Lite 1.0 The lens is the same.
  10. E

    Dahua HFW-1831E in-depth review

    But that is my point the sensor is the same. There is only one 8MP 1/1.8" sensor made by Sony which is the IMX334. No other manufacturer makes a 1/1.8 sensor as far as I know and it does not look like Dahua has made a sensor change between Lite 1.0 and Lite 2.0 series
  11. E

    Dahua HFW-1831E in-depth review

    It looks like the NEW Dahua 2019 Catalog explains things a bit more. The Lite 2.0 Series specs show the 2831T as 3.7-11mm varifocal only, while the 2531T, 2431T and 2231T have the 2.7-13.5mm lens The 1831 seems to be no more What I would like Andy to ask Dahua is 1. Is the 2831T version 1...
  12. E

    Dahua IPC-HFW1831EP questions

    In your night profile in Settings-> Exposure set Mode to manual then lower gain until IR turns on like maybe 0 - 50 or 60 from 0 - 90
  13. E

    Dahua HFW-1831E in-depth review

    Another daytime shot on vivid at the widest fov
  14. E

    Dahua HFW-1831E in-depth review

    Thanks. Excellent review as usual. If the sensor is the Sony IMX334 it is Starvis.
  15. E

    (8MP) IPC-HFW1831E Review

    @Truthinadv Don't forget the HFW2831T-ZS which is the motorized varifocal version with the same sensor but a 1.9 lens It also has an sd card slot. More expensive but worth it. There is a small difference at night compared to the 5321R-Z but just add a motion light and it switches to colour
  16. E

    Dahua 4k Starlight with 1/2 sensor (CVI only for now)

    You must have the magic touch. I have the 2831T-ZE and with the same parameters the highest I can go is 15104 Have you updated to the latest firmware ie 2018-07-31 @Burton i can set it to 15000 and it seems to stay at that value
  17. E

    Dahua 4k Starlight with 1/2 sensor (CVI only for now)

    When will you be doing the comparison ? 0.006Lux/F1.4 ( Color,1/3s,30IRE) 0.05Lux/F1.4 ( Color,1/30s,30IRE) The figures above are for the 5231R-Z and the ones below are for the NEW 1831 and 2831 cams 0.004Lux/F1.9( Color,1/3s,30IRE) 0.09Lux/F1.9Color,1/30s,30IRE) It looks like the figures for...
  18. E

    NVR5XXX-4KS2 latest new firmware.

    This firmware is now available on dahuasecurity.com under Support-firmware-nvr.I have installed it with no problems but I have just done some initial tests. I have an nvr5208-4KS2 bought off Aliexpress I am waiting for the firmware that will put the Monitor into sleep mode when nothing is...
  19. E

    Nvr52XX series no power saving/sleep mode

    New user of Dahua NVR52XX-4KS2 8 port non POE is wondering how everyone uses the VGA or HDMI connection to the Monitor ie the OSD The monitor displays the cams in different configurations depending on what is selected. But does the Monitor ever get into sleep/power saver mode ? Normally it is...
  20. E

    Dahua NVR5216-4KS2 / NVR5216-16P-4KS2

    New user of NVR52XX 8 port non POE have been running Blue Iris for 9 years and wanted a Dahua NVR as a backup to the ageing i7 PC running 24/7 with no problems. Have almost everything working but cannot figure out how to set NVR so that it can sleep the monitor when nothing is happening. With BI...
  21. E

    Dahua NVR 5216-16P-4KS2

    New user of NVR52XX 8 port non poe have been running Blue Iris for 9 years and wanted a Dahua NVR as a backup to the ageing i7 PC running 24/7 with no problems. Have almost everything working but cannot figure out how to set NVR so that it can sleep the monitor when nothing is happening. With BI...
Top