Search results

Did you edit the EZVIZ config file from the installation to include the Show=1 ??

You need to click on the gear icon (All Devices) in the lower left corner not the "Menu" button. It should bring up a dialog box titled "Devices under the Account". On that screen press the "Avanced" button and it should bring up the "Remote Configuration" dialog.

Try using the EZVIZ Studio software (EZVIZ Support - Creating Easy Smart Homes) i mentioned in reply #310. It seems to have all of the settings available for the DC1C including wifi. The wifi settings allow you to pick/enter the SID using either a scan of seen networks or manually entering. I...

I have the db1c up and running great! Couple of things I found was to install the EZVIZ Studio software to do the other config stuff. Not sure on the Hik-confg software but the EZVIZ Studio software with a mod to the config file works really good and allows most, if not all config settings to...

According to Dahua's install manual (https://www.dahuasecurity.com/asset/upload/product/20180124/Dahua_PTZ_SD29_Series_PTZ_Camera_Installation_Manual_V1_0_11.pdf) it is located around the SD card slot. See install manual page 3 (or PDF page 9 for details)

Just a observation: I noticed that you say your router is a Asus TM-AC1900 Router, which I think is the AC1900 supplied by T-Mobile. Those routers have been modified from the original Merlin firmware, and may not fully support VPN. Re-installing the actual Merlin firmware might make a difference.

Another thing to check is your profiles. Do you have a profile that is changing at some period of the night that would be set to not trigger. You should probably post your profile settings. Do you have a daytime and night time profile maybe? Just need a lot more info on what all your...

Hmm, ok, need some additional info. What are your power settings for the BI PC. They should be never sleep or hibernate. I don't understand what you mean by "BlueIris is open on the server, triggers and alerts work well. Close BlueIris on the server, triggers and alerts stop. " If BI is...

Sounds like you don't have the 'Run as a Windows Service" checked. It's located on settings in the Startup tab. Just make sure it's checked. That way when you close the UI the server is still running.

Mine is working ok. I had put http:// in front of the command, duh. You might check your web server settings under advanced. See if you can use the limit IP addresses ^ character to select local addresses that don't require login. For example: entering ^192.168.1.* would exclude all ip...

Ok, tried your command in the "Post to a web address,,,) in the alert section for the camera and I am getting an error back. Looking the log it shows "Web: error: no stream" I use the alert section "Post..." for setting camera ptz and setting the profile for a particular camera and haven't...

Does it work when passed via a browser? I always test in a browser first to see if the http command is working.

I just used the chrome browser to test the http command. The data should be returned in the body section of the browser.

Tried your string on my system and worked fine. I noticed that you have a space in your command between the profile= 2, which might be causing problems depending on your browser. Try removing the space or add a %20 in the http command (see below)...

I use Domoticz, which is a free open source solution that supports many hardware platforms and protocols, Z-wave being my primary. You can communicate with Blue Iris via JSON, HTTP, IFTTT, and others. My Z-wave controller is the Aeotec USB Zwave controller (about $40+). Domoticz supports...

I'm on Android and I occasionally find that the Geofence isn't registering with Blue Iris. Sometimes I think it's just the Android phone not doing it's geofence thing and other times it reports exiting Geofence, but BI doesn't change. I found the same solution as you stated, that usually...

Just a nit, but it appears the "Use last window position" in the windows option of Startup tab, isn't working any longer after update. I have had BI startup on my second monitor since forever, and now BI always starts on main monitor and I have to move it to the second.

Glad everything is working .... :-) Yes BI is pretty amazing.

Yes, just add &trigger to your URL. (It's case sensitive)

So it doesn't take your login credentials from the URL, i.e. you have to specifically enter them? Also your CAM3 didn't move to your defined preset ? Check on the web server dialog box and click the advanced button under the "Remote, external(WAN/Internet access)" Under authentication: Select...

Make sure you are using the "Short name" (CAM 3?) of the camera and there is a preset defined and is working for preset 2. i.e. press 4 on the PTZ portion of the Blue Iris main screen. (look on the general tab on the main camera properties and use the name under "Short Name" . Maybe its...

Here is what I have been using that has worked great... (pretty similar to Vettester' method) Select the camera in BI that will cause the trigger... Bring up the properties for that camera... Click on the Alerts tab... select which profile or profiles this will work under... Under "Actions"...

Been experimenting and have found that if I check both Combine or cut video each x hrs" and "Cut video when triggered with break time" I can get what I wanted. If recording is continuous then I get multiple clips when a trigger occurs but still get other clips that are still contiguous in...

So I am slowly getting into the all the cool stuff BI does, but have run into a issue. It appears when I set a record option/camera using a profile, that option isn't changeable with different profiles. For example I have profile 1, video option, set to "When triggered" and the option to "cut...

Depends on your router settings for the BI Server. If you have the BI webserver port forwarded, then it is visible to the WAN (or if you left it at 80). According to the BI Help file, If you leave the "Use secure" unchecked, blue Iris will still use basic authentication, however once logged in...

It appears that BI still prompts for a username and password the first time logging in. I was hoping setting the Non-LAN option would prevent the webserver from being open to the WAN, but that seems to only work when you check "Use Secure Session Keys" which then breaks the ability to use the...

Was having same problem as jazzy1. Found that I had to uncheck "Use secure session keys and login page" under the Webserver tab->Advanced dialog. Tried using Authentication setting as Non-LAN only with "Use secure session keys and login page" checked, but didn't work when accessing from LAN...