Search results

  1. beepsilver

    DS & Motion Detection Rectangles

    Looks like a processing speed issue wrt Deepstack. Do some experimenting...reduce DS mode to Low, don't use any custom models including facial recognition, try reducing your interval to 500msec in the cam's AI tab and set your make time (trigger tab) to less than a second. If you're using the...
  2. beepsilver

    5.4.7 - May 25, 2021 - Support for DeepStack custom model files

    I tried using 999 with several of my cams but I don't think my computer was up to the task...sent my CPU skyrocketing when two or more cameras triggered at the same time :D Stuck using the CPU version of DS (no NVidia card).
  3. beepsilver

    5.9.11+ and Dahua 4MP cams

    Long shot, but check your record tab to make sure none of the offending cams had "Direct-to-Disc" turned off during one or more updates. It's been known to happen.
  4. beepsilver

    5.4.9 - June 25, 2021

    If you use substreams and choose continuous+trigger in your cam's recording tab, you can still get the info you're looking for albeit in your substream format.
  5. beepsilver

    5.4.9 - June 25, 2021

    Thanks and welcome to the forum! I have to ask, what's the story behind your avatar?
  6. beepsilver

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Mostlychris, forgot to add (and you may have read this elsewhere already), but if you modify custom model settings in BI, you should restart your computer to be sure all DS components have properly closed and new components are started anew. I do this whenever I update BI to a new version as well.
  7. beepsilver

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    For any 'person' in a frame before the asterisk or with the asterisk, what sort of icon do you see next to 'person' in that analysis? If you see an icon of a person with a percentage above your specifications, you should probably contact support because the software isn't behaving properly and...
  8. beepsilver

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    No need to check apply to motion triggers only. If you're not using facial recognition, you can take unknown from the To Confirm box. 750 msec is fine since you're not looking for fast moving vehicles on that camera. You might consider lowering it if you want to detect bicycles flying by or...
  9. beepsilver

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    The asterisk is a confirmation that the alert is either confirmed or cancelled--in this case cancelled. In your example, when you scroll down through the analysis you'll likely not find 'person 66%' or any other object you've designated in the To Confirm box of the camera's AI settings. I'm...
  10. beepsilver

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Is the analysis you show here a product of you streaming video with 'Analyze Using DS' enabled (from the right click menu of a streaming video) and watching the results as they occur (not optimal)? Or did you drag and drop the applicable .dat file from the Alerts folder into the DS tab of the...
  11. beepsilver

    5.4.9 - June 25, 2021

    Confirming Vettester's info with my own settings:
  12. beepsilver

    Deepstack not detecting anything 100% of the time: Server Error 100

    You won't see anything in the AI tab unless 1) you have testing and tuning>Deepstack on (right click on clip playback--may need to restart clip after enabling). Then play your video with the DS tab open to watch results or better still, 2) drag the applicable .dat file from your Alerts folder...
  13. beepsilver

    5.4.9 - June 25, 2021

    So the default 15 seconds is likely more than enough time for most setups. If I understand this correctly, if 5 additional images are added to the analysis requirement (after the two automatic images) at 1 second intervals, a total of roughly 7 seconds should be needed to complete the analysis.
  14. beepsilver

    5.4.9 - June 25, 2021

    On .13 using CPU version. I'm seeing the same wrt to timing of DS analysis frames...changing leading image, pretrigger buffer, make time, DS analysis intervals, etc., affects DS analysis timing somewhat, but difficult to make sense of it enough to manage it properly. Also, there are some weird...
  15. beepsilver

    Blue Iris V5 Deepstack - Person detect close to camera - Further away Peson or Car not Detected

    Also, as Looney pointed out, you might have your zone rule wrong. You have Zone A covering most of your walkway and driveway. Under Zone A, you have Zone B which covers the same area minus the walkway up to the front porch. What are you trying to accomplish? Since you have Zone B in the...
  16. beepsilver

    Blue Iris V5 Deepstack - Person detect close to camera - Further away Peson or Car not Detected

    Take your flag down and test again. The slightest movement of the flag into your field of view causes Deepstack to start analyzing. If this happens at all when there's a real trigger in your view, you'll likely miss it. I look at it like this: A car is 8 seconds away from your camer and is...
  17. beepsilver

    5.4.9 - June 25, 2021

    And you're using Continuous+Triggered in the Record tab with a pretrigger buffer of ?
  18. beepsilver

    Latest new IPC-HDW5231R-ZE IPC-HX5X3X-Rhea_MultiLang_PN_Stream3_V2.800.0000018.0.R.210707

    I should have asked if this update adds SSA to the IPC-HDW5231R-ZE . Currently I do not have the option on this camera. My current firmware version is 2.622.0000000.31.R, Build Date: 2018-08-13
  19. beepsilver

    5.4.9 - June 25, 2021

    I think this is the new addition:
  20. beepsilver

    Latest new IPC-HDW5231R-ZE IPC-HX5X3X-Rhea_MultiLang_PN_Stream3_V2.800.0000018.0.R.210707

    Does this firmware update add SSA to backlight options with the existing BLC, WDR and HLC?
  21. beepsilver

    Specify zones used for DeepStack [5.4.9.9]

    There doesn't seem to be much about these changes in the Help section leaving me with some questions. The new timeout feature in BI settings>AI defaults to 15 seconds. Does this override the camera properties>trigger>AI settings for number/interval of frames to analyze? As of now you can set...
  22. beepsilver

    Compare camera settings

    I tried this just to see what the human readable text file might look like, but holding the shift key while clicking export only produced a prompt to save the camera's .reg file. So I changed the extension to .txt while saving and took a look at the file...didn't provide much useful info, just...
  23. beepsilver

    5.4.9 - June 25, 2021

    Ah, I see now, you're suggesting a feature that isn't currently available. I wonder if checking 'Not required for re-triggers' in the Object Detection/Zones might do this. Regardless, it's a good idea; have you reached out to support?
  24. beepsilver

    Boston Dynamics Brings You...Spot

    Only $74,500...wonder if Andy can get it cheaper with fast shipping?!
  25. beepsilver

    5.4.9 - June 25, 2021

    Can you elaborate on this please? Not sure I follow "break time re-trigger needs to re-trigger the AI looking again." Do you mean by setting a short break time will give a longer trigger another opportunity for a second deepstack analysis? Also, are you using High, Med, or Low mode?
  26. beepsilver

    5.4.9 - June 25, 2021

    For me dark.pt was causing error 100s (haven't enabled facial recognition in a while). Still running dark.pt and haven't seen any 100s since .7. Am also using medium mode versus high.
  27. beepsilver

    Trigger seems broken?

    Post an image of the field of view for that camera and where you want detection to occur and not occur--we can easily help you set it up to give you far less alerts without causing problems. BTW, you could stand to lower your contrast some....low 20s should be good.
  28. beepsilver

    Trigger seems broken?

    After you reboot cams/computer, upload images of your trigger configuration here to include obj detection and zones. If you're using deepstack, upload AI images as well.
  29. beepsilver

    5.4.9 - June 25, 2021

    Just the zone A under object detection but nothing checked for resets for size or object travels
Top