Search results

  1. S

    Strange camera behavior

    Beer time !!!
  2. S

    Strange camera behavior

    Just unplugged all current cams and turned off power on nvr and just plugged the rouge cam in and still won’t connect to ports 9-16 but will work in 1-8 !! Appreciate all efforts but think it’s better to just accept this weirdness and get on with my life
  3. S

    Strange camera behavior

    I will unplug them all sometime today , the camera is no more power hungry than what I am unplugging to replace it with and as said earlier the original camera I am unplugging to allow this one on is powering up no problem on the 2nd bank of ports and the other observation is that power is being...
  4. S

    Strange camera behavior

    Yes tried factory reset while in that port and doesn’t pop up on registration page….and yes other unplugged cams pop up and get assigned to the relevant port when I move them!! This is so weird
  5. S

    Strange camera behavior

    Like your style bigredfish!! Straight and honest reply !!!! Personally don’t like bourbon but will smash down a few German wheat beers instead
  6. S

    Strange camera behavior

    Ok, not sure I made it clear enough so apologies… the rewired camera will work perfect on ports 1-8 but not on 9-16 but any current camera I take out of ports 1-8 will work ok in 9-16!!!
  7. S

    Strange camera behavior

    Hi guys, been reading untold amounts of posts to see if I can figure this out but so far no luck!! So here’s the story …. I had a camera from Andy IPC HFW5431 Ep-Z all working ok on a dahua Poe nvr…. One day it stopped working and think it was due to corroded pigtail connection. So replaced the...
  8. S

    NVR email test working but no IVS event email

    Again many thanks for offering help and ideas everyone,
  9. S

    NVR email test working but no IVS event email

    Yes spent all morning getting ivs trip wires and intrusion to work!! It’s adding as intelligent on the time line on recording, I rebooted nvr also this morning and can’t think what else it could be …. Frustrating
  10. S

    NVR email test working but no IVS event email

    I know there have been issues surrounding the email notifications but is there a genuine good fix to this ? Ie is there a 100% email supplier that works without issue?
  11. S

    NVR email test working but no IVS event email

    Yes mate it’s still checked on …like I said I hadn’t turned anything off but hadn’t noticed it had stopped sending emails!! Would the test email getting through to me mean that in theory the email is working and not being stopped?
  12. S

    NVR email test working but no IVS event email

    Thanks wittaj I am using btinternet as my email as previous gmail stopped !! Is it possible that the test would get through but the nvr alert with snapshot could be prevented?
  13. S

    NVR email test working but no IVS event email

    Hi guys, up until recently I had one of my cameras sending an email with snapshot work ok. Didn’t realise but it has now stopped being sent !! Do not remember stopping them and have as far as I can see not unchecked anything!!! For example have ivs set up, it’s adding it in the search function...
  14. S

    Confused regarding viewing IP Cam through IE explorer

    Many thanks bigredfish so just uncheck and continue, and in your opinion use this direct method to do all main changes to system?
  15. S

    Confused regarding viewing IP Cam through IE explorer

    Good evening everyone just an update!! Checked nvr and remote host wasn’t enabled so obviously did so and now the blue e icon is blue!!! Clicked one of my cams and a new window opened and is asking me to accept P2P !! Should I do so or not ? Many thanks will try and go through the forum to find...
  16. S

    Confused regarding viewing IP Cam through IE explorer

    Will look on nvr when I get back home many thanks Steve
  17. S

    Confused regarding viewing IP Cam through IE explorer

    It’s an nvr5216-16p-4ks2e/
  18. S

    Confused regarding viewing IP Cam through IE explorer

    Thanks for quick reply jarrow!! Was able to do so on previous NVR with a work laptop before a power failure meant buying a new.NVR and can’t remember enabling this feature!! Where is this enabled? NVR or laptop please ?? Steve
  19. S

    Confused regarding viewing IP Cam through IE explorer

    Hi all, run everything through Dahua 16 port Poe NVR but borrowed an old ish laptop that doesn’t have edge to be able to get into cams directly but after going through web to NVR the icons for ie are greyed out and can’t open anything!!! Any ideas what causes this please ? Even tried pale moon...
  20. S

    Deep IVS and Smart Plan missing in SD49425XB-HNR

    Dont think it works for mac OS
  21. S

    Deep IVS and Smart Plan missing in SD49425XB-HNR

    Thank you wittaj, can i still do this even on a mac? just load pale moon?
  22. S

    Deep IVS and Smart Plan missing in SD49425XB-HNR

    Hi miljume, hope you dont mind me asking do you use just the nvr to control everthing or do you use internet explorer? I have same cam, bought from Andy so has auto tracking but i cannot see deep ivs so cannot set up the tracking!!!!!!! is it only found if go into cam directly via IE? I keep...
  23. S

    Nvr and switch in different positions help

    Sorry for lack of information but at work and don’t have full details but is a dahua 16 port Poe nvr cheers everyone
  24. S

    Nvr and switch in different positions help

    Many thanks really big help will order switch and update when working
  25. S

    Nvr and switch in different positions help

    Ok so before I buy a switch can I just double check if I have this correct?? main house router with four Ethernet ports all full with one running to out building. add a Poe switch next to it with extra ports, connect it to router with Ethernet cable ? Add 2 new cams to new switch Run the...
  26. S

    Nvr and switch in different positions help

    Many thanks looktall, not the best with actual networking!! Can install cameras and wire the Ethernet cables but struggling with actual network knowledge!! So are you saying that I can send 2 new camera data down the internet cable supply to my out building and it will work without anything else...
  27. S

    Nvr and switch in different positions help

    Hi guys, hopefully a quick and easy question!!!! I have 11 dahua cameras all running to an out house building where a dahua POE nvr is also located. I run an Ethernet cable from my main house to supply internet access via a single Ethernet cable. If I was to add 2 extra cameras on my main house...
  28. S

    No power to nvr

    Thanks for all you help will open up again but when I looked originally I didn’t see any lights on and fan didn't spin are you saying that it sounds 100% supply ? If so will buy at that price and hopefully have a spare nvr ready for any other issues Steve
  29. S

    No power to nvr

    Many thanks guys for all help, have ordered a new nvr off Andy as here in uk the power unit is prices around £150 and thought it better to get new one as if something else is wrong I will in effect pay for a new one in parts!! Power unit is DPS-200PB-185 B Steve
  30. S

    Help new NVV

    Good morning everyone who tried to help me, finally got round to factory resetting all 11 cams yesterday as rain had been delaying things, as per bigredfish this solved the issue and now have all cams added with green lights!!!! really appreciate the help from everyone... As all are reset should...
Top Bottom