Search results

Yes did a reboot, shutdown, unplugged, plugged in VGA cord and it didn't work. But i did do a restore to default for display with vga plugged in still and it magically fixed itself. Just trying to understand what would have caused it and what does the "decode not enabled" error mean? I assume...

I have a Dahua NVR5215-16P-4KS2E that has been working flawless since 2018. I have a monitor hooked up by HDMI with several 9 cameras in the split screens. I happened just to click into one of the cameras and then clicked back out to view all the screens again, and not it says "decode not...

How long can you stream on the Amazon Show? Can I let it stream a infinite of time or does it auto shut off?

Sent you an email!

There are a couple of coax cables that will just be to tough to replace with CAT6 unless I open up some walls. Are you able to still get sound from the IP Camera through coax though?

What is the difference between this and the EoC Passive Converter The LR1002, besides the huge price difference. https://us.dahuasecurity.com/product/eoc-passive-converter/

I'm trying to create a new system for my parents and I didn't see a sticky of the list with the latest Dahua Cameras. 1. What is the Best Dahua Turret camera for low light conditions? And any of them happen to be varifocal? 2. What is the Best Dahua Bullet camera for low light conditions? And...

Amazon has a good deal on Samsung Evo Select SD Cards if you need to stock up! - https://www.amazon.com/Samsung-MicroSDXC-Adapter-MB-ME128GA-AM/dp/B06XWZWYVP/ref=sr_1_1?keywords=samsung%2Bevo%2Bselect

Can you explain how Day/Night profile works? When does it switch over? Currently I don't use b/w and my cameras are always in color mode but do have different settings for day and night.

Can this firmware be used on IPC-HDBW4231F-E2-M?

Can we edit IVS in this interface, I can't seem to find it.

Their are two files provided which one are you suppose to use and are their instructions I can find on how to update the firmware on Dahua NVR? Thanks

I ordered NVR5215-16P-4KS2E from you, does this firmware work on this model?

You guys were right, not sure why it was dirty on the inside, but images are sharper after cleaning inside the lens.

I have two IPC-HDW5231R-ZE and one of them seems to be hazy (not as sharp). They both are set to the same settings(camera/encode) and the lenses are clean in and out. What would cause this? You can see the difference between the two.

I'm actually using Abode to trigger an external Alarm plugged into a smart plug. If my Alarm goes off so does the external siren; in addition, I can trigger the alarm with a push of a button but turning on the smart plug.

I'm mostly happy with the nvr, I just have to use it through the web user interface too get the most out of it. I use gDMSS K plus and open vpn.

You need to login to the NVR through the Web Interface, Go to IE Browser and enter 192.168.1.108 in the URL 1) Click Setup Tab on top 2) Click Registration Tab on Left

I have the same NVR and I don't see an option to turn on/off IR, you have to do it directly through the camera.

I made the mistake of buying a 4 channel system and I wanted more and better cameras so I went with IP. Quality is much better and I'm and to do more configurations.

I was able to figure out and get both cameras to display on my Dahua NVR NVR5216 but still not on my live preview or settings through the GUI. Here are my instructions for others in the future. 1. Since the Dahua NVR5216 have EPOE/POE ports and auto assigns IP I plugged it in to see what IP...

Hi Guys - I bought one of these cameras and hooked it up to my Dahua NVR, it recognized one camera with 1 ip address so I added it my Registration on the NVR. 1)It only displays 1 video on my NVR since it's on one Channel, how can I display the other camera on another channel? 2) Also, when I...

I think I figured it out, I had to go to Smart Plan and click IVS for each channel

Okay I switched to a different browser and I see IVS now. I been youtubing how to setup and notice after people set it up, if you go to the live view you should see your tripwire and it will change color if triggered. When I go to my live view I don't see anything. Is their something else I...

When I try to setup the Tripwire/Intrusion on the Dahua NVR nothing happens when I trigger it by stepping over the line. When I try to go hit my Dahua Camera 5231/5281 directly, the IVS page doesn't load. What am I doing wrong? However, if I click Face Detection or Abnormality, the page loads.

Thanks that worked, I didn't see those little icons!

I can log into the Web Interface of the NVR just fine (but it has the same settings as what I see when i'm viewing the NVR on a monitor directly, just different UI). In addition, I couldn't get my Mac laptop to connect to any of my cameras even though I put my LAN TCP/IP of my mac to the same...

I do have a epoe nvr but I couldn't see my cameras when I connected my Mac to the nvr (I have 7 cameras plugged in at once + Mac Laptop). I updated my lan tcp/ip in the range of my cameras but when I hit the cameras ip on the Mac I get nothing. But I can hit the nvr using the subnet. Something...

I just recieved my 5831/5231 cameras from Andy with the latest firmware and noticed that it says 'Config File' with drop down selections of 'Config1 / Config2 / Config3' is that Day / Night / Normal? Is it true I can no longer schedule when the camera sets to a Day or night profile? How are...

I have Dahua NVR and Dahua camears (5231 / 5831), are their more settings if I access the camera directly through laptop or does it have the same settings that I see on the Dahua NVR? 1. For example I seen videos/images of others where it says' Config File' they have Day / Night / Switch by...