Search results

Any replies to why this may have fixed the issue?

Is there a tutorial for setting up your Blue Iris AND your router for the Web Server so i don't have to use Easy4IP? I cannot get it working to save my life. I have tried everything. I couldn't get the BI App to work either. I am stupid to Port Forwarding so please be detailed or point me to a...

Here are the changes I have made that made everything 100% better. I set all cameras to 264H instead of the 265. This made all the fast travel smooth and with hardly any chop unless really fast. I also set blue iris up to intell+VPP and all cameras are also setup to Intel+VPP.

Was a setting in the actual camera. The default Gateway was not set for the router. I changed the router's IP.

I appreciate your Help, What setting would I change in the new switch so that the built in Easy4IP works? Before I was able to view the cams on my smartphone via Easy4IP and inside the onboard cameras settings it said "Online" now that i have Installed the new switch it say "Offline" this is...

There is no SD card in any of the cameras. So if I put an SD card in the camera, and its the same way on the SD card then its the cameras?

Ok I purchased this switch Zyxel 8port Switch 70w POE+ (GS1900-8HP) I left all the camera setting alone for this testing. I plugged in the cameras and setup the Switch. After 12hrs of recording on all 3 cameras the results are the same as the "OLD" switch. I'm not saying the new switch isn't...

So i would set Blue Iris to "Nvidia Cuda" in the "Cam Propeties" "Video" tab? Another thought/question is that my Cat6 UL 100% copper wcables run thru the attic and they do crossover several (4-6) electric 110v lines. Would this cause any problems, or would it be so small that it wouldn't matter??

Do you think it could be the switch?

The Switch is located in the garage on top of the cabinets. What I did was ran a Cable thru the house down the hallway from the switch in the garage to the PC (GREEN wire). The wire with the (RED X) is the one removed.

OK. What would be a good POE+ Switch to buy? What would YOU Use?

OK here is what I did that has helped the most. 1) I turned the FPS to 25 and the Iframes to 50 2) I lowered the Bit Rate to 1792 instead of 4096 There is a slightly noticeable glitch every so often. I'm not sure I solved the problem, just making it livable. What's next to try?

What would be a Good POE+ switch for 4 cams with a "Daisy Chain" ability?

The way I have it now is - PC plugs into my Router. From the Router a Cable runs thru the attic to the garage and plugs into the POE Switch #5 port. And the 2 cams plug into #2 & 3 ports. Is this correct for the "final" way? Not for testing things.

Here is Both. I have to run I will check in later. Thank You for all the Help.

Those ports (1-4) are POE and emit electric. I don't want that going into my PC.

Blue Iris or internally?

I have noticed that if the IFRAME is the same as the cam FPS that the "choppy frame" comes in shorter increments. If I put the cam FPS at 25fps and the IFRAME at 50FPS then the "choppy frame" is farther apart. I tried doing IFRAME at 100FPS and it was in less increment but was a harder "Choppy...

The Cams are set to 20FPS internally and BI says 20.10FPS Bit Rate 613.55kb/s I have noticed that if I raise the cams up to 25(max FPS) intenally and then adjust Blue iris it gets better, but the glitch is still there slightly.

Yes but how am I going to daisy chain to another switch? This switch has 2 input/output and 4 input POE+. You can Daisy Chain these. This is what i intended to do and put another one in my garage (buried cable) The way it is now one input is taken up by the PC and the other by the Router. No...

Ok this is how I hooked it up. Please forgive me for being ignorant to what your trying to find out. I still had the same results (choppy). I will post video today on YouTube showing what I am seeing. I don't know how to edit video. I will do the rstp to VLC as well. Could it be THE SWITCH...

So you are saying to do this way? Are you thinking it maybe the Router causing this? I will try tomorrow and let you know what I find out when its daylight and cars are driving by. Thank You!

Do those cables seem like they would be fine??? I did a 20packet Ping to each camera with 0% Packet lose! Also, The Switch is a POE+ switch. The switch is in the attic where all the camera plug ends come to meet and they plug into the switch. Here is my setup now:

These r the cables I am using. https://www.amazon.com/gp/product/B074PF422Z/ref=ox_sc_saved_title_1?smid=AS8F55Q7LYHA9&th=1

Antivirus - added exceptions. Where can i find a guide to plugging the switch directly into the PC? I went back to H265 since H264 didn't help. I also enabled Intel videopostproc. Stil the same CPU is at 19% 943.mb RAM 20FPS at the camera and 25 at BI. Its like a heart beat every sec even just...

looney2ns: First, I love your Avatar looney2ns - "We're gonna press on, and we're gonna have the hap, hap, happiest Christmas since Bing Crosby tap-danced with Danny F***ing Kaye." Christmas Vacation! I will try connecting the Switch directly to the PC and test it that way. I am running AVG...

Thanxs for the Super Fast Reply! NoloC: PC is a I7 3770, CPU usage is 19% , all (2) Cams are set to H265 Seems like a LIVE! preview of 10FPS is really choppy too. Not smooth at all, is this normal? fenderman: SVC (smart video codec) is not an option when I click H265 , PC is connected to my...

Hello, this is my first post on this forum. I have been researching this forum for weeks now. I'm still unable to find a solution. I will list my problem, and my hardware specs. Here is my Problem: My live view is slightly choppy or like its skipping a frame every 1/2 second or so. You...