Search results

Web searches are your friend... you can find a lot of instructional information and documentation. Asus Router GT-AX6000 Firmware v3.0.0.4.388_23012 or later is documented as having direct support for DynDNS.

Have you created a cron entry on the Asus router that verifies and updates your DynDNS record as the public IP changes? It’s your responsibility to keep the definition correct.

Protectli is only one ‘brand’ of mini fanless PCs. pfSense minimum requirements are 64-bit amd64 (x86-64) compatible CPU 1GB or more RAM 8 GB or larger disk drive (SSD, HDD, etc) One or more compatible network interface cards Bootable USB drive or high capacity optical drive (DVD or BD) for...

There is no "VLAN process" that separates things or packets. There is no magic, you design and implement the network; define VLANs and always associate one subnet to that VLAN. I have never used multiple subnets and just know if they're not the same , devices don't communicate. YES...

Rare instances/ circumstances have multiple NICS in one system within the same subnet. Almost 100% of the time when multiple NICs are installed in one system, each NIC is on a separate subnet; VLAN or no VLAN. Most common use of VLANs is that each VLAN has only one subnet. Yes, you can have...

DirecTV comes in three flavors… 1 satellite 2 internet and 3 streaming. #2 is via an Android device #3 is any one of third-party streaming devices not possible as a channel number; perhaps an app on #2 or #3 device which would display on tv

Yes. Way too complicated.

Has the certificate expired?

I find no reference to "control port" in the GS316EP manual. The closest term is "flow control" which is disabled by default on all ports. This configures how the switch handles packets when the port's capacity has been exceeded. (something you shouldn't need to worry about) VLAN ID 1 is...

The router will be Plugged into VLAN (home) and will "see" only VLAN (home) devices Correct. The router will see only those devices on the one VLAN. The only time you should really have more than one VLAN assigned to a port is when that port is used as a TRUNK to another switch. Each VLAN...

Only a couple of these questions are 'general' networking ones. Others are very specific to you hardware and network address assignments. does the default gateway mean anything on the cameras on a subnet? No. If possible don't defined any address as the GW. If one is needed, enter a...

Can it be done, sure. Is there value in doing so, only you know. Adding a second (VLAN/subnet) route to the internet creates a challenge. This requires an L3 router or L3 switch. Pulling some 'art' from online sources, and custom changes.... a standard L3 router scenario would look like...

Assembly, macro, overlays, COBOL, Fortran, PL/1, Pascal, Basic, Ansi C..... know (knew) them well. ;)

You've quite the network. I'll presume that there is little chance of moving devices from one switch to another. Even if possible, probably would not significantly help with the solution. The simplest, not the cheapest, solution would be to implement a number of small (? 8 port poe/vlan )...

The end goal for master_tinkerer is to get all of the cameras onto a separate VLAN with a separate isolated Network; stopping any remote BOT/Malware infection/access as well as any Phone-Home attempts by the camera's OS. In the mean time establishing firewall rules to block internet, disabling...

A detailed networking diagram of all devices (router, switches, hosts, cameras, etc) is in order. If you don't have one, make one; you'll need it to create and maintain the VLAN network you're working towards implementing. I'd highly recommend NOT to use Wi-Fi for anything other than a tablet...

Did you see a previous report and solution? https://ipcamtalk.com/threads/socket-error-10054-error-code-80002746.48451/ Don’t know how a camera/BI reboot or a change of IP address would correct the issue, but if it happens to work…. it would be worth a try.

If not already, disable UPnP on all cameras and router. Create firewall rules to block (in and out) on all of the IPs assigned to cameras.

Unfortunately most books will be specific to a particular vendor. How-to for one vendor will differ from another; concept is the same but commands will likely be different. I don’t have any NETGEAR experience, my limited background is from Cisco. A quick search for basic VLAN instructions I...

Your GS752 has the ability to do VLANs. It is in this switch you will create the RED (vlan100) and GREEN (vlan200) VLANs And assign specific ports to those VLANs. Keeping with the previous convention, RED is the internet accessible and GREEN the isolated VLANs. All ports should be removed...

Need to clarify your usage of RED LAN, GREEN SUBNET, GREEN VLAN, and CHANNELS. RED LAN is actually a VLAN which is designed to be a unique subnet. GREEN SUBNET and GREEN VLAN are used interchangeably; actually a separate VLAN using a unique subnet. CHANNELS ? Create a RED VLAN and a GREEN VLAN...

Exception code: 0xc0000005 is a violation access error, most commonly a security issue. Service account and password are either the same as one used to install BI or an administrate one?

Any changes made two weeks ago? New/different account being used to start service or log on with? Is it really R atribute or account in use does not have correct permissions to directories? To confirm BI itself is running properly, add the account used for BI to the Administrators group and...

That's the configuration of the server. Where is the configuration/definition of the user? Export the user's configuration to your phone.

Not sure how this is related to Blue Iris... could you elaborate? I'm guessing that you are using a laptop, yes? At home using a wired connection and when 'out' using WiFi. Once you've connected to a WiFi service, and any requirement thereof to authorize yourself to that network there...

duckdns is another free DDNS option. easily set up and can be maintained via most any operating system. first used from an asus router and now from pfsense.

You don't need BI in the startup folder. Enabling "run as a service" is the only requirement to enable BI to start on bootup. Which username and password did you provide as BI credentials? Typically the same account that was used to install BI is supplied as the credentials. You can modify...

The error message returned is indicating that the url does not have a valid https connection. This can be attributed to various faults/failures on the host or local PC. On the PC verify that the browser is up to date; though this may create a problem if the hosts' security protocol is old and...

When changing passwords, did you also update BI to use the new passwords for each camera's settings? Changing them on the camera and in the android app does not automatically update BI.

3. Are those from the cameras or from Blue Iris ? ============== The "overlay" can be added by the camera itself or by BI. Knowing from which source it originates affects where the displayed time needs to be adjusted. Guessing from times being different across all the cameras that the...