Search results

oddly enough since monday afternoon the issue has gone away. I haven't made any other changes to the system.

since it have re-started it 2 hours ago it is now at 1.5GB. looks like when motion is triggered the ram usage goes up, but never drops back down

here you go

the green screen is on the server itself as well as any webview, and on my phone app. If you watch the recordings you see it as well. after closing and re-opening blueiris it's sitting at 780MB of ram and 3.6% CPU usage. wonder what causes it to get out of control

That is what I am going to try next. complete new start as far as the ram goes BlueIris is using a little over 5GB, Chrome is open and uses about 1.5GB, Teamviewer uses about 0.5GB so i'm already at 7GB. The rest are system stuff, gaming apps, rgb items and hardware

re-installed BI completely. I used my backup settings which were from my old virtual machine, and still get the green screen issue, If i import the settings into my virtual machine i don't get a green screen at all both machines run windows 11 64bit. Only difference is the CPU and video card

It's off and i turned off all AI settings

temps are completely normal. With nothing running other than BlueIris this is what i get. as far as ram i have 32gb, and only using 11

another i noticed, when my son is playing games on the machine there are no issues. Seems like it's something with the cpu thats causing the issue when it's not under load as no matter which video card i pick it does this. also if i enable deepstack the machine will cash and power itself down...

that did it. once it set that to the same as the framerate i'm getting 1 for Key

The FPS is all matched to 15 except for my doorbell which doesn't allow me to change it, so that's still at 30 This is what it currently looks like. Also adding my camera webpage config. It shows I/P rate, but i don't have anything that says Key

I didn't run that, but i figured let me try one more thing which so far is working for the last hour or 2. I changed it from H.264 to H.265 and also dropped it from 30 FPS to 15 FPS, and added in sub streams. Only thing i can't figure out is the key frame settings

not the switch or the outlet. I hooked up one of the cameras to a POE adapter and used a different outlet. still getting the same results. Think i'm just going to re-install BI

nothing was changed, but a few days ago i had to turn off a few breakers to find a bad outlet on a different breaker. ended up powering down basically everything. maybe that surge did something do these devices.

something interesting I just noticed when using VLC The 2 cameras that are attached to my POE switch flicker really fast, but not with a green screen. it's a quick flash. wonder if that's causing it, and if it is, could it be the POE switch? Only thing that would make no sense is the doorbell...

Just checked. Last update was 3/20, and the system was still fine then. I'm also on windows 11 if that helps any

Yes I did. does that green color in BI, but not on any of the GUIs

any other ideas? I tried frame rate changing too. that did nothing.

just the camera feeds. machine runs perfectly otherwise. My son can play games on it with no issues, but he is using the external GPU.

It's an Intel i9-12900K that has a 3080Ti, but I am using the built in GPU thats on the CPU. It's the Intel 770

Don't think it can be a power issue as they are powered from different locations. One is a POE switch, the other is a doorbell and the last is directly plugged into the wall. on the status page they are pretty much stating the same. they move .01-.03 on the FPS. KEY almost never moves, and...

still doing the same thing, and its not like it's on the same make/model cameras, it's on all of them(i have 5)

Nothing was updated on the system or blue Iris I just fully shut down hardware acceleration. i had it set to Intel only from Intel+VPP I'm using H264 rebooted, and lets see what happens.

Over the last 3 days i am getting this odd scrambled green screen image on all of my cameras. It's random when it happens, but happens constantly. At first i thought it was the Intel VPP, so i turned that off, but still does it Anyone else ever see this?