Search results

The cameras are on a separate VLAN (the Windows computer has a NIC also on that VLAN). This setup has been working fine for a year and a half before it just stopped working properly maybe a month or so ago. I actually just discovered that I can get it mostly stable if I disable the substreams...

I haven't tried different switch ports, but logging into the switch it doesn't show any errors on those ports (Ubiquiti EdgeSwitch-48-500W). I haven't tried removing and re-adding the cameras yet. I've always had the 404 issue with the cameras when I make a change, but previously it would sort...

I've started having a problem recently where 2 of my 3 Dahua IPC-HDBW4231F-E2-M/M12 cameras report "RTSP: 404 Not Found" in Blue Iris. Generally Blue Iris will be able to pull one of the cameras up, and the other other almost immediately goes offline. They'll both stay offline for 5 minutes or...

Nope, that brings it to the PTZ Home location (basically coordinates 0,0).

No, that's "stop". So I assume it's for if you have it set to constantly move, it would stop it from moving.

I have a Dahua PTZ that supports absolute PTZ (SD59230U-HNI), however I can't seem to get the button for it to show up in BI 5. It looks like BI 4 had this as an icon with crosshairs: But BI 5 has no such icon. I have tried setting up the camera as Amcrest/Dahua and as ONVIF (OXML), but...

Any word on the new firmware from @EMPIRETECANDY for these? It seems Dahua released 2.622.0000000.32.R.190827 in March. Also curious about what changed.

It might just be the thing that puts the link over the limit. Or maybe that camera uses a higher bitrate, or it's more sensitive to link jitter and packet loss. I just know that powerline causes issues for a lot of people. But as usaf_pride said, maybe try unplugging some of the other cameras...

Powerline adapter is probably your issue. They should be avoided whenever possible, because they have unpredictable latency spikes and packet loss. In some cases a dedicated wifi link might even be better. Is MOCA a possibility instead? To confirm that's the issue, I'd try moving the Blue Iris...

1st stream can be any fps <= 25, h265 or h264, and 1080p (1920x1080)/ 1.3M (1280x960) / 720p (1280x720). Substream can be any fps <= 25, h265/h264/mjpeg, and d1 (704 x 576) / cif (352 x 288).

Interestingly, it seems that Snapshots for the IVS trigger occur. I disabled Snapshots for motion detection on both cameras, and set my IVS rules to take snapshots. The "disabled" camera correctly captures Snapshots when people or cars enter the IVS zone. It just won't record video.

2.622.0000000.31.R using IE on a Windows 10 VM as well. I can add tripwire or intrusions to both for IVS, and they both show up in the settings. However only one is active at a time. Only the camera that is selected in Smart Plan shows the overlay in Live View, and that's the only camera that...

Yes, I hit save. After doing that, in the live view you can see that the IVS overlays for the unselected camera are gone, and IVS stops triggering for it. IVS only works on the selected camera/channel. I'm not sure if this is a hardware limitation, or just a bug in the UI. Hopefully it's just...

This is on the individual camera. I'm referring to this screen. You can only select one of the two cameras to enable Smart Plan, and IVS only works on the camera with Smart Plan enabled. Changing to the other channel / camera disables it on the unselected one.

Hmm. I see that he posted a new firmware in October, and that's the version that my cameras are using. I can switch IVS to either Channel 1 or Channel 2, but not both. Maybe there is a newer firmware out now? @EMPIRETECANDY said that they tend to release them every 3-4 months.

Anyone else having issues with IVS? It seems that I can only configure it on 1 of the two cameras. I can switch the camera that it uses by selecting a different channel in smart plan. Is there really no way to have it do both cameras?

Hi Andy. Can I please get a quote for: 1 x SD59230U-HNI 2 x IPC-HDBW4231F-E2-M/M12 and either 1 IPC-HDW5231R-ZE or another IPC-HDBW4231F-E2-M/M12 Shipped to Pittsburgh, Pennsylvania USA (15212) Thanks.