Search results

I am getting (3) mobile notifications every time a trip wire event happens. Sometimes the object tripping the wire is delayed and I cannot see the object in photo. I have to use the playback to see what happened. Anyone else dealing with this? [NVR] NVR5216-16P-4KS2E [FIRMWARE]

My IVS TripWire sends 3 messages every time it trips. grrr.......

Circling back around here on this thread I started a few months back. @fenderman called it. I just wanted to report back. It was my fault with a bad crimp on that wire causing the camera to drop after a few days. It just really threw me off since it would work for a number of days. Wanna say...

Yeah my push notifications send three notifications every cross line trigger occurrence. Annoying.

interesting. I know its Interesting...

Good idea.

Yes I’m plugging directly into the switch to diagnose. When I recycle the power on the switch all the cameras worked for a few days until I walked into the office this morning. When the camera that is giving me issues is online i can access it directly via its IP and configure it via the web...

T568B Copper Less than 75 feet Ummmmm

@fenderman @EMPIRETECANDY well looks like the issue came back even with a 120W switch. Could it be the camera? It is the exact same camera every time.

One thing is for sure. For the cost this hardware is buggy and almost more pain than it’s worth

Where is that link to the v 4.0.1 again ?

[NVR] NVR5216-16P-4KS2E [CAMERAS] Cameras updated to V2.800.0000000.0.R I'm receiving three push notification to my mobile device on ever tripwire occurrence with this firmware. Do I need to downgrade this firmware? Can I downgrade the firmware now that I have updated the firmware on all my...

This was a extra switch I had laying around that I used as a test switch for my issue. I’ve had multiple switches tested in my scenario with the same issue. I have a managed switch because I have multiple VLAN on my network.

it’s on the latest release 2.40(AAHI.2)C0

Yes I have monitored the devices and all stay well under 5 watts

Thanks. Yes it was set correctly in the web admin. The first go around you got me because I defaulted it and forgot to change it back. Any ideas what else could be causing that ? Bitrate or another camera setting ?

@TL1096r I have used the Zyxel GS1900-8HP for years now with no issues and with many different PoE devices. Its a good switch for $100 and Zyxel support has been really good. (Again this all depends on what you needs are for PoE so double check the switch has enough power for your situation)...

Are you saying the cameras or switch is configured incorrectly? What am I doing wrong?

@bp2008 @fenderman Thanks for the responses Update: I replaced the switch with a 120W Switch and have not had a issue since. Strange that 5 cameras could not be handled on a 70W switch.

192.1.1.51 is just being used a the example... all cams are on the 192.168.1.0 network...

Could be... yes T568B. AWG 24 Copper CAT5E OUTDOOR DIRECT BURIAL SHIELDED STP GEL FILLED DATA CABLE 24 AWG Solid Bare Copper Direct Burial Shielded Gel Filled

@fenderman thanks again for the help! I have another issue maybe you have come across @EMPIRETECANDY Camera D2 192.1.1.51 randomly goes offline giving the “Can Not Find the Network Host” after being online and working for a number of hours. If I go reset the switch it works for a few hours...

Good call you were right. Thanks

I’m almost positive it’s on consumption but I’ll double check tomorrow to confirm

I have 5 cameras plugged into a Zyxel GS1900-8HP switch (192.1.1.50 - 54) and for some reason only 4 cameras will power on even if I change in and out ports and cameras that are plugged in the switch. I have tried another switch with the same thing happening. I got my cameras from Andy and...

Looks like getting my firmware from Andy since I bought from him is what I need to do... Thanks should have looked there first before posting but I'm new around here :-) I haven't updated yet but I'll report back once I have time to do so... Thanks [NVR5216-16P-4KS2E Update] Big update...

Thanks yeah my NVR is behind a firewall and on its own VLAN

Okay looks like I need to go through and locate firmware updates for all the cameras. Any help on the firmware for these models would be appreciated IPC-HDW4431EM-ASE IPC-HDW5231R-ZE IPC-B5442E-ZE IPC-HFW5231E-Z12E

I don't think that is the problem here. However I think its better to have the NVR assign IPs to the cameras because then you can directly access the cameras via a port using the NVRs IP. camera1 -->> 192.168.1.1:1080 for example

If you do what you are suggesting here you could have cameras in two different subnets if you don't change the settings plus this would expose the IP cams to other devices on the network and internet. I thought the idea was to have all the cameras behind the NVR switch. right?