Search results

We are using „Set Custom Layout“ function for PanoVu camera as described in this video . With new recorder DS-7616NI-I2/16P this function is missing. Is anyone knows how to correctly integrate PanoVu camera in new recorder?

Thanks. I also have installed both versions and do not see any difference. My supplier from China telling that they use same hardware. May be just pre-installed firmware which could be anyway replaced after first update. I want to just to be sure that /EU version is 100% compatible with English...

I have an order with DS-KD8003-IME1/EU and DS-KH6320-WTE1/EU. Is anybody knows the difference with models without /EU, i.e. DS-KD8003-IME1 and DS-KH6320-WTE1?

Now one camera is in another location. Still few reboots during night (picture). Camera has SD-card and ANR activated - there are not network faults.

Interesting. It looks that I have to send all 33 pcs buck to seller since the cameras working perfect in the same network.

Thanks, but it not a case we have 33 pcs of such cameras in the networks - all of them making reboot. We have also many 2347G1 in the same network - no-one reboots. In our office we use gold-plated Cat7 cables, problem is really not in cables/connectors.

Cables are Ok, we use different cables for tests and for operation. I have connected camera to 12V power (instead of 48V PoE) and results much more stable, picture attached. May the problem in the internal power convertor? How possible to check it?

We have fault with all xx cameras. Some of them came with FW 5.7.1, other with 5.7.2. Now I have installed latest 5.7.3 - same problem with unregular reboot. Also we used standard configuration as well as with reduced resolution, bitrate etc. It looks that problem with hardware. May only with...

We have installed many dozens of DS-2CD2346G2-I and DS-2CD2347G1-LU in the same network. 2347G1 works perfect (Pic2), but all (dozens !) DS-2CD2346G2-I make Reboot many times per day, sometimes per hour (Pic3). Latest Firware is installed 5.7.3 (Pic3). Please help in case you had the same problem.

System is like that: Villa door station HIKVISION DS-KV8413-WME1(B), FW V2.2.53_210907 4 Indoor stations HIKVISION DS-KH8350-TE1, FW V2.1.32_210926 Same PoE Switch for all 5 devices After installation everything works perfectly, but after some time something went wrong: I could watch from...

Do you mean to indoor station like DS-KH8350-WTE1 ? It has 8 alarm inputs and 2 alarm outputs. I have programmed inputs, may be you can program outputs.

My Swiss-German is not Ok? :)

Wie’d gsehsch, het no niemert g’antwortet. Sieht so uus, dasses für mi ringer wär, e Concierge z’finde ;)

I got a HIKVISION DS-2CD2386G2-ISU/SL camera with a build-in speaker. Frimware 5.5.160 But the output volume of this speaker cannot be changed from Web-interface: Configuration/Video-Audio/Audio. Any idea how to do it? Thanks

Please advice where to buy HIKVISION 20 pins connector for intercom panels? Is it RVV type? Picture is attached.

Other icons (lift & alarms) are easy to hide, but concierge icon stay always. P.S. I have 6320 with FW 2.1.10 200713 where this icon is not present.

I found a solution: 1. Activate alarms 2. Configure Alarm1 as Doorbell with NO 3. De-activate alams (remove from the screen)

We have a house with 4 apartments (3 floors). Outdoor module will be DS-KV8413-WME1. Indoor modules will be 4x DS-KH8350-TE1 (or similar). But we should have another door bell button next to each door. In order to allow rings (not knocking) from the persons who stay behind to the apartment...

With new firmware DS-KV8113-WME1 could works in stand-along mode without indoor panel. Good feature, but it in works only with PoE connection. With wireless connection doorbells works direct access and with NVR access, but platform access is offline. Of course, I have checked gateway and DNS...

Yes, this model is discontinued. In fact it is the only model with 4K and WiFi. After first purchase I got 10% discount from iCCTV shop , you will probably get it too. But 60 bucks seems too pricey, I got it for $104 with discount :)

1 pc is available under DS-2CD2483G0-IW

Very good 4K camera ! Real time/size sample:

10-20 seconds camera is available in network then reset

I have legally purchased DS-2CD2347G1-LU and tried to upgrade it from V5.6.2 to V5.6.3. During upgrade my computer lost connection and can be the upgrade process was not properly finished. After upgrade the camera is restated every 1.25 min: 1. Make flash from write LED 2. Trying to get IP...

My client is requested for EasyIP selection table. Especially for recent models 2.0+, 3.0 and 4.0. Unfortunately I cannot find any official chart from HIKVISION. Videos and brochures have really low information. It will be nice if you can help me, thanks.

You are right, we need this panel also with custom features. May be they would implement in the future firmware more features, web-interface, ssh access. Also SIP protocols shall be improved.

I'm doubt that it is possible. There are no menu for that. Telnet/SSH access for KH8350 is also closed.

Yes, there are different models: DS-KD8003-IME1 - PoE https://www.hikvision.com/ph/Products/Video-Intercom/Door-Station/DS-KD8003-IME DS-KD8003-IME2 - 2 wire https://www.hikvision.com/ph/Products/Video-Intercom/2-Wire-IP-Video-Intercom/DS-KD8003-IMW2 Yes, 8003 could be used without indoor...

Really ? DS-KAD606-P POE switch is Intercom V1, 24V But DS-KD8003-IME1 with a DS-KH6320-TE1 is V2, i.e. standard IEEE 802.3af/at, 48V

I don't know cheaper alternative to provide PoE 802.3af, quality is also excellent. I am personally always using PoE injectors instead of 12V AC/DC adapters for cameras.