Search results

This guy just adding a correct network getaway to have remote access from Ivms4500: www.ipcamtalk.com/showthread.php/4818-Issue-on-remote-viewing-DS-2CD2432F-IW/page2?highlight=ivms4500

Re: HIKVISION NVR DS-7616N-E2/8P 3.1.0 us firmware Virtual-Host and Smart-Event featu @voltron81 When escape from seller's 3.0.8 the NVR will expose Chinese origin, only risk, but have to be confirmed, future compatibility with camera. But until now all my 3 models Chinese cameras with 5.2.5...

This is a cool feature to manage the NVR (or IP Camera) from internet when away . -1 76xxN-E2 running 3.3.4 firmware -2 First Create certificate -3 Enable certificate -4 Forward this https port on your home router -5 Allow certificate from your browser This is a...

Sorry for wrong direction, vga-gui only provide information about poe port in 3.3.4.

Have you tried by vga-gui , there are a menu to manage Poe switch, power it on/off?

NI, "I" mean international ? Euro site only carry NI model.

Re: HIKVISION NVR DS-7616N-E2/8P 3.1.0 us firmware Virtual-Host and Smart-Event featu -No virtual host in 3.3.2 -1x to 8x by webgui or vga

Re: HIKVISION NVR DS-7616N-E2/8P 3.1.0 us firmware Virtual-Host and Smart-Event featu + features 3.1.0 : - virtual host - VCA for Smart Event like line crossing (if camera allow) with email snap-shot Playback 2x ...8x ok. No events marked on continuously record, even in 3.3.4 version, but...

Re: HIKVISION NVR DS-7616N-E2/8P 3.1.0 us firmware Virtual-Host and Smart-Event featu Hi, @alastairstevenson In fact, because of less reliability of basic motion detection, i had never tested this feature on 76xxN-E2 3.3.4. And now, after further testing email's snaps shots is working in...

Re: HIKVISION NVR DS-7616N-E2/8P 3.1.0 us firmware Virtual-Host and Smart-Event featu @voltron81 If you are satisfied with 3.0.8, better keep it. It's not my case, i need smarts events like line crossing, 3.0.8 lack those features. Anyway 3.0.8 is useless for me because standard motion...

Thanks @alastairstevenson, Absolutely with USB-serialTTL, power is provided by USB connector from PC side. If RS232-serialTTL is in use, Ic of converter need to be power, mostly come from target device side (NVR here).

My NVR is chinese-origine 7616N-E2/8P, until now I didn't find any Hikvision firmware download server specifically for this model. May be some one had figure out where to find such this. So thank wzhick for hicktools, have try euro site firmware for 7616NI-E2 (note N vs NI), work well except...

Re: HIKVISION NVR DS-7616N-E2/8P 3.1.0 us firmware Virtual-Host and Smart-Event featu For Origine-Chinese NVR: Only web-gui "upgrade" from Multi language firmware to higher us or Chinese will maintain Multi language that include English. Also Multi to Multi is OK . Now you have to downgrade...

No +5V, mean better have USB-TTL converter than RS232-TTL right? Do you know pin R is what for?

@Frankosor Salut Frank, On board 4 pins serial connector usually had TX,RX,+5V, GND. It is possible to figure out +5V and GND with multimeter.

@JulesFW Here a ping from my android device to SMTP.gmail.com, if successful it's will show the router DNS is OK. I have the same NVR model and email is ok, try it with 3.3.2 firmware, it's lack telnet that allow using putty on PC to issue a ping from NVR. If you have Hikvision IP camera, why...

@JulesFW Base on your home router subnet: - Normally when NVR network has DHCP enable, a first preferred DNS will get a default value of 192.168.0.1. This way, it's the router itself that resolve the internet address of smpt.gmail.com. Or you can also setup manually preferred DNS to...

You mean that your home router default gateway is 192.168.0.100 ? If you didn't have intentionally set it up, it come by default 192.168.0.1. You can check it on your own computer: Run this command : ipconfig /all Just enter the right default getaway in the NVR network TCP/IP menu.

Absolutely right cheaper with extra TB HDD. But one may consider others benefits. It like was a replacement Mpeg2 by Mpeg4 (h264), a huge gain in term of bandwidth saving, is not in term of image quality. The benefit is to broadcast or record a highter resolution image at the same cost of...

Re: HIKVISION NVR DS-7616N-E2/8P 3.1.0 us firmware Virtual-Host and Smart-Event featu @alastairstevenson May be are there some matching trouble with my camera type and firmware, i have tested with two chinese model : - DS-2CD2132F-IS Firmware Version V5.2.5 build 141201 -...

Re: HIKVISION NVR DS-7616N-E2/8P 3.1.0 us firmware Virtual-Host and Smart-Event featu @Del Boy My DS-7616N-E2/8P at origine had 3.0.8. Firmware for DS-76xxNI-E2 work fine on 76xxN-E2 Chinese DS-78xxN-E2 3.3.4 build150616 is ok to. I use this DS-76xxNI-E1(E2)P_USA_Firmware_v3.1.0_150511 from...

@skeet25 Yes the Chinese only 78xx 3.3.4 is same build than 76xxNI-E2 euro, my is 76xxN-E2 Note: "NI-E2" vs "N-E2" No where to find specific 76xxN-E2 firmware.

Upgrading my NVR DS-7616N-E2/8P to 3.3.4 firmware. 7616N-E2 3.3.4 3.3.4 is very nice with a lot of features, specialy Smart-Event, but lacking snap-shot in email-alert. I found that Smart-Event, line-crossing or region-intrusion, from my camera is more reliable that classic motion...

@yop3bik Hi yop3bik, Just downgrad to 3.0.10 : -Must use 3.0.10 Multilanguage from euro site. -Change 3.0.10 language flag to 2 with hiktools -Downgrading to 3.0.10 using only Hikvision tftp server -Check that NVR is working after downgrade Every time change euro or us firmware language...

@whoslooking Hi Whoslooking, On my 7616N-E2/8P 3.3.4 is OK There are trick to get 3.3.4 work : For some reason upgrading euro firmware 3.3.2 to 3.3.4 not working. But from Multilanguage firmware to chinese only is working. - First put the NVR in 3.3.2 (or lower) multilanguage from euro...

Yes wzhik, you are absolutely right, it's a kind of "corrupt firmware" or "incompatible code". Important is device still can be recover. I would like to thank you for useful and friendly helpful contribution, I had learn a lot from.

Congratulations good job. Must appreciates: there is a thank button if you find the post helpful.after

Your NVR is brick. Recover: Using only Hikvision tftp server tool to recover by dowgrading to 3.3.2 Hikvision tftp explain here: http://www.hikvision.com/UploadFile/File/201433116851896.pdf Download from here http://www.hikvision.com/europe/down...re.asp?id=1336 Usefuls informations read...

I do have an usual timeout for 30 minutes after a sixth trie - anyway the new password that had been created isn't recognise.

@CoreyX64 Hi Corey, From experience tftpserv recovery on my NVR today, I get the same failure message here : [2015-08-08 22:41:38] TFTP server[192.0.0.128] initialized [2015-08-08 22:42:39] Connect client[192.168.9.216] success [2015-08-08 22:42:39] Open...