Search results

After further investigation, this is not a large amount of virtual memory. I am just going to leave things alone. I think a SSD for my boot drive could help.

Hello, I am getting an error that the memory pages/sec is too high on my BI machine. The PC is dedicated to BI and I am using Zabbix to monitor my statistics. My CPU runs about 25-35% and I have 16GB of RAM that runs about 20%, to 30% at the most. So... why would my system be looking to use...

Oh boy, this is getting involved. Sounds like there is not much I can do with my Reolink cameras. The garage & basement cameras however are FLIR models. They must be doing a similar thing cause the summaries are the same as the Reolink. I did see a 'GOV' setting on those cameras however.

Okay, you have my attention. I am not a camera guru and I am learning more each time I use Blue Iris. The system is working for me with the security coverage I have. I can't speak to your question about iframes. For my learning purposes: the cameras are set for 15fps and that is what shows...

Thanks for your opinion. HA does in fact work on the Reolink cameras. Without the HA my CPU will run at near 90%. I have been running this system for over two years and never had problems with "crappy video".

Hello, I have a Reolink RLC-420 that has the same problem where you cannot enable hardware decode. It worked fine in the past, now with the latest BI version 5.3.9.17 it does not. I have tried ONVIF, Reolink (standard), Reolink (old firmware) drivers. With substreams and without. It is not...

Hello, I have a Vera home automation controller hub that I would like to pass a live stream from my Blue Iris cameras. If I use http://192.168.0.5:8080/mjpg/porch/video.mjpg?user=Vera I thought it might login to my web portal? From my PC on my local network If I just use...

I installed the new Intel dual port NIC I bought with no changes to the problem. I fixed it by changing my computer name. It had a hyphenated name previously. Win10-Server-Basement Now it is just Win10Server. After I rebooted and had it as the hostname the multiple subnets showed up in...

I disabled the webserver, rebooted and I still show only the one IP address available in the dropdown. I changed the camera subnet to 192.168.47.5 and rebooted and then that IP subnet shows in the dropdown and nothing else. I still think there is an underlying windows hardware or gremlin...

Nope, after reboot nothing grabbed it. Only one NIC shows in the dropdown also.

I have an Intel dual port NIC on order from eBay

Yup, that is the setup I have. I don't know if maybe it is the network card. I am going to get a different one.

I tried that, it did not make any difference.

After much trial and error, I think this is a hardware problem. If I disable the two network ports on my additional NIC and just use the onboard motherboard NIC everything works fine after a reboot. If I enable the additional NIC and reboot, the Webserver does not work. Then if I go in and...

Sorry, I should have put this in the first message:

I am unable to browse the Webserver on my local LAN because it is not bound to my primary network card interface. I have multiple network cards. My primary internet connected subnet is 192.168.0.5 My second subnet is for POE cameras on a second NIC & switch at 192.168.1.1 In the Webserver...

I am setting up a new BI machine. As I customize BI & camera settings is there a way to take a snapshot so if I goof something up I can just revert the changes? Kind of like a virtual machine snapshot? I saw the BI Update Manager, does that work in that manner or is it just for software updates?

I have an i7-3770 3.40Ghz and a Xeon E5-2695V2 2.40GHz I think I will just do the i7 as it has the Quick Sync capability. The Xeon I have is more for VMware.

I am putting a machine together and I know Blue Iris is CPU intensive. Will QuickSync on an i7 allow better performance than a multicore Xeon?

So sorry, I am a brand new user and I am attempting to add a new camera to Blue Iris 5.0.2.5 version. I just installed the software and this is the first camera I am trying to add to my Blue Iris. I ran the inspect option and I have a video stream! :-) I did not even realize that button was...

Hello, I have a FLIR camera model CM-6206-H1-I that I am unable to add. There is no camera definition listed in the dropdown for FLIR. It is made by Quasar I believe and sometimes called Ariel and I do not see those in the dropdown either. I am pretty sure it does ONVIF so I used that to add...

How do I change my display name below my avatar? I looked and looked and cannot find any preferences to allow this.

Hello All, I just purchased Blue Iris from this website. I evaluated Zoneminder as I use Linux for other things. Blue Iris seems straightforward and yet also offers more depth of configuration if you want it. I don't purchase many apps especially annual updates however, in this case it looks...