alarm i/o.

i have a Hikvision NVR DS-7608NXI-K1 , But it doesn't have an alarm out port , is it possible add any new additional alarm module into the NVR ?

Hi, I am having problem with push notifications to mobile phone, but only in the case of alarm input. My IP camera is an HikVision 2142-IWD and I am using a mobile app called "Home & Life Cam". Camera is connected via HikConnect (Cloud). More or less everything works well and for example motion...

I have an 8 port Blue Cherry card using hard wired cameras. The Blue cherry card claims to have GPIO and blue iris card claims to support alarms. Basically I'd like to have a couple PIR that will assist with triggering alarms for blue iris to pick up. But It doesn't seem that bluecherry...

I have a bunch of Hikvision cameras and want to get a Hikvision NVR. I need Alarm IO, but I don't need POE. I bought this NVR (NSN-616) from Nelly's and the specs are confusing: http://www.nellyssecurity.com/media/specsheets/hikvision/nvr/nsn-616.pdf It says the Alarm IO is optional. The one I...

Hello, i have an issues with an DS-2DF8223I-AEL dome camera. I have configure two alarm input, thera are configure NC from an PIR Sensor. If the contact open then the camera should move to an preset an stay for 15 seconds on this preset. After the 15 second’s the camera should move back to its...

First post... I have a few Hikvision cameras that have an alarm output. I would like to attach a strobe or LED that would simulate a camera flash. Does anyone know an easy way to do this? My issue is that when the alarm output is activated, the strobe or LED will stay illuminated until motion...

Has anyone figured out how to turn the Hikvision Alarm I/O output on and off manually, rather than exclusively being controlled by alarm conditions?