config

  1. haselnut

    Need to access cameras behind Dahua NVR

    Hi I have Dahua NVR DHI-NVR4108-8P-4KS2 (firmware V4.001.0000005.1) and 8 Dahua cameras connected to POE ports. NVR has an ip 192.168.1.108, cameras are on different subnet 10.1.1.X managed by the NVR. I am trying to control the LED's on my cameras programmatically instead of the cameras own...
    • haselnut
    • Thread
    • api config dahua forwarding nvr port
    • Replies: 32
    • Forum: Networking
  2. P

    Set network configuration of multiple IP cameras of different manufacturers

    Suppose I have 20 cameras of different manufacturers. Maybe some of them will start with a fixed IP address, maybe some other will try to get network configuration from a DHCP server and, if failed, will start with another fixed IP address. I know I could connect one camera at a time to a PC...
    • pozzugno
    • Thread
    • config config tool discovery network onvif setup
    • Replies: 0
    • Forum: Networking
  3. stevef22

    Help request config Dahua LPR.

    Hello I recently purchased a LPR ( IPC-LPR437B-IR ) from Andy. I have successfully initialized it and Im able to access it via web browser. I can view the Web GUI and modify camera settings. However I can not recall any saved plates etc. Its very frustrating. Tried IE, Chrome, PaleMoon, Old...
    • stevef22
    • Thread
    • config
    • Replies: 1
    • Forum: LPR
  4. amrogers3

    save failed for IVS on a IPC-HDBW5441F-AS-E2-3.6mm

    I installed this camera about 6 months ago and configured it with no problems. I went in today to change some IVS settings and I keep getting a "save failed" error. I also have a Dahua NVR, DHI-NVR608-32-4KS2, but I always program the cameras by directly accessing their IP address through a...
    • amrogers3
    • Thread
    • boobie cam config settings
    • Replies: 5
    • Forum: Dahua
  5. OzDrDj

    YCC 365 Cloud Cam - Static IP - Time Change - Config

    Hi All, I have been mucking around with Wifi cameras for years now, trying to get things just right. Finally i have found some WiFi cams that seem to work. Set up with the YCC365 app and able to view on iSpy pc software. I do have a couple of problems that I am hoping someone here may know the...
    • OzDrDj
    • Thread
    • config config tool ip address time adjust tuya ycc365
    • Replies: 7
    • Forum: IP Cameras
  6. Overcon

    Hikvision DS-2DE2A404IW - Presets

    Is there a way to use the presets you set in the Hikvision DS-2DE2A404IW? I set 7 presets that allow me to move the PZT around to different areas, but they don't work in BI 5, or at least I believe they are not working. When I use the web (UI3) interface and pull up the camera so it is the only...
    • Overcon
    • Thread
    • config control ds-2de2a404iw hikvision ptz
    • Replies: 2
    • Forum: Hikvision
  7. Lorenz

    IPC-HUM8431-E1 - Pinhole camera DH IPC-HUM8431-L4

    Goodmorning everyone! I hate to see cameras in the house so I bought this model which is practically invisible. Connecting it to the NVR the camera is displayed correctly but when I want to access it to configure it from the browser appear incomprehensible writings and I can not even access the...
    • Lorenz
    • Thread
    • config dahua pinhole poe camera
    • Replies: 3
    • Forum: Dahua
  8. Meir MaSe Miyara

    Mobile login: Unable to connect, user limit

    Hi guys. This is a new error i am getting, i went through all of BI config on the server and i am sure i am missing where i can fix this issue. Does anyone knows how i can fix this?
Top Bottom