q-see

  1. PowellSkier

    Q-See QCW4K1MC 4k Wi-Fi Security Camera

    I have two Q-see cube cameras that were updated to the 2.621.00QS000 0.R firmware version and the default password is no longer admin! Does anyone have any idea what the default password for this firmware version is? All attempts at initializing\adding\configuring these cameras with Dahua and...
  2. Sicklyhare

    Are Q-see cameras unusable now?

    I've got some Q-see cameras that I had forgotten about, wifi cameras (QCW2MPSL) I'm trying to figure out if there is anyway to use them still or if it's not possible anymore.
  3. N

    Q-See NVR (QC-8816) Change Password after Reset (or flash with Dahua firmware?)

    One of the many affected by the Q-See shutdown, however I was still generally happy with my NVR and had no problems with it until recently. I started having a camera that wasn't always displaying properly, tried to troubleshoot, eventually decided to factory reset the NVR. Fixed the problem, but...
  4. R

    Q-See Configuration

    I have a Q-See Wi-Fi HD Camera (model QCW4K1MCB) and would like to set it to a static IP. Q-See's app requires you to log in but since they are out of business that doesn't work. Reading some online manuals it should be possible to access the camera and its settings via a web portal by entering...
    • rfj
    • Thread
    • configuration q-see
    • Replies: 8
    • Forum: IP Cameras
  5. U

    Sporadic "Can not find the network host" for all cameras on QC826

    Hello, We have a (Dahua) Q-See QC826 NVR with 8x Q-See QCN8093B cameras. The system is not plugged into our home network, we just have it connected to the TV via HDMI as well as a USB mouse. Sporadically we have been having all video feeds drop out, and the only message shown on the screen is...
  6. R

    Q-See 4k Cube

    I purchased a Q-See 4k Cube camera and tried to add it to BI. I did enter the IP address and clicked on the discover button in BI. BI seemed to recognize it. I then added the camera to BI. I didn't get any error but the camera doesn't show up in the main window along with all the other cameras...
  7. J

    Q-See NVR can only connect to 3/4 cameras

    I bought an NVR setup with 4 cameras from Costco recently and I have been trying to set them up. I have all 4 cameras plugged into the power sockets but only 3 of them actually connect to my NVR. When I unplug 1 of them, the 4th camera suddenly connects. Why is this happening and is there any...
  8. ReviewG

    I think I'm missing something.

    I have slowly been ripping out all my old analog junk and switching over to POE IP Cams. Current setup is LTS Platinum 16port POE 4k NVR Q-See 3MP IP POE Varifocal Bullet Q-See 4MP IP POE Varifocal Dome Raytec Raymax RM50-50-POE Everything is working well. Now here is where I run into an...
    • ReviewG
    • Thread
    • dahua lts q-see raytec
    • Replies: 4
    • Forum: Dahua
  9. F

    Adding Qsee QTN8017B camera to Qsee QC8116 NVR

    I have 8 QFN 2023B cameras working good on a QC 8116 NVR. I added one QTN8017B camera using the settings: port 85, Onvif and password 123456 and it worked good until I rebooted the NVR. Now I cant get it to work. Tried 2 other cameras and the same. When I use the detect function it appears to...
    • Fred Murtz
    • Thread
    • q-see qc8116 qfn2023b qsee qtn8017b
    • Replies: 13
    • Forum: Dahua
Top Bottom