Hello,
For some, it might be a dumb question, but I want to be sure how to approach it. I have an in-house PoE switch. Some time ago, contractors broke the underground cable going to one of my Reolink cameras. They requested help from an external specialist, who rewired it. In short, he...
Hi,
I´m not really familiar with these sort of connectors, so i might not use the right expressions.
The RJ45 connetor piece of the outgoing cable of my Dahua is gone, see attached picture.
Is it possible to crimp another connector or keystone module, jack or whatever you might call those stuff...
EDITED BY FENDERMAN: THIS IS A SPAMMER FOR VCELINK. DONT USE THEM. CANNOT BE TRUSTED
I'm a beginner to network installation and I have learned from the that there are various RJ45 connectors.
There are pass through and non pass-through RJ45 connectors on the market and I don't know which to...
So,
I’m new to all of this, I am pretty tech savvy for the most part but I am stumped. I have a 8ch 1080p SANNCE NVR wireless system, came with 4 cameras paired to NVR, i was considering changing interface so I was changing the camera ip’s to my network’s gateway, well silly me conflicted the...
Hello guys,
So I had 4 cameras down after a rain storm(outdoor hikvision system)
1 camera- burnt out at rj45 jack in back of bullet camera- replaced jack and fixed
1 camera- no visible damage but replaced camera and all good
2- rj45 keystone jacks replaced and fixed issues
At the end of all...
Hey Guys, its been awhile, while reading over and through wiki and other threads I’m finally getting started for my install and wanted to ask a question concerning proper and durable cable runs with these ez pull through connectors. I have pulled one run so far and terminating cat 6 with rj45...
Hi guys,
Hoping you guys can help me find some answers. I've searched quite a few websites but still can't find a definitive answer. My LaView cameras came with these sort of ethernet cable connector cover... thing.
I am not actually 100% sure what they are called... which is why I can't seem...
(I had this in the wrong place so I copied/pasted it for a new thread)
Please help me connect my camera. My modem is 192.168.0.1, so I have a netgear router that's 192.168.1.1 and I hooked in to it....but I can not communicate with it. It powers up, night vision works.... I have no idea what I...
Hi All,
Water got inside the RJ45 socket and it fried the connections, I removed the outer casing so I could get a better view of the damage, it seems it has completely melted 2 of my connections
Anyone know what wires go to what pins? As you can see, i've got 2 blown connections, I can...
"Dog Chewed Up" the RJ-45 end to a LOREX LNB 3143-C Camera.
When I cut the unusable/untraceable connector off, there are 6 wires and I cannot get LOREX engineering to release the diagram so I can replace the RJ45 connector. Does anybody know which pins the six wires: Blue, Yellow, Orange, Gray...