vto
-
D
Dahua VTO2000a SIP issue: stops working every time few days after reinstallation
Hi My vto2000a and VTH worked for long time (with vto as SIP server), but recently I noticed that the VTH did not react anymore when someone pushed the VTO button at the door. The DMSS app still gets the signal, but that is P2P. I could not solve the issue so reset both VTO and VTH and...- Droefelken
- Thread
- dahua sip vth vto
- Replies: 0
- Forum: Dahua
-
S
Adding NVR/IPC to Dahua VTH
I have a standalone VTO & VTH all working fine on the same range as my router, how do you add the NVR IPC’s to the VTH considering the Dahua NVR has a different subnet of 10.1.1.X. Do the IPC’s need to be removed from the NVR switch and connected to a POE switch and set ipc network to the same...- Simonjames
- Thread
- dahua nvr vth vto
- Replies: 0
- Forum: Dahua
-
C
Which VTO & VTH will be better with Dahua camera HDW5442 ?
Hello everyone I have 2 dahua cameras (HDW5442TM-AS-LED) that I will install soon. So I did a long search about a good VTO & VTH that will perform well, and have the ability to show my cameras feed in the VTH. In future I will install a server to run BI or something else, but it is VTH only for... -
C
External Siren to Dahua KTP02 - VTH2421FW
I have 2 wires siren I would like to add to VTH2421FW. I did the following wiring: COM ➡️ DC +12V NO ➡️ Siren DC -12V ➡️ Siren However, if door is open for certain time, internal beep on VTH is triggered and siren is not working. Any advice if this setup is correct? Is it possible to allow... -
D
WTS First Generation VTO and VTH's
For the back story, please see my post in the Doorbells Forum. I have a Dahua DHI-VTO1210C-X Apartment Outdoor Station (2-wire power) and three compatible Dahua VTH5221D indoor touchscreens (POE) for sale. All are unused (except for bench testing) and they even have the protective film. I would...- dmcIPCAM
- Thread
- doorbell vth vto
- Replies: 0
- Forum: Cameras, NVR / DVR's, hardware & more
-
D
Yet another VTO, Home Assistant, Kwikset, DahuaVTO2MQTT discussion
Apologies if this has been covered before - I did scan other DahuaVTO2MQTT posts... We have Kwikset 916 Z-wave deadbolt locks that are managed by Home Assistant. We also have a Dahua VTO2311R-WP doorbell and three VTH2621GW-WP monitors. There are numerous times when a friend rings the front... -
DAHUA VTO2202F-P Snapshot URL Error 500
Hello, everyone, until recently the snapshot URL http://xxx.xxx.xxx.xxx/cgi-bin/snapshot.cgi worked for my DAHUA VTO2202F-P. Ever since I connected a DAHUA NVR (recorder) to the VTO, it no longer works and I get an Error 500. The NVR is no longer connected to the VTO. Does anyone have an idea... -
gDMSS Plus app - cannot store state, cannot log in or Register
So.. I have a VTO2211G-WP, which is set up all working fine - but the Android app is really not working too well. I have tried to register within the app, get to the step "Acquire Verification Code" - and the resulting email has no code in it at all. It just says: Ahh - I'm already in the... -
Dahua videointercom - VTO without VTH for 6 apartments (each aprtmnt with smartphone DMSS)
Hi guys, Quick question here. I know this is not an IP cam question, but hopefully you can help. We're 6 apartments in an old building, looking to install on the fence 1 x Dahua VTO6221E-P, but we do NOT want any wires inside the building for internal intercoms (so not VTHs). Is it possible to... -
U
Need help with VTO2202f-p Dahua video intercom
Hi guys, I have bought the vto2202f-p Dahua intercom. I have initialized and configured it by connecting it directly to the computer. I have also set the SIP and IP adress to be compatible with my LAN network (192.168.0.x). It works fine. However, after I connected the vto2202f-p to the switch... -
M
Receive video call from VTO1220 or VTO6210
Hello, Could you please help me ? How to communicate with "VTO1220A and VTO6210"? I will use them with raspberry pi and flutter (android) application. for VTO6210 I need to receive a door bill ring, answer it, talk a video call for VTO1220 I need to receive a call by room number, answer it...- MohamedHusseinAhmed
- Thread
- dahua vto
- Replies: 0
- Forum: Home Automation
-
door lock problem
So i have the VTO3211D-P2 and the VTH2421FB-P and somehow i can't unlock the door from the vth but i can unlock it with my phone with easyviewer pro. Any solutions? in the unlock logs i get the card unlock fail. -
Dahua VTO/VTH group call issue
I am having an issue with Dahua doorbell in VTO and dual VTH setup. It was already set up and working, until I decided I wanted to upgrade to the latest firmware, because I was bored ( I know, upgrading something with no reason while it is working, it is asking for trouble, and I got trouble)...- stavros54cy
- Thread
- dahua dahua vth1510ch group call sip vth vto vto2101
- Replies: 10
- Forum: Doorbells
-
M
VTO2211G-WP + VTH5341G-W 'network abnormal video connect timeout' HELP
Hi all, I own a VTO2211G-WP + VTH5341G-W but can't make it work and would like some advice. It is set up as one VTO and one VTH with VTO acting as SIP server. I can access VTO live view trough the VTH. But once I try to call the VTH from the VTO I get a black screen with the audio (only one... -
T
VTO emulator for VTH
Hi, Is there an option to emulate call from VTO to VTH? I need to build combined intercom (old analog with new) The idea is making board with embedded processor connected to LAN and have inputs for buttons (every apartment) . If you press the button then the VTH will ring and will show RTSP... -
VTO VTO3211D-P2: When I pushing the button door, I am getting: "the number you dialed does not exist"
Hi, when I pushing the button door in the VTO, I am getting: "the number you dialed does not exist". What should I configure? Another issue, in the web service I see only 1 facade layout while I have 2. Thanks! -
How to integrate Dahua intercom SIP version to other SIP servers.
Hi I am using VTH1550CH & VTO3211D-P2. both of them upgraded with SIP firmware successfully. I could successfully register my extensions in the SIP server(ZYCOO U20) :) , but can not make calls :(. I think it's codec problem , although I've already enabled the video stream codec(H.264) and... -
Dahua VTO2000A doesn't work (light starts blinking, it disappeared from the network).
Hello, ipcamtalk members, this is the first time that I'm posting here. I have a Dahua VTO2000A outdoor station connected to Dahua VTH1550CH indoor monitor the VTO was working well I can view the outdoor camera from the monitor and the phone but just a 10 - 15min after, the VTO namespace light...- Eraking
- Thread
- dahua dahua camera dahua vto2000a doesn't work ip indoor monitor security camera survaillance camera villa outdoor station vth vto vto2000a
- Replies: 8
- Forum: Home Automation
-
M
VTS-5240B - Clear Config
Anyone know how to do a clear config on this device over RS232/Serial? Cant get in to settings menu after firmware upgrade. Firmware build date 20180117 Version 4.200. Has a an option for password recovery, using QR code, but server replies back that they cannot provide an unlock code. Thanks...
