A LOCO M-5 Linksys EA7500 No Connection

c hris527

Known around here
Joined
Oct 12, 2015
Messages
1,471
Reaction score
1,190
Location
NY
Strange issue for sure.
LOCO-M5 in bridge mode/AP Tested on 3 different routers and 2 switches AND WORKS FINE. No connectivity issue, static IP
Linksys EA7500 will NOT even see the LOCO..Period, no ping NADA, Does anybody know if I need to set or disable security feature on this router to make it see the loco.
I have already defaulted the router, put it on my network, works fine with all devices. If I plug the LOCO into a 10/100 switch, then the plug it into the router, it see's it.
I manually added it to the reserve by Mac and still no beans on the EA7500.
Works fine on my asus router and two older routers I have hanging around, so all connections and cables are good before you ask.
I had another M5 Loco and fired it up, same issue.


Here is a link from another form, my issue is pretty much the same issue.
Nanostation Loco 2 & Linksys EA7500 router | Ubiquiti Community
 

TonyR

IPCT Contributor
Joined
Jul 15, 2014
Messages
5,814
Reaction score
6,416
Location
Alabama
I read it all, even another link that was inside the info and arrived to the understanding that the Linksys EA7500 of that run or build is problematic...Doesn't seem to be a Ubiquiti issue, IMO....at least not from the info provided. :idk:
 

c hris527

Known around here
Joined
Oct 12, 2015
Messages
1,471
Reaction score
1,190
Location
NY
I read it all, even another link that was inside the info and arrived to the understanding that the Linksys EA7500 of that run or build is problematic...Doesn't seem to be a Ubiquiti issue, IMO....at least not from the info provided. :idk:
Thanks Tony,
I know I have way too much time into this, the hell of this is its a clients router,it all started as a simple Access Point Job on her farm, I pre configured the Nano and even tested it at her place with my laptop before installing it in her router, I was really not a happy camper when we had plenty of signal but no internet. I do believe its also a Linksys issue and not a Ubiquiti issue. Its a fairly new router according to her, I just might call linksys and see if they have any answers.
 

c hris527

Known around here
Joined
Oct 12, 2015
Messages
1,471
Reaction score
1,190
Location
NY
Thanks Tony,
I know I have way too much time into this, the hell of this is its a clients router,it all started as a simple Access Point Job on her farm, I pre configured the Nano and even tested it at her place with my laptop before installing it in her router, I was really not a happy camper when we had plenty of signal but no internet. I do believe its also a Linksys issue and not a Ubiquiti issue. Its a fairly new router according to her, I just might call linksys and see if they have any answers.
UPDATE: I did call Linksys, they were fairly decent, They had NO answer but I did let them know that there is a bug in the router, they are suppose to get the engineering department involved and see what they say, I did also let them know that the router is not doing what its suppose to do. They said give us 24 hours and they will get back to me.
 
Top