thomas-nau
n3wb
Dear all
I'm Thomas and new to the forum at least posting wise. I recently managed
to get Blue Iris working nicely at my home based on many of your postings.
Thanks for that!
Currently 4 Reolink 810A and 822A are in use and I'm quite happy with them
after applying the latest firmware. For each camera I utilize the low-res sub-stream
and the 4k main-stream. The sub-stream is setup for continuous 24x7 recording
direct to disk and the 4k gets added when a camera triggers.
Reading the sub stream guide my understanding is that the motion sensor
is used for motion detection while the AI deepstack confirmation my use
the 4k main stream if "use main stream if available" is checked in the camera setup.
Beside the two mentioned streams the Reolink also provides a so called balanced
stream. Quality of it is quite superior over the ordinary sub stream (clear stream
in Reolink wording) while the bitrate is still low enough to record 24x7 without
the need for way more storage. I also hope for improved motion detection at
night.
Unfortunately I was unable the get a setup working which uses the "balanced" one
plus the 4k stream. While the two lower-res ones are available via RTMP the 4k one
doesn't seem to be. Unfortunately I also couldn't find any information on how to
access the balanced one via RTSP which easily works for the other two.
So is there a way to make Blue Iris use RTMP to access the sub-stream and RTSP
for the main stream in a single camera configuration?
Thanks for your help any apologies for the long posting.
- Thomas
I'm Thomas and new to the forum at least posting wise. I recently managed
to get Blue Iris working nicely at my home based on many of your postings.
Thanks for that!
Currently 4 Reolink 810A and 822A are in use and I'm quite happy with them
after applying the latest firmware. For each camera I utilize the low-res sub-stream
and the 4k main-stream. The sub-stream is setup for continuous 24x7 recording
direct to disk and the 4k gets added when a camera triggers.
Reading the sub stream guide my understanding is that the motion sensor
is used for motion detection while the AI deepstack confirmation my use
the 4k main stream if "use main stream if available" is checked in the camera setup.
Beside the two mentioned streams the Reolink also provides a so called balanced
stream. Quality of it is quite superior over the ordinary sub stream (clear stream
in Reolink wording) while the bitrate is still low enough to record 24x7 without
the need for way more storage. I also hope for improved motion detection at
night.
Unfortunately I was unable the get a setup working which uses the "balanced" one
plus the 4k stream. While the two lower-res ones are available via RTMP the 4k one
doesn't seem to be. Unfortunately I also couldn't find any information on how to
access the balanced one via RTSP which easily works for the other two.
So is there a way to make Blue Iris use RTMP to access the sub-stream and RTSP
for the main stream in a single camera configuration?
Thanks for your help any apologies for the long posting.
- Thomas