Acusense late recordings using intrusion detection

radoslav

n3wb
Joined
Jan 24, 2018
Messages
16
Reaction score
1
I am exploring new acusense hikvision camera using NVR. On NVR I set region of detection, threshold 0s. Size of objects - max and min in camera menu. I tryed many settings but camera is recording after 1s of object is in detection region. What can be cause? I want to record since entering object to the detection area.
 

Attachments

dimo

n3wb
Joined
Apr 30, 2019
Messages
26
Reaction score
11
Location
world
I suppose it is a non Acusense Nvr. Is it set on Intrusion detection?
Does the Nvr running the last software update?
Log in directly to camera and make the settings there to see if that changes anything.
Check at the time synchronization between camera and NVR. Do they have the same time?
Put an SD card at the camera and let it "work" as a standalone. Will you "face" the same problem again?
 
Last edited:

John Williamson

Getting the hang of it
Joined
Apr 9, 2019
Messages
108
Reaction score
55
Location
UK
Try raising the threshold to 1 second and see what happens. Not sure why you would set a threshold to 0 seconds when using intrusion detection.
 
Top