Adding C6F0SoZ3N0PdL2 to NVR

[lecsogsm]

Hi,

Recently purchased the camera in subject (fw: V19.1.11.16.3-20200911) andhaving trouble to add it to my NVR (HikVision NVR7632K21).

ONVIF is enabled on camera, currently trying with admin/no password, port is set to 8000.

ONVIF device manager can connect to it with no issues, but the NVR keeps failing to connect.

Tried upgrading the firwmware to the latest one (according to ipcam.xin), which would be V19.1.11.15.19-20201230 which seems to be successful (IP camera upgrade success!), but the fw version doesn't change.

What am I missing here?

Many thanks

 

[alastairstevenson]

ONVIF is enabled on camera, currently trying with admin/no password, port is set to 8000.

ONVIF device manager can connect to it with no issues, but the NVR keeps failing to connect.

What does ODM show for the 'ONVIF port'?
This can be seen in the URI at the bottom of the Identification panel.
The port isn't always 80 or 8000, it can vary with the ONVIF implementation.

 

[lecsogsm]

What does ODM show for the 'ONVIF port'?
This can be seen in the URI at the bottom of the Identification panel.
The port isn't always 80 or 8000, it can vary with the ONVIF implementation.

That is also 8000

 

[lecsogsm]

Ok, it turned out, that NVR won't give out IP address on DHCP if it's set to ONVIF, now it's connected to the NVR with no issues