Advice need

[who.am.i]

Helo guys.

Im in a bit dilema. Have a client who wants to have cameras,but as usual no cable anywhere.
Cam 1,2,3 on detached garage,cam 4 on outdoor kitchen.

Power supply is no problem,wifi in garage but not in kitchen.so c1,2,3 and nvr wired on switch and wifi for c4 and somekind nanostation p2p for acessing router.

Thanx

Poslano z mojega EML-L29 z uporabo Tapatalk

 

[kjinxx2]

Hi there - take a browse through this thread

Point to Point Wireless Bridge Recomendations

I know, I know...don't use wireless for a camera setup. However I've got a 45m gap where running a cable is just impossible, so I will need to run a Point to Point Wireless bridge. Both Bridges will have POE capability fed from an NVR and a 110v POE adapter. Just looking for recommendations...

ipcamtalk.com

You'll likely use a point to point device to provide service to your kitchen cam which will then be wired to the point to point device (or switch).