Alert: AI: "Nothing found: 0%"

[PatrickR]

Good evening,

I set up BlueIris to treat alerts in two ways:
1.) Motion detection -> AI confirmation -> Alert
2.) External Trigger (MQTT) -> Alert (without AI confirmation)

It tried to achieve this by using the following settings:

• Trigger: Checked only Motion Sensor
• Motion Sensor: Checked Object detection, checked Use zones.
• Zones: I erased part of zone A to exclude a public area
• Alert: Checked all motion zones, all sources, "Add to the alerts list", "Confirm the alert with AI"
• Alert -> AI confirmation: To confirm: "person, car,...", To cancel: empty, Fire actions: Confirmed or AI timeout/error, "Apply to motion triggers only"

2.) Now seems to work correctly

My current problem is 1.):
It kinda works: It cancels some motion events but I still get regular alerts "AI: Nothing found: 0%" which should be eliminated by the AI confirmation. Attachment "Alert" shows one of those alerts, the attachment "Status Log" shows the according log entry ("Stellplatz") and one where a motion event without a positive AI result was correctly canceled ("Gartenhaus")

.

I also attached screenshots of my current settings.

Any help will be appreciated.

Patrick

 

[PatrickR]

Update:
To track down the problem, I disabled "Apply to motion triggers only". I am still getting AI Triggers (although I still don't know what causes it), but they are canceled afterwards by the AI confirmation:

31.12.2024 00:15:43.754    Stellplatz              Triggered: AI (Nothing found:0%)
31.12.2024 00:15:46.496    Stellplatz              AI: Alert canceled [occupied] 1266ms