Been using BI for several years with no real issues including with CodeProject AI. Recently I stopped getting confirmed alerts. I still get Alerts as I always have just no Confirmed Alerts returning from CPAI. When I run the clip through the AI Inspector it returns a high percentage recognition. I have attached photos of my current configuration but I have made many changes trying to fix this that the current configuration is not how it was setup. Any help would be greatly appreciated.
Alerts but no AI Check
- Thread starter battman2487
- Start date
I think you're suppose to turn off default object detection since you're using cpai. Also in the TO CONFIRM box you need to input the object you want cpai to confirm as a CONFIRMED ALERT. Try that?
I turned off Default Object Detection and set the To Confirm to "person". Now everything shows as cancelled with "nothing found". If I run the clip through AI Inspector it shows as 89% for a person.
you need to have "use custom models:" checked. I attached my settings, but you won't need to have "Gpu" checked more than likely. I also show one of my cameras settings below as well.
On the alerts view where u can see alerts do you have it set to CONFIRMED ALERTS, instead ofCANCELLED ALERTS.
I set mine up as Tinman suggested and it seems to be working. I then changed it so that To Confirm for the camera used the Persons, Vehicles, Wildlife from the main AI setup panel and it continues work. Tinman's is very similar to my original setup but obviously is different but not sure what was different. So thanks a bunch for the help.
