Hm, definitly not working for me. I tried the hard reset by holding down the button too. Perhaps the camera is broken? I guess will have to return/replace ...
Thanks for the help though. Un/pw is admin/admin, correct?
Thanks for the help though. Un/pw is admin/admin, correct?
this camera looks like a imou bullet 2c.. so it does not have a web interface.
if it is new, then u need to initialise it before you can use it.
if you have a dahua nvr u can use it to initialise it. else download the dahua software dmss? to initialise it first.
u can use the amcrest app or imou app as well .. since there is no web interface.. there is no way u can configure the camera except the steps suggested.
if it is new, then u need to initialise it before you can use it.
if you have a dahua nvr u can use it to initialise it. else download the dahua software dmss? to initialise it first.
u can use the amcrest app or imou app as well .. since there is no web interface.. there is no way u can configure the camera except the steps suggested.
Last edited:
I believe that cam is part of their "Smart Home" series, so perhaps this Amcrest support article will help, because you use their Smart Home app first to prep the cam for Blue Iris ==>> How To Setup an Amcrest Deterrent Camera In Blue Iris
GaryOkie
Pulling my weight
Yes, "ASH" (Amcrest SmartHome) devices need to be initially configured with the SH app as they lack a web UI. There is also an ASH22 specific Blue Iris guide here:
support.amcrest.com
How To Setup an Amcrest Smart Home Bullet Camera In Blue Iris (ASH22-W)
Amcrest Smart Home devices such as the Amcrest Bullet Camera can connect the Amcrest Smart Home app as well as to Blue Iris. This is possible by obtaining the IP address of your device from your ne...
Well whaddayaknow, that's the same link I provided in post #5 yesterday.Yes, "ASH" (Amcrest SmartHome) devices need to be initially configured with the SH app as they lack a web UI. There is also an ASH22 specific Blue Iris guide here:
How To Setup an Amcrest Smart Home Bullet Camera In Blue Iris (ASH22-W)
Amcrest Smart Home devices such as the Amcrest Bullet Camera can connect the Amcrest Smart Home app as well as to Blue Iris. This is possible by obtaining the IP address of your device from your ne...
GaryOkie
Pulling my weight
not the same link, but very close to the same info. There were in fact a few instructions specific to ASH22.Well whaddayaknow, that's the same link I provided in post #5 yesterday.
I tried to use the app but the app requires an internet connection when adding the camera. Outrageously insane privacy violation. Worthless camera.
Any suggestions on how to get around the requirement of using the app?
Any suggestions on good outdoor cameras that will not require an app and internet connection to configure?
Any suggestions on how to get around the requirement of using the app?
Any suggestions on good outdoor cameras that will not require an app and internet connection to configure?
Does it have to be wireless?
Wireless cams are not known for reliability.
Since you have to run power to it, why not consider a POE camera, either turret style (recommended) or bullet style?
Wireless cams are not known for reliability.
Since you have to run power to it, why not consider a POE camera, either turret style (recommended) or bullet style?
there is nothing wrong with this camera. it does not have a webpage because it is meant to be for the consumer market hence dahua has stripped it of the webpage . amcrest got it wholesale from dahua and thus everything is carried over.
once you initialise it, everything will work as expected.
don't be lazy..
Plug in your ash22 on a benchtop with an ethernet cable on the pigtail.
it will automatically get a ip address from your router's dhcp server.
download the dahua's configtool initialise it there if you dont want to connect it to the internet to use the app.
you can set the password and ip address this way.
You will be able to use it in BI at this stage..
once you have it setup, u can use it wirelessly as you wish.
once you initialise it, everything will work as expected.
don't be lazy..
Plug in your ash22 on a benchtop with an ethernet cable on the pigtail.
it will automatically get a ip address from your router's dhcp server.
download the dahua's configtool initialise it there if you dont want to connect it to the internet to use the app.
you can set the password and ip address this way.
You will be able to use it in BI at this stage..
once you have it setup, u can use it wirelessly as you wish.
@holiday, thank you very much - I was not aware of Dahua ConfigTool. I downloaded that and am able to initialize the camera and set a static IP with it (when connected to ethernet cable).
I cannot, however, set the wifi settings on the camera. The web interface is not available even when I initialize through Dahua ConfigTool. Any advice on how to do that?
I cannot, however, set the wifi settings on the camera. The web interface is not available even when I initialize through Dahua ConfigTool. Any advice on how to do that?
GaryOkie
Pulling my weight
The web UI in a SmartHome device is intentionally removed/disabled. However, there is a web server in the device that responds to the Amcrest/Dahua http CGI API for the most part. I don't think you can configure WiFi settings via this API, but I haven't attempted it. The only documented means of setting up the WiFi is via the SmartHome app.
If you have to use wifi between ASH22 and network router, and don't want to use the app, then you could try using ASH22 ethernet attached to a wifi bridge connected via wifi to your wifi router.
I have the same camera and you cannot log on web interface you need their amcrest surviellnce pro and IP config... Mycamera stays on for 5-10 minutes and disconnects, not found. It works on the IPAD but I don't want to use it on Ipad and I don't use apps on a cell phone.. Tech support is worthless and upper tech is just as bad. Stuck with this thing.
Last edited:
mromamcrest
IPCT Vendor
Good afternoon,
ASH 22 will not have a web UI as mentioned by others here. Thank you.
All ASH products must go through their initial setup through the ASH app. Any setting modification must also be done through the ASH app as well. Making any modifications away from the ASH app may damage the camera and essentially at the owner risk if they choose to and NOT recommended by Amcrest in any way.
Once the camera is initially set up as mentioned above other options do open up for Live view purposes only.
Below I will provide several articles on the options that do open up after the initial setup is completed along with a link to articles specifically for the ASH 22
ASH22:
support.amcrest.com
Blue Iris:
support.amcrest.com
RTSP on VLC:
support.amcrest.com
ASP ( Amcrest Surveillance Pro):
support.amcrest.com
AVP (Amcrest View Pro):
support.amcrest.com
ASH 22 will not have a web UI as mentioned by others here. Thank you.
All ASH products must go through their initial setup through the ASH app. Any setting modification must also be done through the ASH app as well. Making any modifications away from the ASH app may damage the camera and essentially at the owner risk if they choose to and NOT recommended by Amcrest in any way.
Once the camera is initially set up as mentioned above other options do open up for Live view purposes only.
Below I will provide several articles on the options that do open up after the initial setup is completed along with a link to articles specifically for the ASH 22
ASH22:
ASH22-W – Amcrest
Blue Iris:
How To Setup an Amcrest Smart Home Bullet Camera In Blue Iris (ASH22-W)
Amcrest Smart Home devices such as the Amcrest Bullet Camera can connect the Amcrest Smart Home app as well as to Blue Iris. This is possible by obtaining the IP address of your device from your ne...
RTSP on VLC:
How To Setup On VLC Media Player Using RTSP (ASH22-W)
For more information how to setup your device on VLC Media Player using RTSP, please refer to the information provided below. Please note, the instructions provided in this article are for streamin...
ASP ( Amcrest Surveillance Pro):
How To Add Your Amcrest Smart Home Bullet Camera Into Amcrest Surveillance Pro (ASH22-W)
How To Add Your Amcrest Smart Home Bullet Camera Into Amcrest Surveillance Pro (ASH22-W) Amcrest Smart Home devices, such as the ASH22-W camera, can be added to Amcrest Surveillance Pro software. ...
AVP (Amcrest View Pro):
Using Amcrest Smart Home Products with Amcrest View Pro
Amcrest Smart Home devices such as deterrent cameras, doorbells, or other related Amcrest Smart Home devices, excluding battery cameras, are capable of connecting to both the Amcrest Smart Home app...