Amcrest ip2m-841 2-way audio

D

dohat leku

Getting the hang of it
May 19, 2018
344
36
usa
Guys - I saw some old threads on this but they had no conclusion. Has anybody gotten 2-way audio to work through the blue iris mobile app?

Thx
 
Mine works. You clicked the speaker icon on the app and mic and it turns green? Are both not working, or just one of them? You have audio enabled in BI as well, correct?
 
I can certainly hear live audio from the camera and the green speak icon stays on my mobile app. I just can't talk. When I click on the mic button, the button turns green and stays green but nobody can hear me at the camera end

1602075959053.png
 
What did you register the camera as in the video settings dropdown menu? I had to change mine to some Dahua model to get the audio and ptz working properly.
 
  • Like
Reactions: TonyR
Also, I think there is a main setting in the BI settings to enable microphone input. Not 100 percent sure on that, but check the main blue iris settings, not just the settings for each individual camera.
 
yes that's configured correct too. Even using the mic button on the blue iris console doesn't work. I am beginning to think something needs to be checked at the amcrest camera end in settings. Does anybody know if any setting needs to be enabled for mic to work?

1602077584273.png
 
Jessie.slimer said:
What did you register the camera as in the video settings dropdown menu? I had to change mine to some Dahua model to get the audio and ptz working properly.
Click to expand...
Yep, my IP2M-841 two-way audio works in the BI app OK and I have cam type as "Dahua" & "Main Stream RTSP"
 
  • Like
Reactions: Jessie.slimer
dohat leku said:
I am beginning to think something needs to be checked at the amcrest camera end in settings. Does anybody know if any setting needs to be enabled for mic to work?
Click to expand...
All I see is 'Speaker Volume" in the cam under "Camera" ==>> "Audio"; the rest appears to be associated with the mic in the cam.
 
dohat leku said:
So it's working now but the sound is very garbled. Any way to change that?
Click to expand...
Under "Setup" ==>> "Camera" ==>> "Audio"
Try adjusting attributes for speaker and/or mic; try disabling noise filter
 
not much of a difference. What are you guys using - are you disabling filter and what are you setting speaker volume at?
Also i'm guessing mic volume refers to what I hear back on the blue iris side correct?
 
You must log in or register to reply here.
Top Bottom