Anyone know how to fix this

eggsan

Getting comfortable
Joined
Jul 24, 2015
Messages
619
Reaction score
528
for my dahua products, normally unplugging or powering off-an-on again, will reset the unit back to unlock. Which brand you are using?
 

tyaldo

n3wb
Joined
May 29, 2018
Messages
11
Reaction score
0
Location
westland
for my dahua products, normally unplugging or powering off-an-on again, will reset the unit back to unlock. Which brand you are using?
I tried that a few time and it didn’t work. It’s a hikvision system
 

eggsan

Getting comfortable
Joined
Jul 24, 2015
Messages
619
Reaction score
528
used long time ago, but basically it will allow you to edit some network parameters (your hik product), regarding resetting password, changing ip, and configure in general. After downloading the program, a pdf is included with instructions
 

eggsan

Getting comfortable
Joined
Jul 24, 2015
Messages
619
Reaction score
528
you may also check the firmware installed (listed as firmware version on the tool) at all cameras. Sometimes updating the firmware could help.
 

eggsan

Getting comfortable
Joined
Jul 24, 2015
Messages
619
Reaction score
528
There are many hik experts in this forum that will help you for sure. Good luck and stay safe!
 
Top