Anyone use Blue Iris with Omnipro II home automation?

[Plasman]

I'm hoping someone has experience with Blue Iris and Omnipro II 5.7e touchscreens? I've tried every URL I can think of in the PC Dealer Access HAI/Leviton software and can't bring up an image. The same URL works in a browser. The camera names do appear on the 5.7e, but I either get no image or a system hang.



Thanks much....

 

[bp2008]

My guess is the touchscreen's browser doesn't support javascript.

Have you considered mounting a little tablet on the wall instead?

 

[Plasman]

HAI/Leviton says that I must find a URL in this format that bypasses any login screen (in other words, goes right to a video when put in a browser).

http://IPAddress:Port/QueryString

Can I shut off local LAN authentication in Blue Iris and come up with a URL like that? Thanks for any ideas....

 

[Plasman]

I've now got my cameras appearing on my Omnipro 5.7e touchscreens. The image is small but actually quite clear. Ken, as usual had the link that would work- I needed to add a height command at the end of the URL. So here are the PC Dealer Access settings:

IP Camera Name: Any text
Type: MJPEG
URL: http://192.168.1.268:8080/mjpg/cam1/?h=240 use the Blue Iris local address and port, as well as cam number assigned by BI
Number: All cams can be called "One"
FPS: 5
Quality: High
Resolution: either 320x240 or 640x480 doesn't matter, but using ?h=480 does improve the image, although it slows things a bit.
Username: Blank
Password: Blank
Be sure to disable local LAN authentication in Blue Iris under the Webserver tab