Best Setting to capture face in night mode using ZE4 camera

What are you exposure settings for daytime? Are you using 'customized range' for the shutter speed?
 
Something is strange or my setting need adjustment..

Attached as you can see picture from today in daylight mode. The picture are capture around 11am and 2pm. and now at 5:21pm the picture is not clear is it because the sunlight is going down and not so bright? or is he walking too fast? the picture is blurr. anyone know how to fix this?

thank you

As @Holbs mentioned, biggest thing has increase your shutter speed. In color at night the 5442 does well at 1/120 or 1/60 if you have enough light.

The other thing to check is your DNR. Never more than 50, and 35-40 should be better. Too much DNR causes motion blur as well.
 
  • Like
Reactions: Parley
You are using backlight for that awkward shadow, so then you get this. Need to find the balance. And get off auto shutter as others have said.
 
Attached is the setting I have please let me know what needed to be change to take out the blurr.. thanks in advance..
 

Attachments

  • 2-10-2021 7-40-20 PM.png
    2-10-2021 7-40-20 PM.png
    41.2 KB · Views: 11
  • 2-10-2021 7-40-33 PM.png
    2-10-2021 7-40-33 PM.png
    36.2 KB · Views: 11
  • 2-10-2021 7-40-36 PM.png
    2-10-2021 7-40-36 PM.png
    19.8 KB · Views: 11
  • 2-10-2021 7-40-40 PM.png
    2-10-2021 7-40-40 PM.png
    16.9 KB · Views: 10
  • 2-10-2021 7-40-44 PM.png
    2-10-2021 7-40-44 PM.png
    21.2 KB · Views: 10
  • 2-10-2021 7-40-48 PM.png
    2-10-2021 7-40-48 PM.png
    16.9 KB · Views: 10
You will have to experiment with some of the settings. But having the exposure mode to auto will give you heartburn as the daylight gets low. Also as @bigredfish stated, you might have to cut down the 3D NR grade.
1613015558430.png

My daytime settings for that set is:
1613015605357.png
 
You should be able to be under 30 for NR in daytime. Go as low as you can before it is a noisy mess. Will also add some details back to some of those faces.
 
You should be able to be under 30 for NR in daytime. Go as low as you can before it is a noisy mess. Will also add some details back to some of those faces.
thank you!! i'll try to lower it in the daytime and see if its better..
 
And turn down that WDR, it also creates blur. 70 is wayyyyyyyy to high. Try 20 or below max and in fact turn it off.