BI changes cameras ip address automatically overnight

dholtz9

n3wb
Joined
Apr 5, 2020
Messages
9
Reaction score
1
Location
Escondido, CA
Hi -
any ideas why randomly BI changes several cameras all to the same ip address in BI? I woke up this morning and find most (not all) cameras have ip address of .33 as and ending. i have to edit each camera back to known IP and they work fine This has happened several times now.
Thank you,
Daniel
 
Joined
Sep 19, 2015
Messages
958
Reaction score
1,218
Location
Naples Fl
Hi -
any ideas why randomly BI changes several cameras all to the same ip address in BI? I woke up this morning and find most (not all) cameras have ip address of .33 as and ending. i have to edit each camera back to known IP and they work fine This has happened several times now.
Thank you,
Daniel
either you have a virus or China is messing with you
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
25,262
Reaction score
49,206
Location
USA
Lot's of threads on this.....

Blue Iris Configuration changing spontaneously
I have been running Blue Iris for years. Recently two of my Cameras started changing configurations spontaneously. The cameras have an assigned IP address of 10.0.1.213 (TH_Pointing SE) And 10.0.1.215 (THNE) They are configured with that address in Blue IRIS and the cameras are visible for a...


BI changed camera IP addresses
Updated to BI 5.6.2 the other day on one of my BI systems. Last night, the IP addresses of 2 of the cameras was changed in the BI configuration. I usually reserve .50-.200 for DHCP and the addresses in BI was configured for IP addresses in the DHCP range but I would never have put my cameras in...


5.6.2 - September 23, 2022
5.6.2 - September 23, 2022 The Camera Discovery window now finds MAC addresses along with IP addresses. You also have the option of using the previous ONVIF discovery, or the new full LAN IP and port scan. With this, it should no longer be necessary to use the external website service Advanced...



Unless you like headaches or don't care to be a beta tester (which we do need and are thankful of those doing that), once you find a stable version of BI, resist the urge to update until they add something that is of value to you. Especially now with all the frequent changes trying to get SenseAI to work more seamlessly.

I am still on 5.5.something because Deepstack simply works for me and I have seen lots of issues with the new SenseAI and nothing new has been added since my version that I care about. Most here do not update and do not have auto update on and only update when something new is added they want. Previously I was on an older version until substreams were introduced and then I stayed on that stable version until DeepStack was added then I went to that stable version, and I am holding tight there until something is added that I feel I need or would enhance my system. This MAC address thing is good for some, but as you are seeing, it can also be a headache.

Many people here are still on Version 4 because that works for them.
 
Top