Big update!! NVR5XXX-4KS2_MultiLang_V4.000.0000000.0.R.20190713

SergeyAU

Getting the hang of it
Joined
Feb 20, 2017
Messages
192
Reaction score
22
Looks like it is something wrong with my chinese camera then... What firmware do you have on your chinese cam?
whatever came with them =)
 

Denyskhud

n3wb
Joined
Dec 31, 2017
Messages
13
Reaction score
0
I flashed this Mod, maybe it caused the issue...
Don't you know how to downgrade or take an initial firmware for this chinese cam?
 

SergeyAU

Getting the hang of it
Joined
Feb 20, 2017
Messages
192
Reaction score
22
I flashed this Mod, maybe it caused the issue...
Don't you know how to downgrade or take an initial firmware for this chinese cam?
sorry, no idea
 

Denyskhud

n3wb
Joined
Dec 31, 2017
Messages
13
Reaction score
0
Just upgraded to 2019 firmware - all cameras work without reset. Do I need to reset NVR anyway?
And can you give me the link to 2021 firmware you mentioned? Thanks!
 

SergeyAU

Getting the hang of it
Joined
Feb 20, 2017
Messages
192
Reaction score
22
Just upgraded to 2019 firmware - all cameras work without reset. Do I need to reset NVR anyway?
And can you give me the link to 2021 firmware you mentioned? Thanks!
I just got it from Dahuas site. I have reset it just in case
 

SergeyAU

Getting the hang of it
Joined
Feb 20, 2017
Messages
192
Reaction score
22
OK. So far I have:
1. Issue with playback through the browser. It does not record main stream and IVS separately. It chops the main stream at the event time and saves the event as a separate file. Takes a bit to load it, so its not a smooth experience watching it through the browser. Seem to play ok through the app
2. Even though it looks like it can manage cameras, it reverts back to the old settings after some time (probably after camera reboot for maintenance). Have not checked to be sure

I think I will be going back to the old firmware. Did not see any improvements in the new one, apart from the security side of things
 

tigerwillow1

Known around here
Joined
Jul 18, 2016
Messages
3,816
Reaction score
8,424
Location
USA, Oregon
It chops the main stream at the event time and saves the event as a separate file. Takes a bit to load it, so its not a smooth experience watching it through the browser.
My 5216 has always closed the current file and created a new one when an event happens. The playback pause at the transition was a lot worse a couple of years ago than it is with newer firmware. For me, sometimes it's seamless and sometimes there's a slight pause.
 

Rockie

Young grasshopper
Joined
Oct 12, 2019
Messages
35
Reaction score
0
Location
Romania
I have
V4.002.0000000.3.R, Build Date: 22-03-2022 with problems on Dahua dh-nvr5232-4ks2
I have problems with recording on motion.
is there any new firmware?
Thank you
 

paul@austins.tv

Getting comfortable
Joined
Dec 4, 2015
Messages
286
Reaction score
267
A firmware update is unlikely to resolve the problems with recording via motion detection. It's more likely down to user errors.
Please elaborate on the exact problems.
 

Rockie

Young grasshopper
Joined
Oct 12, 2019
Messages
35
Reaction score
0
Location
Romania
It works for a few daus and after that I have two problems:
1. Motion disabled
Or
2. Motion mesh is dissapering
 

paul@austins.tv

Getting comfortable
Joined
Dec 4, 2015
Messages
286
Reaction score
267
I presume you have carried out a NVR reboot and factory defaults, in an effort to resolve? If not? I would expect this to hopefully assist.
 

TheDude

Getting the hang of it
Joined
Sep 4, 2018
Messages
91
Reaction score
44
Location
USA
Latest version is DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.6.R.221115

Maybe try updating to that one?

 

Rockie

Young grasshopper
Joined
Oct 12, 2019
Messages
35
Reaction score
0
Location
Romania
I don't remember if I've done a reset to defaults, but not I'm doing this.

1. Reset to defaults (except network and admin)
2. Upgrade to DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.6.R.221115
3. I'll recreate all the options.

I hope it will work.
 

paul@austins.tv

Getting comfortable
Joined
Dec 4, 2015
Messages
286
Reaction score
267
Motion detection activation should be active on each individual camera, separately. So to hopefully push the settings from each camera, after your update and reboot the NVR.
 
Joined
Sep 10, 2023
Messages
7
Reaction score
2
Location
Hamburg
After i upgraded to this firmware DH_NVR5XXX-4KS2_MultiLang_V4.002.0000000.6.R.221115 on my NVR5216-4KS2 (version 1?) motion detection on some older REVOTECH IPCs did not work anymore, audiosettings were not available any more.
 

MakeItRain

Pulling my weight
Joined
Aug 7, 2017
Messages
401
Reaction score
218
@EMPIRETECANDY

Everyone, what is the latest firmware to be using today for NVR5432-4KS2 (HW version 1) and NVR5208-4KS2 (HW version 2)??

Thanks.
 
Joined
Mar 7, 2019
Messages
360
Reaction score
879
Location
Missouri
 
Top